Mechanical properties of polyester polymer-concrete

The properties of a polymer-concrete composed of polyester matrix and locally available rock aggregate are investigated. The formula of the concrete is found by an experimental-calculation approach in such a way as to attain a closer packing of the aggregate particles on the one hand, and to ensure the needed processing characteristics (placeability) of the mix on the other. It is shown experimentally that the material obtained has a rather high compression strength. Under prolonged compression loads, the polymer-concrete exhibits a noticeable creep behavior with a linear relation between the creep strains and stresses. After the action of half the ultimate load over 3000 h, the total strains exceed the instantaneous ones by 2.0 to 2.2 times. The accumulation of irreversible strains is also observed; however, their contribution to the total strain is small. It is found that the stress-strain relation can be represented by the equation of linear hereditary creep theory.Institute of Polymer Mechanics, University of Latvia, Riga, LV-1006, Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 2, pp. 147–162, March–April, 1999.     

Selective photoconductivity induced in PbTe(Ga) by a local phonon mode

Selective photoconductivity at frequency ω=155 cm⁻ was discovered in PbTe(Ga) narrow-gap semiconductors at liquid-nitrogen temperatures. The corresponding energy is much lower than all characteristic energies of the electronic spectrum of the semiconductor. The effect is attributed to optical excitation of a local vibrational mode of an impurity center leading to delocalization of the electrons. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 5, 342–346 (10 March 1996)     

Truly temperature independent current conveyor precision rectifier

A current conveyor based rectifier circuit with very low temperature sensitivity is presented. The use of a current mirror arrangement to bias the rectifying diodes provides higher temperature stability than previously reported designs. The output offset voltage is easily adjustable to the desired optimum level     

Efficient computation of time-varying and adaptive filters

Two techniques for efficient computation of filters that support time-varying coefficients are developed. These methods are forms of distributed arithmetic that encode the data, rather than the filter coefficients. The first approach efficiently computes scalar-vector products, with which a digital filter is easily implemented in a transpose-form structure. This method, based on digital coding, supports time-varying coefficients with no additional overhead. Alternatively, distributed-arithmetic schemes that encode the data stream in sliding blocks support efficient direct-form filter computation with time-varying coefficients. A combination of both of these techniques greatly reduces the computation required to implement LMS adaptive filters     

Minimum-phase filter design from linear-phase startpoint viabalanced model truncation

A new practical design approach for minimum-phase FIR or IIR filters, setting out from a high dimensionality FIR linear-phase prototype is described. The novelty of this technique lies in overcoming the inherent problem of finding the roots of a high order polynomial with repeated and/or very closely clustered roots     

Phasenbeziehungen und Natriumionenleitung im quasi-binären System Na2SiF6/Na3AlF6

Phase Relations and Sodium Ion Conductivity within the Quasi-binary System Na₂SiF₆/Na₂AIF₆ . The phase diagram of the Na₂SiF₆/Na₃AlF₆ system has been determined by means of x-ray powder diffraction, thermal analysis and conductivity measurements in the sub-solidus region. Na₃AlF₆ accomodates up to 73 mol.-% Na₂SiF₆ maintaining the crystal structure type. The sodium ion conductivity increases by about five orders of magnitude upon doping Na₃AlF₆ with Na₂SiF₆.     

The lead tetraacetate oxidation of bisacylhydrazones of α-diketones: A scope re-assesment

Oxidation of the title compounds yields, besides the reported isoimides 3 and/or the amides 4 , also the imides 5 . The observed product dichotomy is considered as the result of an intramolecular nucleophilic attack on the aroyl group, of the pressumed zwitterionic intermediate 2 , by O or N present in the ambident N-aroylimine site of 2 . The results of AM1 calculations agree with the product studies and both permit the formulation of a set of rules correlating structure and selectivity.     

Afterburner [network-independent card for protocols]

Many current implementations of protocols such as the Transmission Control Protocol/Internet Protocol (TCP/IP) are inefficient because data are often accessed more frequently than necessary. Three techniques that reduce the need for memory bandwidth are proposed. The techniques are copy-on-write, page remapping, and single-copy. Afterburner, a network-independent card that provides the services that are necessary for a single-copy protocol stack, is described. The card has 1 MByte of local buffers and provides a simple interface to a variety of network link adapters, including HIPPI and asynchronous transfer mode (ATM). Afterburner can support transfers to and from the link adapter card at rates up to 1 Gbit/s. An implementation of TCP/IP that uses the features provided by Afterburner to reduce the movement of data to a single copy is discussed. Measurements of the end-to-end performance of Afterburner and the single-copy implementation of TCP/IP are presented     

Optoelectronic buses for high-performance computing

Modern computer buses are typically organized by the three functions of data transfer, addressing, and arbitration/control. In this paper we present a fiber-based bus design which provides optical solutions for each of these functions. The design includes an all-optical addressing system, based on coincident pulse addressing, which eliminates the latency contribution and bandwidth limitation associated with electronic address decoding. The control system uses time-of-flight relationships between a priority chain and a feedback waveguide to implement fully distributed asynchronous and self-timed bus arbitration