Synthesis and Properties of Oval‐Shaped Iron Oxide/Ethylene Glycol Mesostructured Nanosheets

We have demonstrated a new and facile bottom‐up protocol for the effective synthesis of oval‐shaped iron oxide/ethylene glycol (FeO_x/EG) mesostructured nanosheets. Deprotonated ethylene glycol molecules are intercalated into iron oxide layers to form an interlayer distance of 10.6 Å. These materials display some peculiar magnetic properties, such as the low Morin temperature T_M and ferromagnetism below this T_M value. CdSe/ZnS nanoparticles can be loaded onto these mesostructured nanosheets to produce nanocomposites that combine both magnetic and fluorescence functions. In addition, iron oxide/propanediol (or butanediol) mesostructured materials with increased interlayer distances can also be synthesized. The developed synthetic strategy may be extended toward the creation of other ultrathin mesostructured nanosheets.     

滑动弧电极放电等离子体作用甲烷制C2烃的工艺

采用刀片式不锈钢电极放电反应器,以Ar气为稀释气,研究了等离子体作用下甲烷转化制C2烃的工艺条件。考察了CH4流量、高频电源输入电压和电极间距等参数对甲烷转化率、C2烃选择性、收率和反应表观能耗的影响。结果表明,增加CH4流量,表观能耗随之降低;当输入电压和电极间距较小时,甲烷转化率随输入电压和电极间距的增大而增大,但输入电压和电极间距过大时,C2烃收率明显下降,积碳严重。在CH4流量14 mL/min、Ar气流量60 mL/min、高频电源输入电压22 V、电流0.44 A、电极间距4 mm的优化条件下,甲烷最高转化率为43.1%,C2烃收率、选择性和表观能耗分别为40.1%、93.2%和2.41 MJ/mol。C2烃中不饱和烃的体积分数可达95%以上。     

A novel efficient protocol for preparation of 3-formyl-2-arylbenzo[b]furan derivatives

An efficient method for preparation of 3-formyl-2-arylbenzo[b]furan derivatives 4 from 3-chloro-2-(2-methoxyaryl)-1-arylprop-2-en-1-one 2 was developed, and the desired product was obtained in good to excellent yields. By converting 2-(2-methoxyphenyl)-3-oxo-3-phenylpropanal 1 to 2, the regioselectivity problem occurring in the reaction when using 1 as the starting material was successfully avoided. Furthermore, a one-pot procedure for the successive demethylation, cyclization, and hydrolysis was evolved, although the intermediate 3-(dibromomethyl)-2-phenylbenzo[b]furan 3a could be isolated. A plausible mechanism was proposed based on some in situ investigations.     

Extraction kinetics of Uranium(VI) and Thorium(IV) with Tri-iso-amyl phosphate from nitric acid using a Lewis Cell

The extraction kinetics of uranium(VI) and thorium(IV) with Tri-iso-amyl phosphate (TiAP) from nitric acid medium has been investigated using a Lewis Cell. Especially, dependences of the extraction rate on stirring speed, temperature, interfacial area were firstly measured to elucidate the extraction kinetics regimes. The experimental results demonstrated that extraction kinetic of U(VI) is governed by chemical reactions at interface with an activation energy, E_a, of 43.41 kJ/mol, while the rate of Th(IV) extraction is proved to be intermediate controlled, of which the E_a is 23.20 kJ/mol. Reaction orders with respect to the influencing parameters of the extraction rate are determined, and the rate equations of U(VI) and Th(IV) at 293 K have been proposed as $$ {\text{r}} = - {\text{dcUO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} /{\text{dt}} = 1. 80 \times 10^{ - 3} \left[ {{\text{UO}}_{ 2} \left( {{\text{NO}}_{ 3} } \right)_{ 2} } \right]^{ 1.0 1} \left[ {\text{TiAP}} \right]^{0. 5 5} , $$ $$ {\text{r}} = - {\text{dcTh }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} /{\text{dt}} = 1. 8 8\times 10^{ - 3} \left[ {{\text{Th }}\left( {{\text{NO}}_{ 3} } \right)_{ 4} } \right]^{ 1.0 4} \left[ {\text{TiAP}} \right]^{ 1. 7 7} \left[ {{\text{HNO}}_{ 3} } \right]^{0. 3 8} , $$ respectively.     

