红外探测器高性能读出电路的研究

设计了一种高性能电容反馈跨阻放大器(CTIA)与相关双采样电路(CDS)相结合的红外探测器读出电路。该电路采用CTIA电路实现对微弱电流信号的高精度读出,并通过CDS电路抑制CTIA引入的固定模式噪声(FPN),最后采用失调校正技术减小CDS引入的失调,从而减小了噪声对电路的影响,提高了读出电路的精度。采用特许半导体(Chartered)0.35μm标准CMOS工艺对电路进行流片,测试结果表明:在20pA～10nA范围内该电路功能良好,读出精度可达10bit以上,线性度达97%,达到了设计要求。该读出电路可用于长线列及面阵结构红外探测系统。     

Palladium-catalyzed chemoselective direct α-arylation of carbonyl compounds with chloroaryl triflates at the C–Cl site

This study described palladium-catalyzed chemoselective direct α-arylation of carbonyl compounds with chloroaryl triflates in the Ar–Cl bond. The Pd/SelectPhos system showed excellent chemoselectivity toward the Ar–Cl bond in the presence of the Ar–OTf bond with a broad substrate scope and excellent product yields. The electronic and steric hindrance offered by the –PR₂ group of the ligand with the C2-alkyl group was found to be the key factor affecting the reactivity and chemoselectivity of the α-arylation reaction. The chemodivergent approach was also successfully employed in the synthesis of flurbiprofen and its derivatives (e.g., –OMe and –F).

Palladium-catalyzed chemoselective direct α-arylation of carbonyl compounds with chloroaryl triflates in the Ar–Cl bond is reported. The effects of –PR₂ and C2-alkyl groups of the ligands are investigated using experimental and computational methods.     

Responses of Issatchenkia terricola WJL-G4 upon Citric Acid Stress

This study aimed to elucidate the responses of a novel characterized Issatchenkia terricola WJL-G4 against citric acid stress by performing physiological analysis, morphology observation, and structural and membrane fatty acid composition analysis. The results showed that under citric acid stress, the cell vitality of I. terricola WJL-G4 was reduced. The cell morphology changed with the unclear, uncompleted and thinner cell wall, and degraded the cell structure. When the citric acid concentration was 20 g/L, I. terricola WJL-G4 could tolerate citric acid and maintain the cell structure by increasing the intracellular pH, superoxide dismutase activity, and contents of unsaturated fatty acids. As the citric acid concentration was ≥80 g/L, the stress has exceeded the cellular anti-stress ability, causing substantial cell damage. The cell membrane permeability, the content of membrane lipids, malondialdehyde and superoxide anion increased, but the intracellular pH and superoxide dismutase activities decreased, accompanying the increase of citric acid concentrations. The findings of this work provided a theoretical basis for the responsive mechanism of I. terricola WJL-G4 under high concentrations of citric acid, and can serve as a reference for biological acid reduction in fruit processing.     

声光栅正弦结构光投射器的光学系统设计

针对一种新型的声光波干涉测量技术,对声光栅正弦结构光投射器的三维测量工作原理进行了系统的分析,讨论了影响投射器光学系统结构的因素和影响接收屏上的光照度的因素,并进行了光学系统设计。在优化设计过程中,采用了限制光线最大入射角的方法,达到控制投射系统的球差和保证接收屏上照明均匀的要求。所设计的声光栅正弦光投射器具有很好的成像质量。应用该系统对在500mm处的石膏像上投射干涉条纹,可以得到能量比较均匀、变形量很小的干涉条纹图,利用该条纹图和相关的算法可以对具有复杂几何形状的物体进行有效的三维测量。     

鲜红斑痣光动力治疗数学模型及临床验证

为了研究光动力治疗(PDT)中各个因素作用的规律,帮助临床采取有效的治疗方案,针对鲜红斑痣(PWS)组织特性,将光动力治疗中组织光分布、单线态氧产生、光敏剂漂白过程和光敏剂扩散过程结合起来,建立适合于光动力治疗鲜红斑痣病变的系统模型。利用建立的模型,对临床中出现的第二光斑治疗效果差的问题进行仿真研究,发现影响其治疗效果的因素,并通过仿真实验提出改进其治疗效果的新方案。通过临床实验,证明了新方案的有效性和模型的有效性。研究结果说明,针对特定的病例条件建立仿真模型,通过仿真实验可以为临床和理论研究提供一种有效的分析方法。     

DFT Investigations of Aun Nano-Clusters Supported on TiO2 Nanotubes: Structures and Electronic Properties

TiO₂ nanotubes (TiO₂NTs) are beneficial for photogenerated electron separation in photocatalysis. In order to improve the utilization rate of TiO₂NTs in the visible light region, an effective method is to use Au_n cluster deposition-modified TiO₂NTs. It is of great significance to investigate the mechanism of Au_n clusters supported on TiO₂NTs to strengthen its visible-light response. In this work, the structures, electronic properties, Mulliken atomic charge, density of states, band structure, and deformation density of Au_n (n = 1, 8, 13) clusters supported on TiO₂NTs were investigated by DMOL3. Based on published research results, the most stable adsorption configurations of Au_n (n = 1, 8, 13) clusters supported with TiO₂NTs were obtained. The adsorption energy increased as the number of Au adatoms increased linearly. The Au_n clusters supported on TiO₂NTs carry a negative charge. The band gaps of the three most stable structures of each adsorption system decreased compared to TiO₂NTs; the valence top and the conduction bottom of the Fermi level come mainly from the contribution of 5d and 6s-Au. The electronic properties of the 5d and 6s impurity orbitals cause valence widening and band gap narrowing.     

