Optical bistability in reflective fiber gratings

Optical bistability in a nonlinearly reflective fiber grating through the mode coupling between the LP₀₁ and counter propagation LP₀₂ modes (i,e., the reflective LP₀₁&rlhar2;LP₀₂ mode converter) is investigated by using the coupled-mode theory. Both the transmissive and the reflective properties of this nonlinear device are analyzed, which show that the output-versus-input relation exhibits the optical bistability. The switching power and the bistable hysteresis performances are also discussed. In addition, the comparison between the nonlinearly reflective mode converter (LP₀₁&rlhar2;LP₀₂) and the nonlinear fiber Bragg grating reflector (i,e., the LP₀₁ and counter-propagation LP₀₁ modes) is also presented. It is shown that the former has much lower switching power than the latter     

Theory and design of a tapered line distributed photodetector

We present the theory and design of a tapered line distributed photodetector (TLDP). In the previously demonstrated velocity-matched distributed photodetector (VMDP), high electrical bandwidth is achieved by proper termination in the input end to absorb reverse traveling waves, sacrificing one-half of the quantum efficiency. By utilizing the tapered line structure and phase matching between optical waves and microwaves in our analyzed structure, a traveling-wave photodetector is more realizable and ultrahigh bandwidth can be attained due to removal of the extra input dummy load that sacrifices one-half of the total quantum efficiency. To investigate the advantages of TLDP over VMDP, we calculate their electrical bandwidth performances by using an analytic photodistributed current model. We adopted low-temperature-grown (LTG) GaAs-based metal-semiconductor-metal (MSM) traveling-wave photodetectors as example unit active devices in the analytic bandwidth calculation for their high-speed and high-power performances. Both VMDP and TLDP in our simulation are assumed to be transferred onto glass substrates, which would achieve high microwave velocity/impedance and make radiation loss negligible. The simulated bandwidth of a properly designed LTG GaAs MSM TLDP is /spl sim/325 GHz, which is higher than the simulated bandwidth of the LTG GaAs MSM VMDP with an open-circuit input end (/spl sim/240 GHz) and is almost comparable to the simulated bandwidth of an input-terminated LTG GaAs MSM VMDP (/spl sim/330 GHz). This proposed method can be applied to the design of high-bandwidth distributed photodetectors for radio-frequency photonic systems and optoelectronic generation of high-power microwaves and millimeter waves.     

基于规则的光学邻近矫正中规则的相关处理

讨论了如何选择适当的规则,如何建立简洁实用的规则库,如何应用规则库.提出了四种主要的光学邻近矫正规则,在实验结果中列举了规则库中的部分数据.利用规则矫正后的版图光刻得到的硅片图形有了明显的改善.规则库的自动建立部分 (OPCL)是基于规则的光学邻近矫正系统的重要组成部分.     

Spectral line suppression and sideband narrowing via quantum interference

We reveal that for a realistic system, interference effects are obtained such as the suppression of central line and inner sidebands and the narrowing of the outer fluorescence sidebands. For this purpose, we consider a spontaneous decay from an excited state to a metastable state when the excited and metastable states are resonantly coupled to an auxiliary metastable state by a laser field and a microwave field, respectively. The fluorescence spectrum evolves from a five-peaked structure into a doublet of ultrasharp lines as the ratio of the laser field Rabi frequency to the microwave Rabi frequency is decreased. The physical origin is presented in terms of dressed states.     

ZnSe及ZnSe/GaAs异质结构中压力导致的直接禁带向间接禁带的转变

用经验赝势方法计算了体ZnSe以及ZnSe/GaAs单异质结系统中ZnSe外延层г、X、L等特殊对称点导带底能量随压力的变化。结果表明，同Si、Ge、GaAs等半导体材料不同，ZnSe的X点导带底具有正的压力系数，但比г点的压力系数小，这是ZnSe材料以及ZnSe基异质结构材料发生直接禁带向间接禁带的转变时所需转变压力较大的根本原因。研究了ZnSe/GaAs异质结构中晶格失配造成的应变对外延层г、X、L对称点压力系数的影响，表明这种晶格失配造成的应变可以极大地减小ZnSe外延层材料由直接禁带向间接禁带的转变压力。     

The Iyengar Type Inequalities with Exact Estimations and the Chebyshev Central Algorithms of Integrals

In this paper, both low order and high order extensions of the Iyengar type inequality are obtained. Such extensions are the best possible in the same sense as that of the Iyengar inequality. hzrthermore, the Chebyshev central algorithms of integrals for some function classes and some related problems are also considered and investigated.     