Determination of tritium in Li–Pb alloy irradiated by thermal neutrons with quantitatively analyzing the byproduct 4He

The mass of the tritium produced in ⁶Li(n,α)T reaction was obtained by quantitatively analyzing the byproduct ⁴He with mass spectrometer. The self-expending seal method was employed to quantitatively prepare the Li–Pb alloy targets in room temperature. They were irradiated for 2 h in two rabbit irradiation channels in Xi’an pulsed reactor and measured after cooling 15 days. A sample purifying unit was set up to get rid of the hydrogen isotopes to remarkably reduce the interference to helium isotopes when measuring. And the sample disposal platform including purifying unit was testified with simulative gas and nature atmosphere. The targets were melted at 700 °C to release most of the ⁴He atoms which were measured by adding dilution gas ³He. And it was testified that ⁴He had released completely by repetitiously melting the targets. This approach had solved the problem that the tritium couldn’t be accurately determined by directly analyzing it because of non-complete releasing from lithium alloy.     

Simultaneous determination of atropine,scopolamine, and anisodamine from Hyoscyamus niger L. in rat plasma by high‐performance liquid chromatography with tandem mass spectrometry and its application to a pharmacokinetics study

In order to investigate the pharmacokinetics of tropane alkaloids in Hyoscyamus niger L., a sensitive and specific high‐performance liquid chromatography with tandem mass spectrometry method for the simultaneous determination of atropine, scopolamine, and anisodamine in rat plasma is developed and fully validated, using homatropine as an internal standard. The separation of the four compounds was carried out on a BDS Hypersil? C₁₈ column using a mobile phase consisting of acetonitrile and water (containing 10 mmol ammonium acetate). Calibration curves were linear from 0.2 to 40 ng/mL for atropine, scopolamine, and from 0.08 to 20 ng/mL for anisodamine. The precision of three analytes was <5.89% and the accuracy was between ?1.04 to 2.94%. This method is successfully applied to rat pharmacokinetics analysis of the three tropane alkaloids after oral administration of H. niger extract. The maximum concentration of these three tropane alkaloids was reached within 15 min, and the maximum concentrations were 31.36 ± 7.35 ng/mL for atropine, 49.94 ± 2.67 ng/mL for scopolamine, and 2.83 ± 1.49 ng/mL for anisodamine. The pharmacokinetic parameters revealed areas under the curve of 22.76 ± 5.80, 16.80 ± 3.08, and 4.31 ± 1.21 ng/h mL and mean residence times of 2.08 ± 0.55, 1.19 ± 0.45, and 3.28 ± 0.78 h for atropine, scopolamine, and anisodamine, respectively.     

Biological evaluation of 2-methylpyrimidine derivatives as active pan Bcr-Abl inhibitors

We designed a series of 2-methylpyrimidine derivatives as new BCR-ABL inhibitors using scaffold-hopping strategy.These synthetic compounds exhibited significant inhibition against a broad spectrum of Bcr-Abl mutants including the gatekeeper T315I mutant.Compound 7u showed very potent kinase inhibitory activities against Bcr-Abl WT,Bcr-Abl E255K,Bcr-Abl Q252H,Bcr-Abl G250E and Bcr-Abl T315I,with IC50 values of 0.13 nM,0.17 nM,0.24 nM,0.19 nM and 0.65μM,respectively.This compound also displayed anti-proliferation activity against K562 cell line with an IC50 value of 1.1 nM,thus representing a new lead for further optimization.     

Thermoresponsive AuNPs Stabilized by Pillararene‐Containing Polymers

Pillararene‐containing thermoresponsive polymers are synthesized via reversible addition–fragmentation chain transfer polymerization using pillararene derivatives as the effective chain transfer agents for the first time. These polymers can self‐assemble into micelles and form vesicles after guest molecules are added. Furthermore, such functional polymers can be further applied to prepare hybrid gold nanoparticles, which integrate the thermoresponsivity of polymers and molecular recognition of pillararenes.

     

Protonation and dip-coating synergistically enhancing dimensional stability of multifunctional cellulose-based films

Cellulose - Cellulose-derived films have received increased attention for replacing petrochemical substrates in various high-tech applications. However, many cellulose composite films are usually...     

Double-emulsion templated macroporous cellulose microspheres as a high-performance chromatographic media for protein separation

Cellulose - Cellulose microspheres are commonly chromatographic media yet seriously limited in biomacromolecules separation and purification due to the slow mass transfer kinetics resulting from...