Measurement of the enthalpy of phase transition for iron chevrel phase sulphide in the temperature range from 300 to 500 K

Enthalpy increment H_T-H_289K measurements have been made on iron Chevrel phase sulphide Fe₂Mo₆S_7.8, in the temperature range 300 to 500 K by the drop method using a hightemperature Calvet-type twin calorimeter. The first-order phase transition of this sulphide from a triclinic (low-temperature phase) to a rhombohedral (high-temperature phase) occurred at 375 K, and the enthalpy was evaluated to be 6.0 kJ/mol. The heat capacities of iron Chevrel phase sulphide Fe₂Mo₆S_7.8 were also calculated before and after the phase transition.

---

Zusammenfassung Nach der Tropfenmethode wurden mittels eines Hochtemperaturdoppelkalorimeters vom Typ Calvet im Temperaturbereich 300–500 K an Fe₂Mo₆S_7.8Messungen der Enthalpieinkremente H_T-H_298K durchgeführt. Die Phasenumwandlung erster Ordnung bei diesem Sulfid von der triklinen (Niedertemperaturphase) in die rhomboedrische (Hoch-temperaturphase) erfolgt bei 375 K und die Enthalpie erhielt man mit einem Wert von 6.0 kJ/mol. Die Wärmekapazitäten für Fe₂Mo₆S_7.8 wurden sowohl vor als auch nach der Phasenumwandlung berechnet.

     

A study of Feynman integrals by micro-differential equations

We use the holonomic character of Feynman integrals to describe their singularity structure explicitly in some simple cases. The results in §1 show that under moderate conditions Feynman amplitudes can be locally expressed essentially in terms of Legendre functions near the points where two positive- Landau-Nakanishi surfaces meet. Related topics such as hierarchical principle in perturbation theory are also discussed in terms of holonomic systems involved. In §4 we use the concrete expressions for Feynman amplitudes obtained in §1 to discuss the validity of Sato's conjecture.Supported in part by NSF MCS 75-2333Supported in part by NSF GP 36269     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

Triethylborane-mediated hydrogallation and hydroindation: novel access to organogalliums and organoindiums

Hydrogallation of carbon[bond]carbon multiple bonds proceeds in the presence of triethylborane as a radical initiator. Several functionalities do not interfere with this reaction. Resulting alkenyl- and alkylgallium species can be trapped by several electrophiles. Highly regioselective radical addition of an indium hydride reagent to alkynes is also achieved. Various functionalities are tolerant under the reaction conditions. The reaction proceeds with complete anti stereoselectivity. Alkenylindiums obtained via hydroindation can be employed for the following cross-coupling reaction with aryl halides in one pot.     

Speciation of arsenic(III) and arsenic(V) by inductively coupled plasma-atomic emission spectrometry coupled with preconcentration system

A novel and simple flow-based method was developed for the simultaneous determination of As(III) and As(V) in freshwater samples. Two miniature columns with a solid phase anion exchange resin, placed on two 6-way valves were utilized for the solid-phase collection/concentration of arsenic(III) and arsenic(V), respectively. As(III) could be retained on the column after its oxidation to As(V) species with an oxidizing agent. The collected analytes were then sequentially eluted by 2 M nitric acid and introduced into ICP-AES. Potassium permanganate was examined as potential oxidizing agent for conversion of As(III) to As(V). The standard deviation of the analytical signals (peak height) for the replicate analysis (n = 5) of 0.5 μg l⁻¹ solution were 3 and 5% for As(III) and As(V), respectively. The limit of detection (3σ) for both As(III) and As(V) were 0.1 μg l⁻¹. The proposed system produced satisfactory results on the application to the direct analysis of inorganic arsenic species in freshwater samples.     

