负载稀土型酸活化膨润土的酯化催化活性

负载稀土型酸活化膨润土的酯化催化活性李永绣，冯天泽，胡平贵，何小彬，辜子英，廖荣辉（南昌大学化学系南昌３３００４７）关键词稀土，膨润土，催化酯化可用稀土、膨润土单独作酯化催化剂，但活性不高［１～３］。本文将稀土用离子交换的方法负载到酸活化膨润土中，寻...     

Chemistry of O-Benzoquinones and Masked O-Benzoquinones I. Diels-Alder Reactions of O-Benzoquinones with Dimethyl Acetylenedicarboxylate and Phenylacetylene

Diels-Alder reactions of six o-benzoquinones with dimethyl acetylenedicarboxylate has been examined. The yields of adducts vary with the natures of the o-benzoquinones, 3,4-Di-n-propyl-(1c), 3,6-di-n-propyl (1d). 3. 4-diallyl-(1e) and 3, 6-diallyl-o-benzoquinone (1f) are found to give bicyclic a-diketones exclusively without the formation of 1,4-dioxine derivatives, the yields ranging from 20 to 70%. In the case of 4, 5-dimethoxy-o-benzoquinone, dimethyl 4, 5-dimethoxyphthalate is produced in 42% yield, presumably derived from the decomposition of the corresponding initially formed α-diketone. 3, 6-Di-n-propyl-4, 5-dimethoxy-o-benzoquinone deteriorates without addition to dimethyl acetylenedicarboxylate upon heating. The additions of o-benzoquinones 1c , 1d and 1f to phenylacetylene are also studied. The yields of adducts, α-diketones, range from 23% to 82%.     

Alkanethiolate self-assembled monolayers as functional spacers to resist protein adsorption upon Au-coated nerve microelectrode

Alkanethiolate self-assembled monolayers (SAMs) of varied chain lengths were adsorbed upon Au-coated nerve microelectrodes and employed as protein-resistant spacers. The microelectrode spiraled as a cuff type can be used for restoring motor function via electrical stimulation on the peripheral nerve system; however, an increase of electrode impedance might occur during implantation. In this work, a thin-film SAMs treatment upon Au/polyimide (PI) surface of the microelectrode provided a hydrophobic characteristic, which retarded protein adsorption at the initial stage and subsequent pileup (or thickening) process. The protein-resistant effect exhibited comparable SAMs of different chain lengths adsorbed upon Au/PI surfaces. The increase of electrode impedance as a function of protein deposition time was mainly correlated with the addition of reactance that was associated with the pileup thickness of the deposited protein. Particularly, the SAMs-modified surface was capable to detach a significant portion of the accumulated protein from the protein-deposited SAMs/Au/PI, whereas the protein-deposited layers exhibited firm adhesion upon Au/PI surface. It is therefore very promising to apply thin-film SAMs adsorbed upon Au-coated surface for bioinvasive devices that have the need of functional electrical stimulations or sensing nerve signals during chronic implantation.     

From D-glucose to biologically potent L-hexose derivatives: synthesis of alpha-L-iduronidase fluorogenic detector and the disaccharide moieties of bleomycin A2 and heparan sulfate

A novel and convenient route for the synthesis of biologically potent and rare L-hexose derivatives from D-glucose is described. Conversion of diacetone-alpha-D-glucose (14) into 1,2:3,5-di-O-isopropylidene-beta-L-idofuranose (19) was efficiently carried out in two steps. Orthogonal isopropylidene rearrangement of compound 19 led to 1,2:5,6-di-O-isopropylidene-beta-L-idofuranose (27), which underwent regioselective epimerization at the C3 position to give the L-talo- and 3-functionalized L-idofuranosyl derivatives. Hydrolysis of compound 19 under acidic conditions furnished 1,6-anhydro-beta-L-idopyranose (35) in excellent yield, which was successfully transformed into the corresponding L-allo, L-altro, L-gulo, and L-ido derivatives via regioselective benzylation, benzoylation, triflation and nucleophilic substitution as the key steps. Applications of these 1,6-anhydro-beta-L-hexopyranoses as valuable building blocks to the syntheses of 4-methylcoumarin-7-yl-alpha-L-iduronic acid and the disaccharide moieties of bleomycin A(2) as well as heparan sulfate are highlighted.     

CuO／CeO2和CuO／Al2O3催化剂的催化性能

本文以ＣＯ氧化为模式反应考察了ＣｅＯ２和Ａｌ２Ｏ３负载氧化铜催化剂的氧化活性，运用ＸＲＤ和ＴＰＲ技术研究了催化剂的还原性能和物相结构，结果表明：载体性质对负载ＣｕＯ催化剂的ＣＯ氧化活性有很大影响，ＣｕＯ／ＣｅＯ２催化剂活性明显高于ＣｕＯ／Ａｌ２Ｏ３催化剂．催化剂的还原特性随载体不同而不同．同时发现，热处理对催化剂铜物种的存在形式，晶粒大小、还原特性及其催化活性有明显影响，ＣｕＯ／Ａｌ２Ｏ３催化剂活性下降的主要因素是生成了活性较低的ＣｕＡｌ２Ｏ４相，而ＣｕＯ／ＣｅＯ２催化剂活性下降是由于ＣｕＯ和ＣｅＯ２发生烧结，晶粒变大     

Titrimetric determination of thiocyanate and thiosulphate ions by oxidation with iodine in alkaline solution

Thiocyanate (2.7-90 mug) and thiosulphate (4.5-90 mug) ions are oxidized by iodine in alkaline media to sulphate ions. After acidification, the excess of iodine is extracted into chloroform, and the iodide ions formed in the redox reaction subjected to an amplification reaction. Either a titrimetric or a spectrophotometric finish may be used. Each thiocyanate and thiosulphate ion results in the ultimate production of 19 and 24 iodine molecules, respectively.     

膦化聚2,6—二甲基1,4—苯醚负载钯催化剂的表征及其催化性能

报道了四种不同P/Pd摩尔比的膦化聚2,6-二甲基1,4-苯醚负载把催化剂的加氢和异构化性能;通过XPS、电镜和远红外对催化剂进行了表征;并考察了溶剂和温度对催化剂活性的影响.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

Preparation and characterization O-lauroyl chitosan/poly (L-lactic acid) blend membranes by solution-casting approach

O-Lauroyl chitosan/poly(L-lactide) (OCS/PLLA) blend membranes with different compositions were prepared by solution-casting approach using chloroform as common solvent. The experimental results of FT-IR, DSC and WAXD indicated that inter-association hydrogen-bond interactions existed between OCS and PLLA in the blend membranes. And SEM observation confirmed that the blend membranes with suitable compositions were compatible.     

A simple route towards tubular ZnO

Thermal treatment of Zn(NH3)(4)2+ precursor in ethanol solvent led to the formation of the tubular ZnO which exhibited strong ultraviolet photoluminescence around 385 nm at room temperature; TEM images showed the hollow tubules with approximately 450 nm in diameter and approximately 4 microns in length were built up by ZnO polycrystals.