应用小干扰柱体控制角区马蹄涡结构的实验研究

本文提出一种简单的抑制和控制角区马蹄涡的被动控制方法.即在角区平板上游放置一个远小于主柱体的小干扰柱体,用其产生的弱马蹄涡来抑制和控制角区的马蹄涡结构.目的是使角区原来的马蹄涡结构由强变为弱、由大变为小、由多变为少、由非定常变为定常,以获得减小冲刷、抑制湍流、降低噪声、避免振动的工程效果.作者在风洞中采用烟线法和激光片光流动显示的方法开展研究,实验表明,在平板上游适当位置放置小干扰柱体的确可以有效抑制和控制角区马蹄涡结构.实验发现,当小干扰柱体放置在原角区马蹄涡生成区时,其抑制和控制效果最佳;当小干扰柱体放置在上游区或下游区时,控制效果不好.本文讨论了小干扰柱体控制角区马蹄涡的机理.此外,实验还研究了小干扰柱体相对尺度和截面形状对角区马蹄涡结构抑制和控制的影响.     

Cross-layer traffic analysis countermeasures against adaptive attackers of wireless sensor networks

Wireless Networks - In most Wireless Sensor Network (WSN) applications the sensor nodes forward their measurements to a central base station (BS). The unique role of the BS makes it a natural...     

Automated design algorithms for tactical wireless networks

To guide users who attempt to deploy wireless networks in military applications, there is an evolving need for developing systematic methodologies to analyze/predict the performance of mobile ad hoc networks (MANETs). In addition, the advance in cognitive networking research provides opportunities for exploiting unused spectrum to optimize throughput of MANETs. However, with the increasing number of parameters/constraints, there is even a more demanding need to develop automated methodologies to design/tune such networks.In this work, we study the concepts and challenges for automatic design/re-configuration of cognitive MANETs, in addition to proposing design automation algorithms. The paper is divided into two parts. In the first part, we describe the design objectives, imposed constraints, and involved parameters in MANET design. We discuss how cognitive techniques can be employed to exploit the unused spectrum in military architectures. We then discuss the challenges that face the design/re-configuration of a cognitive network and their implications at different network layers. We also describe possible implementation options for designing MANETs that employ cognitive features at all layers. In the second part of this work, we propose design automation algorithms for optimally setting parameters to achieve a desired objective and satisfy certain constraints. Despite providing the optimal configuration, the simple approach of testing all possible combinations of parameter settings has significant time complexity (the COMB approach). Thus, we propose a novel heuristic (Sequential Parameter Optimization or SEPO) for searching through the possible parameter settings and selecting the best design options. SEPO is efficient in terms of both convergence speed and parameter tuning. We also discuss the foundation for using supervised learning to speed up the design (search) process. By evaluating realistic design of military-like scenarios that require optimizing a diverse set of metrics, we show that SEPO generates comparable results to the optimal, straightforward (slow-converging) COMB approach that is based on exhaustive search.     

The modulation of PCSK-9 and GAGs by 10-dehydrogingerdione and pentoxifylline in hyperlipidemic rabbits

Abstract

The hypolipidemic effect of 10-DHGD was previously reported owing to its anti-inflammatory and anti-oxidant properties. We further investigated the anti-inflammatory role of 10-DHGD in modulating atherogenicity by targeting proproteinconvertasesubtilisinkexin-9 (PCSK-9). Rabbits fed high cholesterol diet (HCD) containing 0.2% w/w cholesterol for12-weeks received either 10-DHGD (10-mg/kg), pentoxifylline (PTX, 40-mg/kg) or their combination concurrently with HCD. Lipid profile, serum PCSK-9, macrophage migration inhibitory factor (MIF), aorta tumor necrosis factor- alpha (TNF-α) and glycosaminoglycans (GAGs) were measured. Atherogenicity and increased PCSK-9, MIF and TNF-α and GAGs (p?<?0.001) was proved HCD-fed rabbits. The concurrent administration of 10-DHGD or PTX with HCD feeding prevented this atheogenicity by modulating the release of PCSK-9, inflammatory markers and GAGs. The combined PTX and 10-DHGD in HCD fed rabbits not only lowered hyperlipidemia, but also targeted arterial inflammation to a better extent. In conclusion PTX and 10-DHGD can prevent hyperlipidemia and associated inflammatory process modifying factors predisposing to atherosclerosis.     

Assessment of Solder Joint Fatigue Life Under Realistic Service Conditions

The behavior of lead-free solder alloys under complex loading scenarios is still not well understood. Common damage accumulation rules fail to account for strong effects of variations in cycling amplitude, and random vibration test results cannot be interpreted in terms of performance under realistic service conditions. This is a result of the effects of cycling parameters on materials properties. These effects are not yet fully understood or quantitatively predictable, preventing modeling based on parameters such as strain, work, or entropy. Depending on the actual spectrum of amplitudes, Miner’s rule of linear damage accumulation has been shown to overestimate life by more than an order of magnitude, and greater errors are predicted for other combinations. Consequences may be particularly critical for so-called environmental stress screening. Damage accumulation has, however, been shown to scale with the inelastic work done, even if amplitudes vary. This and the observation of effects of loading history on subsequent work per cycle provide for a modified damage accumulation rule which allows for the prediction of life. Individual joints of four different Sn-Ag-Cu-based solder alloys (SAC305, SAC105, SAC-Ni, and SACXplus) were cycled in shear at room temperature, alternating between two different amplitudes while monitoring the evolution of the effective stiffness and work per cycle. This helped elucidate general trends and behaviors that are expected to occur in vibrations of microelectronics assemblies. Deviations from Miner’s rule varied systematically with the combination of amplitudes, the sequences of cycles, and the strain rates in each. The severity of deviations also varied systematically with Ag content in the solder, but major effects were observed for all the alloys. A systematic analysis was conducted to assess whether scenarios might exist in which the more fatigue-resistant high-Ag alloys would fail sooner than the lower-Ag ones.     

Study of Hadrons Produced in Proton—Carbon Interactions at 120 GeV/c Using Hadron-Production Models

Physics of Atomic Nuclei - Double differential yield of π±, K±, protons, and antiprotons as a function of laboratory momentum is presented using hadron production models. This study...     

Detection of Antipersonnel Mines by Using the Factorization Method on Multistatic Ground-Penetrating Radar Measurements

The factorization method (FM) has been applied to measurement data from a multistatic ground-penetrating radar operating in close proximity to the ground, which was used in a measurement campaign on the Joint Research Centre mine test lane in Ispra, Italy. This paper is targeted toward a future hand-held demining system. The according space limits restrict an independent positioning of transmit and receive antennas. Hence, very small multistatic datasets are obtained, representing a difficult case for the reconstruction with the FM