Studies on polymers and composites from lignin and fiber derived from sugar cane

Sugarcane fiber (i.e. bagasse) lignin has a larger fraction of aromatics unsubstitution in the ortho position than hardwood or softwood lignin and hence has the greater ability to be derivatized. Furthermore, organosolv lignin has a higher purity than sulfonated and kraft lignins. This work examines the purification of organosolv lignin derived from bagasse and the physico‐chemical properties of the lignin and lignin‐phenol formaldehyde (PF) resin coatings, and composites. The wetability tests have shown that lignin and lignin‐PF resin films are effective water barrier coatings, though the contact angles of lignin‐PF resin films were considerably less than the wax films. The overall mechanical properties (i.e. peak stress, peak strain and modulus) of the bagasse fiber composites were lower than the values obtained with the composites without the inclusion of bagasse fiber. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical Study of Weakly Bound Dimers between Hydrogen Fluoride and Some Polar Molecules

Weakly bound linear and bent dimers, FH—X (where X = CO, OC, CNH, NCH, N₂O and ON₂), are investigated using the DFT B3LYP and ab initio MP2 methods with the same basis sets (6–311++G(3df,2pd)). The strengths of the H—C or H—N H‐bonds in dimers FH—CO, FH—CNH, and FH—N₂O are compared with those of the H—O or H—N H‐bonds in dimers FH—OC, FH—NCH, and FH—ON₂. The results obtained for the H‐bond distances, the elongation effect of the HF bond, the red shift of the HF stretching frequency, and the energy difference between the dimer and the charge transfer reveal that the H‐bonds of the first group of dimers are stronger than those of the second. The Gibbs energies calculated for the six dimer formations indicate that the weakly bound dimers are unstable at room temperature (T = 298 K) (FH—X's → FH + X's, ΔG < 0).     

Analysis of an ancient bronze statue by external beam pixe

A quantitative analysis of an ancient Buddha statue was performed by external beam Proton Induced X-ray Emission for the purpose of identifying its originality. It is shown how the PIXE method can be applied for archeological study. The elemental composition of the statue is compared with that of several samples with definite ages. The experiment was performed by extracting 2.4 MeV proton beam through a 2 mm diameter collimator and 7.6 m kapton foil to the He atmosphere. X-rays were measured by a Si(Li) detector. The analysed elements were Fe, Cu, Ag, Au and Hg for gold coating and Fe, Ni, Cu, Zn, As, Ag, Sn, Au, Pb and Bi for bronze body.     

Stacking sequence effect of aramid–UHMPE hybrid composites by flexural test method: MATERIAL PROPERTIES

Aramid fibre–ultra-high modulus polyethylene (UHMPE) fibre interply hybrid composites were fabricated with changes in the stacking sequence. The flexural strength and modulus of hybrid composites were measured in order to investigate the effect of stacking sequence. Scanning electron microscopy (SEM) was used to examine the fracture surface of interply hybrid composites. When aramid fibre was at the compressive side and dispersion extent of fibers was small, the higher flexural strength and positive hybrid effect were observed. In addition, the different stacking sequence resulted in a change in flexural failure mechanism which had an effect on the flexural strength. As the dispersion extent of fibers decreased, the introduction of cohesive failure in aramid–aramid interface and PE–PE interface improved the flexural strength of hybrid composites.     

The measurement of rates of initiation in the thermal polymerization of styrene

The thermal initiation of the polymerization of styrene has been studied at temperatures from 60–140°C using DPPH as a free radical scavenger. Rates of free radical formation, measured by the decrease in absorbance at 525 nm, are about seven times greater than those obtained from inhibition period measurements. The difference is probably due to the much greater reactivity of trinitrobenzene derivatives towards diradicals from styrene than towards styryl monoradicals. This view is supported by the different behaviour of the AIBN initiated polymerization of styrene in the presence of DPPH. The thermal initiation process has a low efficiency of initiation and the activation energy is 121 kJ/mole. The results strongly support the diradical mechanism for the thermal initiation of styrene polymerization.     

The effect of molecular planarity on crystal non‐centrosymmetry in benzyl­idene–aniline derivatives

In the title compound, N‐(2‐methoxy­phenyl)‐4‐nitro­benzyli­deneamine, C₁₄H₁₂N₂O₃, the two phenyl rings make a dihedral angle of 48.0 (2)° and the nitro group is at an angle of 6.5 (1)° with respect to its attached phenyl ring. In the crystal structure, mol­ecules are related as centrosymmetric pairs through π–π interactions and are further connected through strong C—H?O hydrogen bonds [C?O 3.4259 (17) Å and C—H?O 167°], forming molecular stacks along [100]. These stacks associate further through longer C—H?O interactions, forming two‐dimensional networks. In the c direction, there are only weak van der Waals interactions. The relationship between the molecular planarity and its centrosymmetry is also briefly described.     

A unique tautomer of 1‐n‐hexyl‐3‐phenyl‐1H‐pyrazol‐5‐ol

In the title compound, C₁₅H₂₀N₂O, the bond distances and angles are consistent with the presence of the hydroxy tautomer. This tautomer was unambiguously determined by the clear presence of a H atom bonded to oxygen, as well as the total absence of any residual electron density around the N atom in the heterocycle, thus precluding any possibility of desmotropism.     

Hydrogen bonding and π–π stacking in 6‐hydroxy­biochanin A monohydrate

In the lattice of the title compound (systematic name: 5,6,7‐trihydroxy‐4′‐meth­oxy­isoflavone monohydrate), C₁₆H₁₂O₆·H₂O, the isoflavone mol­ecules are linked into chains through R₄³(17) motifs composed via O—H⋯O and C—H⋯O hydrogen bonds. Centrosymmetric R₄²(14) motifs assemble the chains into sheets. Hydrogen‐bonding and aromatic π–π stacking inter­actions lead to the formation of a three‐dimensional network structure.     

DNA-templated self-assembly of protein and nanoparticle linear arrays

Self-assembling DNA tiling lattices represent a versatile system for nanoscale construction. Self-assembled DNA arrays provide an excellent template for spatially positioning other molecules with increased relative precision and programmability. Here we report an experiment using a linear array of DNA triple crossover tiles to controllably template the self-assembly of single-layer or double-layer linear arrays of streptavidin molecules and streptavidin-conjugated nanogold particles through biotin-streptavidin interaction. The organization of streptavidin and its conjugated gold nanoparticles into periodic arrays was visualized by atomic force microscopy and scanning electron microscopy.