Translating Molecular Recognition into a Pressure Signal to enable Rapid,Sensitive, and Portable Biomedical Analysis

Herein, we demonstrate that a very familiar, yet underutilized, physical parameter—gas pressure—can serve as signal readout for highly sensitive bioanalysis. Integration of a catalyzed gas‐generation reaction with a molecular recognition component leads to significant pressure changes, which can be measured with high sensitivity using a low‐cost and portable pressure meter. This new signaling strategy opens up a new way for simple, portable, yet highly sensitive biomedical analysis in a variety of settings.     

Aggregation‐Induced Emission of Hexaphenyl‐1,3‐butadiene

A new type of AIE molecules based on hexaphenyl‐1,3‐butadienes was reported with respect to the synthesis and characterization. This material exhibited different maximum emission wavelength and enhanced emission intensity at different aggregate state (amorphous and crystalline state).     

(+)-柳杉酚的简便合成

报道了两种(+)-柳杉酚(6)的简便合成路线。路线1:脱氢枞胺(1)经脱氨还原,12-位Friedele-Crafts乙酰化,Baeyer-Villiger氧化,7-位氧化和水解5步反应合成了6,总产率18.6%。路线2:1经脱氨还原和7-位氧化反应制得7-氧代脱氢松香烷(7);7与过氧化邻苯二甲酰反应,然后水解合成了6,总产率22.0%。6的结构经1H NMR,IR,TOF-MS和元素分析确证。     

Determination of phthalate esters from environmental water samples by micro‐solid‐phase extraction using TiO2 nanotube arrays before high‐performance liquid chromatography

We describe a highly sensitive micro‐solid‐phase extraction method for the pre‐concentration of six phthalate esters utilizing a TiO₂ nanotube array coupled to high‐performance liquid chromatography with a variable‐wavelength ultraviolet visible detector. The selected phthalate esters included dimethyl phthalate, diethyl phthalate, dibutyl phthalate, butyl benzyl phthalate, bis(2‐ethylhexyl)phthalate and dioctyl phthalate. The factors that would affect the enrichment, such as desorption solvent, sample pH, salting‐out effect, extraction time and desorption time, were optimized. Under the optimum conditions, the linear range of the proposed method was 0.3–200 μg/L. The limits of detection were 0.04–0.2 μg/L (S/N = 3). The proposed method was successfully applied to the determination of six phthalate esters in water samples and satisfied spiked recoveries were achieved. These results indicated that the proposed method was appropriate for the determination of trace phthalate esters in environmental water samples.     

Electrochemical properties of niobium and phosphate doped spherical Li-rich spinel LiMn2O4 synthesized by ion implantation method

Spherical Li-rich lithium manganese oxide(LMO) spinel material was synthesized by an ion implanted method assisted by polyalcohol doped with Niobium and Phosphate simultaneously.The material was characterized by scanning electron microscopy,X-ray diffraction and BET specific surface area analysis.The electrochemical performances were investigated with galvanostatic techniques and cyclic voltammetry.The synthesis process was investigated with TG/DSC.The results show that the lithium ion can be immersed into the pore of manganese dioxide at a low temperature with the ion implanted method.The prepared materials have a higher discharge capacity and better crystallization than those prepared by solid phase method.The doped Nb can improve the capacity of the Li-rich LMO spinel and reinforce the crystal growth along(111) and(400) planes.The crystal grains show circular and smooth morphology,which makes the specific surface area greatly decreased.Phosphate-doped LMO spinel exhibits good high-rate capacity and structure stability.The prepared Li_(1.09)Mn_(1.87)Nb_(0.031)O_(3.99)(PO_4)_(0.021)delivers a discharge capacity of 119mAhg~(-1) at 0.2C(1C=148mAg~(-1)) and 112.8 mAhg~(-1) at 10 C,the discharge capacity retention reaches 98% at 1 ℃ after 50 cycles at 25 ℃ and 94% at 55 ℃.     

去甲万古霉素群体药代动力学与药效学优化研究

目的研究去甲万古霉素群体药代动力学指标差异,对患者进行药效学优化。方法选取2015年1月至2015年12月268例感染患者,将其按照年龄分为中青年组和老年组,每组各134例,采用群体药代动力学和药效学优化公式进行计算,分析患者上述指标差异。结果青年组与老年组的群体药代动力学各项指标差异明显具有统计学意义(P0.05)。结论感染患者通过去甲万古霉素药物治疗疗效确切,对革兰阳性菌的杀灭作用明显,采用群体药代动力学和药效学研究后发现,AUC24/MIC能够作为去甲万古霉素的应用指标,并以此指导临床用药效果显著,值得临床应用推广。     

固相萃取–高效液相色谱法测定地表水中4种磺胺类抗生素

建立固相萃取–高效液相色谱法测定地表水中磺胺嘧啶、磺胺二甲嘧啶、磺胺氯哒嗪、醋磺胺甲恶唑4种磺胺类抗生素。样品采用HLB柱进行萃取富集,流动相为甲醇–水(体积比为20∶80),流量为0.5 m L/min,用SPD检测器检测,检测波长为270 nm;采用外标法定量。4种磺胺类抗生素质量浓度在4~160 ng/L范围内与色谱峰面积的线性关系良好,相关系数不低于0.998 2,方法检出限为1.0~1.7 ng/L,样品加标回收率为75.2%~97.4%,测定结果的相对标准偏差为2.8%~6.1%(n=7)。该方法操作简便,灵敏度高,可用于地表水中磺胺类抗生素的检测。     

橡胶在动态载荷下的能量损耗分析

以交联密度不同的同类轮胎胎面胶A1和A2为研究对象,通过动态拉伸实验得到储能模量及损耗模量随频率变化的曲线.建立了黏弹性广义Maxwell模型来定量分析不同温度的橡胶在不同频率的动态载荷下的能量损耗.采用非线性规划的方法分别在低频(10~25 Hz)及高频(25~60 Hz)下拟合模量-频率曲线,得到黏弹性广义Maxwell模型的参数值.采用有限元软件Abaqus模拟胎面胶动态拉伸过程并计算胎面胶的损耗角正切,得到不同温度下胎面胶的损耗角正切随激振频率的变化规律,通过和实验结果的比较证明文中所述黏弹性广义Maxwell模型及其参数获取方法可准确应用于胎面胶的动态拉伸性能分析.预测了在不同温度及频率下每一循环载荷周期中胎面胶的应力-应变迟滞回线以及单位体积胶料的能量损耗,阐释了不同温度下的胎面胶的能量损耗随频率的变化规律,同时结合2种胎面胶的交联密度测试数据分析了胶料的构效关系.     

Brauer代数的中心维数问题

Brauer代数B_n(t)是一种在表示论,数学物理中重要的带一个参数t的有限维代数.当t取普通值时它们的结构已经了解得比较清楚,例如,不可约表示分类.当t取某些特殊值时有关它们还仍有些问题未探明.本文讨论任意参数时Brauer代数的中心的维数问题.主要结论是当t取某些特殊值时,Brauer代数中心的维数必定大于或等于t取普通值时它们的维数.