Solid-state Electrochemistry of Gadolinium Hexacyanoferrate Modified Electrode and Electrocatalytic Properties of Gadolinium Hexacyanoferrate

A new electroactive polynuclear inorganic compound of rare earth metal, gadolinium hexacyanoferrate (GdHCF), was prepared and characterized using the techniques of FTIR spectroscopy, thermogravimetric analysis (TG), UV-Vis spectrometry, X-ray photoelectron spectroscopy (XPS), ICP atomic emission spectroscopy, and EDX. The results of ICP atomic emission spectroscopy, EDX, and TGA indicated that the prepared GdHCF sample had a stoichiometry of NaGdFe(CN)₆·12H₂O (when GdHCF was prepared in NaCl solution). The FTIR spectrum of GdHCF showed that there were two types of water molecules in the structure of GdHCF: one was the interstitial water (5 H₂O), which resulted from the association of water due to H-bonding, and the other was water coordinated with Gd (7 H₂O). The results obtained using XPS showed that the oxidation state of Fe and Gd in the GdHCF sample was +2 and +3, respectively. GdHCF was immobilized on the surface of spectroscopically pure graphite (SG) electrode forming the GdHCF/SG electrode, and the solid-state electrochemistry of the resultant electrode was studied using cyclic voltammetry. The cyclic voltammetric results indicated that the GdHCF/SG electrode exhibited a pair of well-defined and stable redox peaks with the formal potential of E^0′=(197±3) mV. The effects of the concentration of the supporting electrolyte on the electrochemical characteristics of GdHCF were studied, and the results showed that the value of E^0′ increased linearly with the activity of the cationic ion of the supporting electrolyte (lga_Na⁺), with a slope of 54.1 mV, which may become a novel method for determining the activity of Na⁺ in solution. Further experimental results indicated that GdHCF had electrocatalytic activities toward the oxidation of dopamine (DA) and ascorbic acid (AA), and the electrocatalytic current increased linearly with the concentration of DA (or AA) in the range of 1.0–10.0 mmol·L^?1 (for DA) or 0.5–20.0 mmol·L^?1 (for AA).     

Asymmetric Regulation System Fit for Chinese Telecom Market

After the new round of restructuring of Chinese telecom sector,it's pressing to formulate and implement asymmetric regulation policies so as to shape an effectively competitive market structure in a relatively short term.This paper reviewed the asymmetric regulation policies and practices carried out in foreign telecom market,and then according to the specific situations of Chinese telecom market,proposed the principles and corresponding policies for establishing an asymmetric regulation system fit for Chin...     

Investigation of Mechanical and Electrical Characteristics for Cracked Conductive Particle in Anisotropic Conductive Adhesive (ACA) Assembly

In an anisotropic conductive adhesive (ACA) assembly, the electrical conduction is usually achieved with the conductive particles between the bumps of integrated circuit (IC) and corresponding conductive tracks on the glass substrate. Fully understanding of the mechanical and electrical characteristics of ACA particles can help to optimize the assembly process and improve the reliability of ACA interconnection. Most conductive particles used in the ACA assembly are with cracks in the metal coating of the particles after the ACA bonding. This paper introduced the fracture analysis by applying the cohesive elements in the numerical model of the nickel-coated polymer particle and further simulating the cracks initiation and propagation in the nickel coating during the ACA bonding. The simulation results showed that the stress distribution on the nickel-coated particle with cracks was significantly different from that on the nickel-coated particle without crack, indicating that the stress analysis by taking the crack into consideration is very important for the reliability assessment of the ACA interconnection. The stress analysis of cohesive elements indicated that the cracks initiated at the central area of the nickel coating and propagated to the polar area. Furthermore, by the introduction of a new parameter of the virtual resistance, a mathematical model was established to describe the electrical characteristics of the nickel-coated particle with cracks. The particle resistance of the nickel-coated particle with cracks was found to be much higher than that of the particle without crack in the optimized bonding pressure range, indicating that it is necessary to take the crack into consideration for the particle conduction analysis as well. Therefore, the fracture analysis on the conductive particle by taking the crack into consideration could accurately evaluate the reliability of ACA interconnection and avoid serious reliability issues.     

大口径光束波前采样器(孔栅)的研制

应用平面波角谱理论，分析了采样器对光波场采样和分光的基本原理以及对空间采样频率的选择规则，描述了实际研制的大口径采样器的结构设计，并通过数值方法和高能激光大气传输实验研究了高能激光经采样器前／后的远场光斑分布关系。结果表明：利用光束波前采样器能高保真地实现对高能激光束的分光。