Catalytic Self-Hydrogenation of Anthracene in the Presence of a Magnesium–Anthracene Adduct

The catalytic properties of cluster magnesium derivatives were studied using the self-hydrogenation reaction of unsaturated compounds as an example. In the presence of a cluster magnesium–anthracene adduct at 150–298 K, the self-hydrogenation of anthracene occurred with yields of up to 40 molecules per atom of magnesium.     

Experimental evidence for anisotropic response of a driven vortex lattice

We present kinetic inductance measurements in current driven Josephson junction arrays. Measurements performed with circular coils indicate that this technique is very sensitive to the vortex mobility. Results obtained with anisotropic detection coils provide experimental evidence for the anisotropic response of a driven vortex lattice. Anisotropic behavior is obtained when rising the temperature or the mean vortex velocity as indicated by the loss of the superconducting shielding capability, first in the direction of vortex motion and then in the perpendicular direction.     

Effect of secondary electrons from latent tracks created in YBCO by swift heavy ion irradiation

Swift heavy ions (SHI) with electronic energy loss exceeding a value of 14.4 keVnm⁻¹ create amorphized latent tracks in YBCO type superconductors. In the low fluence regime of an ion beam where tracks do not overlap, a decrease of the superconducting transition temperature as probed through resistivity studies, is not expected due to availability of percolating current paths. The present study however shows T_c decrease by about 1–3 K in thin films of YBCO when irradiated by 250 MeVAg ions at 79 K at a fluence of 5×10¹⁰–1×10¹² ionscm⁻². The highest fluence used in the present study is three times less than the fluence where track overlapping becomes significant. The T_c tends to increase towards the preirradiation value on annealing the films at room temperature. To explain this unusual result, we consider the effect of ion irradiation in inducing materials modification not only through creation of amorphized latent tracks along the ion path, but also through creation of atomic disorder in the oxygen sublattice in the Cu–O chains of YBCO by the secondary electrons. These electrons are emitted radially from the tracks during the passage of the SHI. Considering the correlation between the charge state of copper and its oxygen coordination, we show in particular that the latter process is a consequence of the inelastic interaction of the SHI induced low-energy secondary electrons with the YBCO lattice, which result in chain oxygen disorder and T_c decrease.     

Radiospectroscopic and dielectric spectra of nanomaterials

The shape of lines in the radiospectroscopic (NMR and EPR) and dielectric spectra of materials formed by nanoparticles (hereafter, nanomaterials) is analyzed theoretically. The theory is developed in the framework of the core and shell model according to which a nanoparticle consists of two regions whose properties are affected and unaffected by the surface, respectively. The changes in the resonance frequency, the relaxation time, and the static permittivity due to the surface tension are taken into account, and the Gaussian and Lorentzian shapes of homogeneously broadened lines are considered. The inhomogeneous broadening of the spectral lines is examined for several types of nanoparticle size distributions. It is demonstrated that the splitting of the initial lines in the spectra of bulk systems into pairs of lines with a decrease in the particle size is a specific feature of the spectra of nanoparticles. The intensities and half-widths of the lines are investigated as functions of the parameters of the size distribution of nanoparticles. The results of theoretical calculations are compared with recent experimental data on the ¹⁷O and ²⁵Mg NMR spectra of nanocrystalline MgO. The theoretical dependences of the intensity, the resonance frequency, and the half-width of the spectral lines are in good agreement with the experimental data. The proposed theory offers a satisfactory explanation of the behavior of the static permittivity in BaTiO₃ ceramic materials with nanometer-sized grains.     

Numerical determination of the density profile of an inhomogeneous membrane: solution of the inverse vibration problem

Given one or more vibrational modes of a membrane, the free vibration equation can be applied to infer the mass surface density. This paper considers determining the surface density of an inhomogeneous membrane from digitized holographic projections (interferograms) of the modeshapes. Spatially discrete numerical models of the membrane surface are presented, which can be used to solve both forward and inverse vibration problems. The accuracy of the discrete models is examined for exactly solvable free vibration problems involving inhomogeneous membranes. For the solution of the inverse problem, error estimates are given for the mass surface density deduced from modeshape interferograms. The practicability of the method is investigated using simulated experimental data for membranes with composite and continuously inhomogeneous density profiles. Strategies are discussed for reducing errors in the reconstructed densities.     

Brightness and decay time of Zn2SiO4:Mn phosphor particles with spherical shape and fine size

Green-light-emitting Zn₂SiO₄:Mn phosphor particles were synthesized by modified large-scale spray pyrolysis using a colloidal solution containing fumed silica particles. The particles had a fine size, filled morphology, spherical shape and non-aggregation characteristics even after post-treatment at 1150 °C. The luminescence characteristics of Zn₂SiO₄:Mn phosphor particles having spherical shape, such as brightness and decay time under VUV excitation light, were investigated as a function of Mn content. The luminescence intensity exhibits a maximum at 5 mol% Mn-doped powder. The decay time increases consistently with decreasing Mn content and more saturated color coordinates are obtained with the composition having 12 mol% Mn. As a consequence, the 10 mol% Mn-doped powder proved to provide a good combination of favorable luminance and acceptable decay time. The influence of post-treatment temperature on the decay time and photoluminescence characteristics of Zn₂SiO₄:Mn particles was also investigated. Particles post-treated at 1155 °C had the maximum photoluminescence intensity, which was identical to 113% that of the commercial product, and a comparable decay time of 5.8 ms. PACS 81.20.Rg; 78. 55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

A transmit MIMO scheme with frequency domain pre-equalization for wireless frequency selective channels

In this paper, we introduce a transmit multiple-input multiple-output (MIMO) scheme with frequency domain pre-equalization for a multipath or frequency selective channel. In this scheme, MIMO processing in the frequency domain is performed at the transmitter or base station so that the receiver or mobile station only requires limited processing. This scheme provides high data rates and also inherits from the frequency domain equalization the property of relatively low complexity in severe multipath environments. The MIMO transmit processing is derived by minimizing the minimum mean square errors (MMSE), and expressions for the signal-to-interference-plus-noise ratio and error probability based on the Gaussian approximation of the interference term are provided. Some important associated issues, such as channel errors and computational complexity, are also investigated. Numerical simulations are also provided and these demonstrate the improved performance of our proposed scheme compared to other transmit MIMO schemes. In particular, they show that the proposed system can attain multipath or frequency diversity of the channel.     

Chemical compositions and optical properties of HfOxNy thin films at different substrate temperatures

High-k HfO_xN_y thin films have been grown by radio frequency (rf) reactive sputtering of metal Hf target in N₂/Ar/O₂ ambient at different substrate temperatures. The chemical compositions of the films have been investigated as a function of substrate temperature by X-ray photoelectron spectroscopy (XPS). XPS measurements showed that nitrogen concentration increases with an increase in substrate temperature. Room-temperature spectroscopic ellipsometry (SE) with photon energy 0.75–6.5 eV was used to investigate the optical properties of the films. SE results demonstrated that refractive index n increases with an increase in substrate temperature. Based on TL parameters which were obtained from the best fit results used in a simulation of the measured spectra, meanwhile, we conclude that the energy band gap (E_g) decreases with an increase in substrate temperature.     

掺杂铁电纳米粉的液晶的电光特性

铁电纳米粒子悬浮在向列相液晶母体中，增强介电各向异性，而且对施加的电场信号敏感。本文也展示了纳米粒子对所述复合材料可实现的总的相变的作用。这种方法也许可应用于设计新型显示材料。