Heat of immersion of iron(III) oxides in water at 25°C

The heat of immersion in water was measured at 25°C for three iron(III) oxides using a twin-type microcalorimeter. One of the samples was commercial α-Fe₂O₃ (sample C) and the other two (samples M and F) were prepared by calcining magnetite and iron(III) hydroxide in air at various temperatures, T_p, from 300 to 700°C. The samples were evacuated at outgassing temperature, T_o, between room temperature and 500°C at a pressure of 1 × 10^?2?2.7 × 10^?2N m^?2 for 6 h. The heat of immersion, h_i(J m^?2), of samples C and M increased with an increase in T_o and showed the maximum h_i at T_o =400°C, while sample F did not show the maximum up to T_o =500°C. The systematic correlation was not observed between h_i and T_p of sample F. The heat of reproduction of the surface hydroxyl group on sample F was approximately estimated as 6.6 × 10⁴ J mole^?1 H₂O.     

Stabilities in field electron emissions from noble‐metal covered W nano‐tips: apex structure dependence

We observed field emission microscopy (FEM) patterns of noble‐metal (NM) covered W nano‐tips with three different apex structures fabricated by field evaporation. Each of the three tips was terminated with a single atom, three atoms or ten atoms. We investigated the temporal changes in the FEM of these tips to discuss the stabilities in the spatial distributions of the field emission (FE) beams. The single‐atom tip showed two characteristics that were superior to the others. First, the beams emitted from the single‐atom tip were the most collimated among the three tips (the semi‐cone angle of 1.0° , FWHM). Second, adsorption of residual gas had little influence on FE from the single‐atom tip, while the other tips were easily contaminated even at ultra high vacuum, resulting in the emission fluctuation. Copyright © 2006 John Wiley & Sons, Ltd.     

Extraction of Catecholamines by Calixarene Carboxylic Acid Derivatives

Extraction behaviors of catecholamines with a series of calixarene carboxylic acid derivatives were investigated. Relatively large calix[6]arene and calix[8]arene extract catecholamines into the organic solution, while smaller calix[4]arene and the monomer analog do not. The calix[6]arene, which has a cavity that fits a protonated amino group well, selectively extracts a primary amino compound dopamine over other catecholamines. Slope analysis and Job’s method confirmed formation of a 1:1 complex between the calix[6]arene and dopamine. On the other hand, the calix[8]arene extracts both dopamine and adrenaline, due to the large cavity for induced-fit recognition. Dopamine extracted with the calixarene is quantitatively stripped by contacting the organic solution with a fresh acidic solution.     

Palladium(0)-catalyzed stereoselective cyclization of allenenes: divergent synthesis of pyrrolidines and 3-azabicyclo[3.1.0]hexanes from single allenenes

Two novel palladium(0)-catalyzed cyclizations of allenenes are described. Treatment of allenenes such as N-(1-alkyl-2,3-butadienyl)-N-allylsulfonamide with an aryl halide and K(2)CO(3) in the presence of a catalytic amount of Pd(PPh(3))(4) in dioxane affords 2,3-cis-pyrrolidines in a stereoselective manner. In sharp contrast, cyclization of the same allenenes using catalytic Pd(2)(dba)(3) x CHCl(3) in the presence of allyl methyl carbonate in CH(3)CN leads to stereoselective formation of a 3-azabicyclo[3.1.0]hexane framework in moderate yields.     

Extraction Behavior of Amino Acids by Calix[6]arene Carboxylic Acid Derivatives

A series of calixarene carboxylic acid derivatives were synthesized for the extraction of amino acids. A calix[6]arene carboxylic acid derivative showed the highest extractability to the target tryptophan ester. The main driving forcefor the complexation was the interaction between the ammonium cation of the aminoacid and the oxygen atoms of the host molecule. Stripping of amino acids was alsoaccomplished by contacting the organic solution with a fresh acidic solution. Basedon slope and Job method analyses, it was confirmed that the calix[6]arene formsa 1 : 1 complex with the amino acid ester. The structure of the complex between the calix[6]arene and the amino acid was investigated by ¹H-NMR and CD spectra. The calix[6]arene includes a guest molecule in the cavity, and the inclusion induces the asymmetrization of the host molecule. This host compound functions as a novel recognition tool for amino acids.