Surface anchoring energy and the first order Fréedericksz transition of a NLC cell

Many authors have suggested new forms to describe the surface anchoring energy of the liquid crystal-wall interface, replacing the Rapini-Papoular (RP) formula g s = (1/2) A sin2 theta. If the RP function is considered as the primary approximation, and a lowest order modification is included, then the surface anchoring energy can be represented by g s = (1/2) A sin2 theta(1 + zeta sin2 theta). zeta characterizes the modification to the RP formula and varies for the different energy forms. It is well known that the RP formula predicts a second order Freedericksz transition. This paper points out that the transition can be first order if the modification is taken into account, in which case at the threshold point the tilt angle of the director at the middle layer of the cell, thetam, is finite. The conditions for the existence of the first order transition are obtained; zeta < 0 is required for a first order transition. The approximate expression of the threshold field is also given.     

A rapid and selective HPLC‐UV method for the quantitation of efavirenz in plasma from patients on concurrent HIV/AIDS and tuberculosis treatments

Owing to heterogeneity in therapeutic response, efavirenz is of research and clinical interest. There is a need to quantitate it using noncostly and selective methods. A method for efavirenz quantitation in plasma containing HIV and tuberculosis drugs was developed. Chromatographic separation was carried out using a C₁₈ column. The mobile phase consisted of 0.1% formic acid and acetonitrile, and was pumped at a flow rate of 0.3 mL/min. Efavirenz and ritonavir (internal standard) were monitored at 247 nm. Plasma proteins were precipitated by centrifugation. The analysis time was 6 min. The response was linear (r = 0.9997). The accuracy ranged between 98 and 115% (intraday) and between 99 and 117% (interday). The precision ranged from 1.670 to 4.087% (intraday) and from 3.447 to 13.347% (interday). Recovery ranged from 98 to 132%. Stability ranged between 99 and 123%. The selectivity was proven by analysis of drugs used for the management of HIV/AIDS and tuberculosis. Plasma sample analysis showed an efavirenz retention time of 5.57 min and a peak plasma concentration of 2.4 µg/mL occurring at 2 h. This method is rapid and selective, and thus suitable for monitoring efavirenz in patients with HIV/AIDS alone or co‐infected with tuberculosis in a less resourced setting. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous determination of morniflumate and its major active metabolite,niflumic acid,in human plasma by high‐performance liquid chromatography in stability and pharmacokinetic studies

A rapid, sensitive and stable high‐performance liquid chromatography (HPLC) method was developed and validated for the simultaneous determination of morniflumate and its major active metabolite, niflumic acid, in human plasma. HPLC analysis was carried out using a 5 µm particle size, C₁₈‐bonded silica column with a mixture of acetonitrile and 0.005 m potassium phosphate monobasic in water (60:40, v/v) as the mobile phase and UV detection at 287 nm. The method involved the treatment with 50 μL of 0.4 m hydrochloric acid for the stability of morniflumate, extraction with diethylether and evaporation to dryness under a nitrogen stream. The lower limit of quantitation for morniflumate and niflumic acid was 50 and 500 ng/mL, respectively. The calibration curves for morniflumate and niflumic acid were linear over the concentration range of 50–20,000 ng/mL and 500–50,000 ng/mL, respectively, with correlation coefficients greater than 0.9995 and inter‐ or intra‐batch coefficients of variation not exceeding 13.79%. The variability (percentage difference) of incurred sample re‐analysis did not exceed 11.72% and all of the repeat samples fell within 20% of the mean value. This assay procedure was applied successfully to an examination of the pharmacokinetics of morniflumate and its metabolite, niflumic acid, in human subjects. Copyright © 2013 John Wiley & Sons, Ltd.     

A Shortcut Application of a Flory‐Like Model to Asphaltene Precipitation

A model, previously developed to determine the asphaltene precipitation onset, considered that asphaltene separation is ruled by the solvent quality of the surrounding media. Here, it is shown that it is equivalent to Flory‐Huggins model, when it is hypothesized that the asphaltene concentration is always in the instability range. With this, the controversy on the use of a concentration‐dependent model to describe a phenomenon that is practically independent of concentration is by‐passed. Moreover, improvements of the model are presented, together with sensitivity analysis with respect to its parameters. Two field case applications are reported, showing that the model gives a reasonable fit.