Synthesis of well‐designed polymers carrying saccharide moieties via RAFT miniemulsion polymerization

Two hydrophobic vinyl saccharide monomers based on D ‐glucose and D ‐fructose were polymerized by employing the reversible addition‐fragmentation transfer (RAFT) miniemulsion polymerization technique to prepare well‐designed glycopolymers. Three dithiobenzoate‐RAFT agents [S?C(Ph)S? R], 1‐phenylethyl dithiobenzoate (PED), 2‐phenylprop‐2‐yl dithiobenzoate (PPD), and 2‐cyanoprop‐2‐yl dithiobenzoate (CPD), were used to control the growth of polymer chains. The best results were obtained in the presence of the PPD‐RAFT agent and the formed polymers have polydispersity index's (PDI) lower than 1.15. Under adequate miniemulsion polymerization conditions, a glycopolymer with PDI of 1.1 and molecular weight of 5 × 10⁴ g/mol has been successfully synthesized in a short reaction time of 100 min. Furthermore, some block copolymers containing saccharide segment with butyl or methyl methacrylate were prepared. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical study of 3d‐metal mononitrides using DFT method

3d‐Metal mononitrides are studied using the density functional theory method. The lowest spin state for these dimers is obtained using the B3LYP hybrid functional with the 6‐311+G* basis set. The equilibrium geometries, vibrational frequencies, binding energies, Mulliken, and natural orbital population analysis charges, natural orbital electronic configuration, electron affinity, and ionization potential are obtained. Mulliken as well as natural orbital population analysis charges indicate that for all dimers, in cations most of the positive charge localized on the transition metal atom where in anions most of the negative charge localized on nitrogen atom. The binding energies for 3d‐metal mononitrides are higher than those for monocarbides and monoxides. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

Theoretical study of the electronic spectrum of binuclear gold(I) complexes

The electronic structure and the spectroscopic properties of [Au₂(CS₃)₂]^?2, [Au₂(pym‐2‐S)₂] (pym = pyrimidethiolate), [Au₂(dpm)₂]⁺² (dpm = bis(diphosphino)methane) were studied using density functional theory (DFT) at the B3LYP level. The absorption spectrum of these binuclear gold(I) complexes was calculated by single excitation time‐dependent (TD) method. All complexes showed a ¹(5dσ* → 6pσ) transition associated with a metal–metal charge transfer, which is strongly interrelated with the gold–gold distance. Furthermore, we have calculated the frequency of the gold–gold vibration (ν_Au2) on the above complexes. The values obtained are theoretically in agreement with experimental range. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Four Novel Eremophilanolides from Ligularia sagitta

Four new eremophilanolides, isolated from Ligularia sagitta, were identified as (1β,3β,6β,8β,10β)‐6‐acetoxy‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 1 ), (1β,3β,6β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐6,8‐dihydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 2 ), (1β,3β,6β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐ethoxy‐6‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 3 ), and (1β,3β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 4 ). Their structures were elucidated by spectroscopic methods, including 2D‐NMR techniques and chemical transformations.     

A Density Functional Theory Study on Electronic Structure and Second—order Nonlinear Optical Properties of Some Push—Pull Molecules

Time-dependent density-functional theory(TDDFT)has been applied to calculate the electronic structure and second-order nonlinear optical(NLO) properties of some organic molecules.The two-dimensional(2-D)charge transfer charateristics of calculated molecules were studied and compared with corresponding experimental results.All the theoretical results agree well with the measurement.For 2-D molecule with two-fold symmetry,the dominant charge transfer is off-diagonal,while for three-fold symmetry 2-D molecule,the dominant charge transfer is not only between branches and central group but also among branches.     

Analysis of organic acids and inorganic anions in beverage drinks by capillary electrophoresis

To meet the need for a new and validated analytical method for simultaneous determination of inorganic and organic acid anions in beverage drinks, a capillary zone electrophoresis (CZE) procedure had been developed based on a new background electrolyte (BGE) system containing 3 mmol/L 1,3,5-benzenetricarboxylic acid (BTA), 15 mmol/L tris(hydroxymethyl)aminomethane and 1.5 mmol/L tetraethylenepentamine (TEPA) at pH 8.4. Baseline separation of anions commonly found in beverage drinks could be achieved in less than 14 min with indirect UV detection at 240 nm. Comigration problems for hydroxycarboxylic acids could be solved using TEPA as BGE additive. The results indicate excellent repeatability for migration time (RSD, 0.27-0.67%, n = 5) and good precision for both peak height (RSD, 3.2-4.2%, n = 5) and peak area (RSD, 3.1-4.5%, n = 5). Under the optimized conditions and using corrected peak area for quantitation, an excellent linear dynamic range (with correlation coefficient > 0.997 in a concentration range from 0.005 to 2.0 mmol/L) and low detection limit (1-4 micro mol/L) were obtained for all the anions investigated. The applicability and reliability of the CE procedure developed were established by parallel method determination using established ion chromatography procedure for the analysis of inorganic and organic acid anions in orange juice and wine samples. Our CZE procedure provided a sensitive and economic technique for simultaneous determination of inorganic and organic acid anions in orange juice, red and white wine samples.     

[{Cu(phen)2}(μ‐malato){Cu(phen)(NO3)}](NO3)·4H2O: malate acting as a tetra­dentate and dibridging ligand in a dinuclear copper complex

The crystal structure of the title compound, μ‐2‐hydroxy­butane­dioato‐1κ²O⁴,O^4′:2κ³O¹,O²,O⁴‐nitrato‐2κO‐tris­(1,10‐phen­anthroline)‐1κ⁴N,N′;2κ²N,N′‐dicopper(II) nitrate tetra­hydrate, [Cu₂(C₄H₃O₅)(NO₃)(C₁₂H₈N₂)₃](NO₃)·4H₂O, contains an unsymmetrical dinuclear copper complex with Cu(phen)₂ and Cu(phen)(NO₃) moieties (phen is 1,10‐phenanthroline) bridged by a malate (2‐hydroxy­butane­dioate) ligand, which acts as a double‐bridging and tetra­dentate ligand. As a result of this double‐bridging action, especially the direct coordination of the O atom of one carboxyl­ate group of malate to the two Cu atoms, the Cu⋯Cu distance is only 4.199 (1) Å and the two phen planes are roughly parallel [the shortest inter­planar distance is 3.28 (1) Å], exhibiting an obvious intra­molecular π–π stacking inter­action.     

catena‐Poly[[tetra­aqua­manganese(II)]‐μ‐4‐(carboxyl­ato­methyl­sulfanyl)­phenoxy­acetato]

The title compound, [Mn(C₁₀H₈O₅S)(H₂O)₄]_n, a one‐dimensional manganese(II) complex comprising helical chains bridged by 4‐(carboxylatomethylsulfanyl)phenoxyacetate ligands has been characterized by single‐crystal X‐ray diffraction analysis. Hydrogen‐bonding inter­actions between adjacent chains extend the complex into a three‐dimensional supra­molecular architecture.     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.