POLYMER-SUPPORTED RARE EARTH CATALYSTS FOR STYRENE POLYMERIZATION

The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd polymeric complex is characterized by IR and its catalytic activity, and the polymerization features have been investigated in comparison with that of the conventional Ziegler-Natta catalysts. When [Nd]=1×10~(-3) mol/L, [M]=5mol/L, Al/Nd=170(mol ratio) and CCl_4/Nd=50(mol ratio), the polymerization conversion of styrene gets to 51.6% in six hours, and the catalytic activity reaches 1852 gPS/gNd, which is much higher than that of conventional rare earth catalysts. The polymerization reaction has an induction period and shows some characteristics of chain polymerization. The polymerization rate is the first order with respect to the concentration of styrene monomer. Addition of FeCl_3 does not suppress the polymerization.     

Sesquiterpenoids and Phenylpropane Derivatives from Sonchus uliginosus

Six new compounds were isolated from the whole plant of Sonchus uliginosus, including three eudesmane‐type sesquiterpenoids (1β,6α)‐1,6,14‐trihydroxyeudesm‐3‐en‐12‐oic acid γ‐lactone ( 1 ), (1β,6α)‐1,6,14‐trihydroxyeudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 2 ), and (1β,6α)‐1,6‐dihydroxy‐14‐O‐[(4‐hydroxyphenyl)acetyl]eudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 3 ), and three phenylpropane derivatives, 4‐hydroxy‐γ,3,5‐trimethoxybenzenepropanol ( 6 ), γ,3,4,5‐tetramethoxybenzenepropanol ( 7 ), and γ,3,4,5‐tetramethoxybenzenepropanol acetate ( 8 ), together with the two known compounds 4 and 5 . The new structures were elucidated by means of spectroscopic methods, such as IR, EI‐MS, HR‐ESI‐MS, 1D‐ and 2D‐NMR, and by comparison of the spectroscopic data with those reported for structurally related compounds.     

The CO_2 laser-induced radical-chain reactions between CH_3CF_2H and chlorine-atom donors CF_2ClCFCl_2, CF_3CCl_3 CFCl_3 or CF_2Cl_2

The CO_2 laser induced room temperature reactions of CH_3CF_2H or another protium-donorCH_3CHClCH_3 with chlorine-atom donors (Z--Cl) CFCl_2CF_2Cl, CF_3CCl_3, CFCl_3 or CF_2Cl_2, havebeen investigated. Some of these reactions can yield two important monomers (CF_2=CH_2 andCF_2=CFCl) for fluoropolymers simultaneously. The yield dependence of these two alkenes on experi-mental conditions has been studied. A laser-initiated chain process is supported by identifica-tion of Z--H intermediates in these reactions.     

掺杂阴离子对电化学合成的聚邻甲苯胺性质的影响

邻甲苯胺在酸性介质中的聚合速率与酸的种类有关,聚合速率影响了各种掺杂阴离子聚合物膜的形态,聚合物的电导率、循环伏安曲线形状受掺杂阴离子的影响,其电容量与掺杂阴离子的种类及形态有关,阴离子的种类对电极电位和紫外-可见光谱无影响。     

2-[(卤代苯胺基)羰基]苯甲酸与Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)的配合物研究

本文报道了4种2-[(卤代苯胺(?))羰基]苯甲酸与Cu(Ⅱ)、Ni(Ⅱ)、Co(Ⅱ)配合物的制备,并通过元素分析、热重分析、红外光谱和电子光谱分析以及磁化率测定对它们进行了表征.结果证明,配合物是通过羧酸根上羟基氧原子和酰胺羰基上氧原子配位成键,除Cu(Ⅱ)配合物分子为平面正方形结构外.其余均为八面体结构,只是扭曲程度不同.并对它们的配位场参数进行了计算.     

新型微填充柱－毛细管柱二维色谱系统过程的动力学研究

从色谱动力学角度对新型微填充柱－毛细管柱二维色谱系统过程中双柱条件与流出曲线及柱效之间的依赖关系加以系统研究。结果表明：由于双柱条件之间存在关联，双柱系统流出曲线特征与单柱系统存在一定的差异，流出曲线一阶矩和二、三阶中心矩以及双柱系统的柱效皆由预柱和主柱条件综合确定。     

N,N′‐Bis(2‐pyridylmeth­yl)ferrocene‐1,1′‐diyldicarboxamide and N,N′‐bis­(3‐pyridylmeth­yl)ferrocene‐1,1′‐diyldicarboxamide

The mol­ecules of N,N′‐bis­(2‐pyridylmeth­yl)ferrocene‐1,1′‐diyl­dicarboxamide, [Fe(C₁₂H₁₁N₂O)₂], contain intra­molecular N—H⋯N hydrogen bonds and are linked into sheets by three independent C—H⋯O hydrogen bonds. The mol­ecules of the isomeric compound N,N′‐bis­(3‐pyridylmeth­yl)ferrocene‐1,1′‐diyldicarboxamide lie across inversion centres, and the mol­ecules are linked into sheets by a combination of N—H⋯N hydrogen bonds and π–π stacking inter­actions between pyridyl groups.     

Thermochemistry of the solid complex Gd(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>(phen)

Summary A ternary solid complex Gd(Et₂dtc)₃(phen) has been obtained from reactions of sodium diethyldithiocarbamate (NaEt₂dtc), 1,10-phenanthroline (phen) and hydrated gadolinium chloride in absolute ethanol. The title complex was described by chemical and elemental analyses, TG-DTG and IR spectrum. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH^Θ_m(l), was determined as (-11.628±0.0204) kJ mol^-1 at 298.15 K by a RD-496 III heat conduction microcalorimeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH^Θ_m(s), was calculated as (145.306±0.519) kJ mol^-1 on the basis of a designed thermochemical cycle. The thermodynamics of reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A), the reaction order (n), the activation enthalpy (Δ_rH^Θ_≠), the activation entropy (Δ_rS^Θ_≠), the activation free energy (Δ_rG^Θ_≠) and the enthalpy (Δ_rH^Θ_≠), were obtained by combination of the thermodynamic and kinetic equations for the reaction with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-18673.71±8.15) kJ mol^-1 by a RBC-II rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH^Θ_m, and standard enthalpy of formation, Δ_fH^Θ_m, were calculated to be (-18692.92±8.15) kJ mol^-1 and (-51.28±9.17) kJ mol^-1, respectively.     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.     

Controlled ring‐opening polymerization of propylene oxide catalyzed by double metal‐cyanide complex

A double metal‐cyanide catalyst based on Zn₃[Co(CN)₆]₂ was prepared. This catalyst is very effective for the ring‐opening polymerization of propylene oxide. Polyether polyols of moderate molecular weight having low unsaturation (<0.015 meq/g) can be prepared under mild conditions. The molecular weight of polymer is entirely controlled by a reacted monomer‐to‐initiator ratio. The polymers prepared with stepwise addition of monomer exhibit a narrower molecular weight distribution as compared with those prepared with one‐step addition of monomer. Various compounds containing active hydrogen, except basic compounds and low‐carbon carboxylic acid, may be used as initiators. The reaction rate increases with increasing catalyst amount and decreases with rising initiator concentration. Polymerization involves a rapid exchange reaction between the active species and the dormant species. It was also proven that, to a certain extent, the chain termination of this catalytic system is reversible or temporary. ¹³C NMR analysis showed that the polymer has a random distribution of the configurational sequences and head‐to‐tail regiosequence. It is assumed that the polymerization proceeds via a cationic coordination mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1142–1150, 2002