C波段平面异向介质设计及其后向波特性验证

提出了一种工作在C波段的新型平面结构异向介质，它除了带宽宽和损耗小外，还具有体积小、结构简单的优点，而且能够实现工作频段的平移，频率平移范围为4—20 GHz.基于电磁波由自由空间入射半无限大异向介质平板的传输和反射数据，计算出了电波在其中传播时的相速随频率的变化曲线，结果表明所讨论的异向介质确实在预想的频段上表现出后向波特性；同时利用相位观察法进一步验证了上述的后向波特性，从而肯定了异向介质的存在. 关键词： 异向介质 宽频带 小单元 后向波特性     

基于半像素错位的多幅图像重建高分辨率图像技术研究

介绍了一种基于半像素错位的多幅图像重建高分辨率图像技术。分析了半像素错位的多幅图像与高分辨率图像各像素灰度值的对应关系 ,并从CCD数字化采样的角度进行了论证。同时 ,结合实际摄像机CCD结构 ,求出了高分辨率图像重建的计算公式 ,并通过实验进行了验证和完善。重建的本质是以原高分辨率图像的 4邻域平均图像为基础 ,增加一定比例的边缘细节信息 ,去接近原高分辨率图像。CCD的动态范围越大 ,图像的灰度级越多 ,那么计算误差就越小 ,图像的边缘细节信息就可以利用更多 ,重建的图像就越接近原高分辨率图像。通过实验和分析表明 ,利用半像素错位的多幅低分辨率图像重建高分辨率图像的原理是正确的 ,方案是可行的     

HeI photoelectron spectroscopic (PES) and quantum chemistry study on the dimeric compound of 2(5H) furanone

The He1 photoelectron (PE) spectra of both 2(5H) furanone and itstrans-chair-dimeric-compound (t-c-DFN) are reported. The assignment of the PES bands is made on the basis of band shapes, the PES results of the molecules which have the similar atomic groups, and the restricted Hartree-Fock (RHF) calculations for the molecules studied. From the results of both PES experimental and theoretical calculations, it is proved that the ionization potential (IPS) of the HOMO for the dimeric-compound is lower than that of the HOMO for the monomer. And the total energy computed for thet-c-DFN is the lowest in the four possible configurations of dimeric-compounds of 2(5H) furanone. Therefore the synthesis oft-c-DFN is also the easiest. Project supported by the National Natural Science Foundation of China.     

多约束下的串、并联混合系统可靠度与冗余度的优化判定模型及算法

本文给出了单目标多约束下串、并联混合系统中 ,由选取重要单元 (重要度最大的单元 )的方法 ,来提高系统可靠度的有效优化判定模型及算法 ,用同样思想给出了串、并联系统中冗余度的优化判定模型及算法     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

The ordinary quiver of a weight three block of the symmetric group is bipartite

Suppose F is a field of characteristic p?5, and that B is a p-block of the symmetric group Sn of defect 3. We prove that the Ext¹-quiver of B is bipartite, with the bipartition being described in a simple way using the leg-lengths of p-hooks of partitions.     

氟碳铈矿／直氟碳钙铈矿混层结构中新规则混层矿物的超微结构研究

用电子衍射和晶格像技术研究了钙稀土氟碳酸盐矿物中的氟碳铈矿（Ｂ）／直氟碳钙铈矿（Ｓ）混层结构，发现并确定了Ｂ＿４Ｓ＿４、Ｂ＿８Ｓ＿６、Ｂ＿１Ｓ＿６、Ｂ＿７Ｓ＿４和Ｂ＿２Ｓ＿１５种新规则混层矿物的对称性、晶胞参数及理论晶体化学式。根据所获得的高分辨晶格像真实而直观地揭示出该类Ｂ＿ｍＳ＿ｎ（ｍ＞ｎ）型新规则混层矿物的长周期有序堆垛结构特征及变化规律。     

脉冲激光LGA法钛表面氮化及其XRD和SEM微观分析

用调Ｑ－ＹＡＧ和ＸｅＣｌ脉冲激光在钛表面以激光气体合金化方法生成氮化钛层，用Ｘ射线衍射仪分析了不同激光能量、不同Ｎ２气压不同作用脉冲数等条件下ＴｉＮ的结晶取向、结晶形态、氮化程度，用扫描电镜观察了它们的微观结构，对脉冲激光的ＬＧＡ法机理进行了探讨，也发现了用ＬＧＡ法对Ｍｏ的氮化生成Ｍｏ２Ｎ．     

一种基于神经网络的模糊推理方法

对于Zadeh的模糊关系合成法则（简称CRI方法），选择一个适宜蕴涵关系矩阵是至关重要的。通常蕴涵关系矩阵的元素值是通过一个所构造的数学表达式计算的，或是由领域专家凭经验直接给出。然而，有时，特别是对于后一种情形，CRI法不能满足模糊推理最基本的一致性要求。文章构造了一个神经网络用于模糊推理，新方法不仅是CRI方法的推广，而且远比CRI方法易于满足推理的一致性要求。得益于神经网络的长处，新方法具有灵活性、可调性。文章给出了权值的具取值法。