X波段及DBS接收用PHEMT单片低噪声放大器

报道了X波段及DBS接收用单片低噪声放大器的研制结果。利用CAD软件对单片电路进行优化设计，设计工作包括MBE材料、PHEMT器件和单片电路三部分。在研制过程中，开展了关键工艺的专题研究。研究结果为：单级单片放大器在10：5－11．6GHz范围内，NF≤1．82dB，G≥7.72dB；在11．7－12．2GHz范围内，NF≤1．80dB，G≥6．8dB；双级放大器在10．4－11．1GHz范围内，NF≤1．96dB，G≥15．3dB，最低噪声系数为1．63dB，最高增益为16．07dB。     

DISTORTION THEOREM FOR BIHOLOMORPHIC MAPPINGS IN TRANSITIVE DOMAINS (III)

The distortion theorem for biholomorphic convex mappings in bounded symmetric domains are considered. Especially the distortion theorem for biholomorphic convex mappings in classical domain of type IV and two exceptional domains are given.     

Study on the dispersion characteristic of the plasma-loaded relativistic BWO

The dispersion characteristic of the plasma-loaded relativistic backward wave oscillator has been analyzed. The theoretical model has been established and the numerical calculations accord with the experimental results, which provides some useful suggestions on the designing of slow-wave structure of BWO.     

激光辐照对不同饵料微藻生长的影响

利用Nd:YAG激光(波长1.06μm,功率5W,照射时间0.5-3min)和Ar 激光(波长:488nm,功率70mw,照射时间5-20min)分别照射角毛藻和叉鞭金藻,辐照后进行细胞增殖和生长速率的测定。实验结果表明:照射剂量为1min的Nd:YAG激光及剂量为5min的Ar 激光对叉鞭金藻有较明显的促长效果,这两种激光处理组的细胞增殖量在辐照后的两天内较对照组分别高42.9%和48.1%,但这种促长效果随时间的推移逐渐消失。不同剂量的两种激光辐照角毛藻后,在延滞期均出现生长抑制现象,但进入指数生长期或传代培养后,剂量为1min的Nd:YAG激光及剂量为10min的Ar 激光对角毛藻有明显的促长效果,其中在指数生长期1min剂量的Nd:YAG激光处理可促长27.0%,传代培养后10min的Ar 激光处理组生长速率提高达51.2%。本文对不同激光及不同激光参数条件下,两种饵料藻的耐受性及生长特性的差异也进行分析探讨。本实验结果不仅证实了已有研究的推论,还展示出激光技术在饵料藻种选育中的应用前景。     

MRF: A Framework for Source and Destination Based Bandwidth Differentiation Service

In this paper, we shall generalize the concepts of fairness, TCP-friendliness and TCP-compatibility such that more source adaptation schemes can be designed to support diverse applications over the Internet. A simple but efficient framework, in the form of a monotonic response function (MRF), is proposed for the analysis and the design of memoryless window-based source adaptation protocols by using these concepts. We first derive a necessary and sufficient condition for step-wise convergence to the weighted fairness. It is then used to construct increase-decrease policies. The requirements of our increase-decrease policy are less conservative than those of the CYRF (Choose Your Response Function) that was proposed in . Our MRF is suitable for transmission control protocol (TCP) and user datagram protocol (UDP), and can be used to design TCP-friendly and multimedia-friendly source adaptation schemes. Meanwhile, our MRF can be applied to provide bandwidth differentiation service without any change to the router of the existing Internet.     

电子商务中SET协议的安全缺陷研究

目前SET协议在电子商务交易中应用越来越广泛,因此,对SET协议的安全性的要求就越来越高。论文在SET协议的交易流程基础上,分析了其安全机制采用的技术和优点,指出了SET协议安全性存在的一些问题。     

A 3-D Miniaturization Method for Low-Impedance Designs

Microstrip interconnects with a V conductor are designed, fabricated, and measured to provide a compact solution for designs requiring low characteristic impedance lines. S-parameter curves are shown up to 35 GHz for 0.5-cm-long lines. The 308-mum-deep V structure produces a 33.8-Omega line with strong standing waves and reflections under 5 dB. To further reduce the impedance, a partial shield is added that results in 6.7 times reduction of signal line width, near elimination of open-end effect, and excellent correlation with a standard 15-Omega microstrip up to 25 GHz. A filter demonstration shows near ideal behavior in the 3 dB response and low return loss when compared to a similar conventional design.     

雷达目标特征提取的一种方法

将小波变换和马氏距离相结合，提出了一种基于ISAR成像的雷达目标特征提取方法。对ISAR成像数据进行正交二进Symlet小波分解和门限处理，对数据进行压缩，然后计算压缩后坐标点的马氏（Mahalanobis)距离，得到目标稳定的特征向量。由实验结果看出，此向量具有在一定范围内的不变性，能够用于雷达目标识别。     

函数模拟法求解锥形模超塑挤压的力学场——超塑挤压解析理论之一

本文首次用模拟位移函数的方法,给出锥形模超塑挤压力学场的解析式以及应变、应变速率和应力的约束方程。由于实验选用的是典型超塑性合金ZnAl₅,所以结果有相当的包络性。即使对于非典型超塑性材料,这种方法亦有普遍意义。     

PMD Measurement of Hollow-Core Photonic Bandgap Fiber by Investigating Power Penalty of Optically Generated Microwave Signals

A simple method based on carrier suppression modulation for measuring first-order polarization-mode dispersion of hollow-core photonic bandgap fiber (HC-PBGF) is proposed and investigated. By adjusting the incident optical wavelength and measuring the power penalty of optically generated microwave signals, the wavelength-dependent differential group delay (DGD) in HC-PBGF can be obtained. Moreover, this proposed method is chromatic-dispersion-insensitive. The experimental results indicate that a segment of 20-m HC-PBGF exhibits highly birefringent DGD of 25, 59, and 84 ps with measurement error less than 2 ps for the incident optical wavelength of 1560, 1575, and 1580 nm, respectively