Silaffin Peptides as a Novel Signal Enhancer for Gravimetric Biosensors

Application of biomimetic silica formation to gravimetric biosensors has been conducted for the first time. As a model system, silaffin peptides fused with green fluorescent protein (GFP) were immobilized on a gold quartz crystal resonator for quartz crystal microbalances using a self-assembled monolayer. When a solution of silicic acid was supplied, silica particles were successfully deposited on the Au surface, resulting in a significant change in resonance frequency (i.e., signal enhancement) with the silaffin–GFP. However, frequency was not altered when bare GFP was used as a control. The novel peptide enhancer is advantageous because it can be readily and quantitatively conjugated with sensing proteins using recombinant DNA technology. As a proof of concept, this study shows that the silaffin domains can be employed as a novel and efficient biomolecular signal enhancer for gravimetric biosensors.     

Etching Characteristics and Mechanisms of Mo and Al2O3 Thin Films in O2/Cl2/Ar Inductively Coupled Plasmas: Effect of Gas Mixing Ratios

An investigation of etching behaviors for Mo and Al₂O₃ thin films in O₂/Cl₂/Ar inductively coupled plasmas at constant gas pressure (6 mTorr), input power (700 W) and bias power (200 W) was carried out. It was found that an increase in Ar mixing ratio for Cl₂/Ar plasma results in non-monotonic etching rates with the maximums of 160 nm/min at 60 % Ar for Mo and 27 nm/min at 20 % Ar for Al₂O₃. The addition of O₂ in the Cl₂/Ar plasma causes the non-monotonic Mo etching rate (max. 320 nm/min at 40–45 % O₂) while the Al₂O₃ etching rate decreases monotonically. The model-based analysis of etching kinetics allows one to relate the non-monotonic etching rates in Cl₂/Ar plasma to the change in the etching regime from the ion-flux-limited mode (at low Ar mixing ratios) to the neutral-flux-limited mode (for high Ar mixing ratios). In the Cl₂/O₂/Ar plasma, the non-monotonic Mo etching rate is probably due to the change in reaction probability.     

Controlled radical emulsion polymerization of polystyrene

In this paper, a new water-soluble initiator system, 2-bromopropane/CuSO₄/sodium ascorbate, was used as the initiator for emulsion polymerization. Radical emulsion polymerization of styrene was successfully carried out at 80 °C by using sodium dodecylbenzenesulfonate as the emulsifier. The 2-bromopropane/CuSO₄/sodium ascorbate-initiated emulsion polymerization shows the controlled free-radical polymerization features with linear growth of molecular weight. Polystyrene with a relatively high molecular weight and a narrow molecular weight distribution can be synthesized by this method. On the other hand, stable polystyrene latex can be obtained, and the size of the polystyrene latex increased with the increase in monomer conversion.     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.     

埃罗替尼的合成

以N,N-二甲基甲酰胺和硫酸二甲酯反应生成的亚胺盐与3-乙炔基苯胺进行亲核反应及甲醇的消去,获得了制备埃罗替尼所需的重要中间体N’-(3-乙炔基苯基)-N,N-二甲基甲脒,收率为75.8%。再以此中间体与2-氨基-4,5-二(2-甲氧基乙氧基)苯甲腈通过Dimroth重排反应方便地制得了抗肿瘤药物埃罗替尼,总收率(以3-乙炔基苯胺计)为56.5%。与以往合成埃罗替尼的方法相比,该方法更经济、更绿色。     

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C–N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.     

Polarization-controlled leakage current and photovoltaic effect in highly preferentially oriented BiFeO3 film

Highly preferentially oriented polycrystalline BiFeO₃ thin film was grown on FTO/glass substrate by a sol–gel method annealed at 500 °C. XRD result showed that the film adopts highly (100) preferential orientation. SEM results indicate that the film is composed of large grains of 40–200 nm and the thickness is about 320 nm. Room temperature saturated polarization and large Pr ~55 μC/cm² were obtained. Leakage current was substantially reduced by the controlling of ferroelectric polarization. Polarization-modulated conduction mechanism was studied. Moreover, substantial photovoltaic effect was observed.     

Synthesis of amine-modified mesoporous materials for CO2 capture by a one-pot template-free method

A one-pot template-free route was developed for the synthesis of novel tetraethylenepentamine modified porous silica as CO₂ adsorbents, the obtained materials were characterized by N₂ adsorption/desorption, thermogravimetry, elemental analysis, Fourier transform infrared spectrometry,scanning electron microscopy and transmission electron microscopy. It was found that the amine species were inserted into the silica skeleton, which considerably enhanced their dispersion. Compared with similar materials derived from impregnation, the porous structure of the silica can be better reserved, leading to a promising CO₂ adsorption capacity of 3.98 mmol CO₂/g-adsorbent and a fast adsorption kinetic in simulated flue gas at 348 K. The resulted adsorbents could also be easily regenerated and showed a good durability in multiple adsorption–desorption cycles. All these features make this method a promising option for the preparation of CO₂ adsorbents.     

A p‐Quinodimethane‐Bridged Porphyrin Dimer

A p‐quinodimethane (p‐QDM)‐bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross‐conjugated keto‐linked porphyrin dimers 8 a and 8 b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel–Crafts alkylation of the diol‐linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one‐photon absorption (OPA, λ_max=955 nm, ε=45400 M ^?1 cm^?1) and a large two‐photon absorption (TPA) cross‐section (σ⁽²⁾_max=2080 GM at 1800 nm) in the near‐infrared (NIR) region due to its extended π‐conjugation and quinoidal character. It also exhibits a short singlet excited‐state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground‐state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto‐linked dimer 8 b . This research has revealed that incorporation of a p‐QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.     

Instant Visual Detection of Picogram Levels of Trinitrotoluene by Using Luminescent Metal–Organic Framework Gel‐Coated Filter Paper

There is an ongoing need for explosive detection strategies to uncover threats to human security including illegal transport and terrorist activities. The widespread military use of the explosive trinitrotoluene (TNT) for landmines poses another particular threat to human health in the form of contamination of the surrounding environment and groundwater. The detection of explosives, particularly at low picogram levels, by using a molecular sensor is seen as an important challenge. Herein, we report on the use of a fluorescent metal–organic framework hydrogel that exhibits a higher detection capability for TNT in the gel state compared with that in the solution state. A portable sensor prepared from filter paper coated by the hydrogel was able to detect TNT at the picogram level with a detection limit of 1.82 ppt (parts per trillon). Our results present a simple and new means to provide selective detection of TNT on a surface or in aqueous solution, as afforded by the unique molecular packing through the metal–organic framework structure in the gel formation and the associated photophysical properties. Furthermore, the rheological properties of the MOF‐based gel were similar to those of a typical hydrogel.