K_2CO_3/Ni(OAc)_2催化下的以苯甲酰胺和N,N-二溴苯甲酰胺为氮溴源的胺溴化反应(英文)

本文报道了一个高效的以苯甲酰胺和N,N-二溴苯甲酰胺为氮溴源的胺溴化反应。这个反应有广泛的底物适应性、很好的产率及较高的非对映选择性。本文报道的胺溴化反应用金属无机盐和碱作为共同催化剂,与作者们以前报道的胺卤化反应不同。     

2,4-二氧乙酸苯甲酸镉配合物的合成、晶体结构、荧光性质及与DNA作用

以自行设计合成的兼有刚柔两性的芳香三羧酸2,4-二氧乙酸苯甲酸(H3BOABA)为第一配体,菲咯啉(phen)为第二配体,合成了2个配合物[Cd3(BOABA)2(phen)2](1),[CdNa(BOABA)(phen)](2)。用元素分析、红外光谱、热重分析等进行表征;用单晶X-衍射方法测定了配合物的晶体结构,配合物1是三金属簇的一维双链,phen修饰在两侧,大量的弱π-π堆积作用使得分子呈现出二维平面结构,配合物2是由镉、钠2种金属离子构成的(3,4,7)-连接的二维平面结构。用溴化乙锭荧光探针初步研究了它们与DNA作用的强度和模式;此外对它们的固体荧光性质进行了研究,2种配合物均表现出了较好的发光性质。     

Enantioselective Construction of Functionalized Thiochromans via Squaramide‐Catalyzed Asymmetric Cascade Sulfa‐Michael/Michael Addition

An efficient enantioselective cascade sulfa‐Michael/Michael addition reaction of trans‐3‐(2‐mercaptophenyl)‐2‐propenoic acid ethyl ester with nitroalkenes catalyzed by a chiral squaramide catalyst was disclosed. This cascade reaction afforded thiochroman derivatives with three contiguous stereocenters in high yields (up to 94%), excellent diastereoselectivities (up to >25:1 dr) and enantioselectivities (up to 99% ee).     

A ladder conjugated polymer transducer for solid-contact Cu2+-selective electrodes

In recent years, there has been a pronounced interest in solid-contact ion-selective electrodes （SC-ISEs）, with emphasis on the use of conducting polymers as ion-to-electron transducer. In this work, a ladder conjugated polymer, thieno[3,2-b]thiophene （LCPT）, was investigated in fabricating Cu2＋-selective electrodes for the first time. The resulting electrodes were characterized by electrochemical impedance spectroscopy （EIS）, chronopotentiometry, and the water layer test. Results proved that the active LCPT facilitates the ion-to-electron transduction, and avoids the detrimental aqueous layer formed at the interface of SC-ISEs.     

Sulfur/carbon composites prepared with ordered porous carbon for Li-S battery cathode

Ordered porous cabon with a 2-D hexagonal structure,high specific surface area and large pore volume was synthesized through a twostep heating method using tri-block copolymer as template and phenolic resin as carbon precursor.The results indicated the electrochemical performance of the sulfur/carbon composites prepared with the ordered porous carbon was significantly affected by the pore structure of the carbon.Both the specific capacity and cycling stability of the sulfur/carbon composites were improved using the bimodal micro/meso-porous carbon frameworks with high surface area.Its initial discharge capacity can be as high as 1200 mAh·g~(-1) at a current density of 167.5 mA·g~(-1)The improved capacity retention was obtained during the cell cycling as well.     

Preparation and characterization of Ti0.7Sn0.3O2 as catalyst support for oxygen reduction reaction

Sn-doped TiO_2 nanoparticles with high surface area of 125.7 m~2·g~(-1) are synthesized via a simple one-step hydrothermai method and explored as the cathode catalyst support for proton exchange membrane fuel cells.The synthesized support materials are studied by X-ray diffraction analysis,energy dispersive X-ray spectroscopy and transmission electron microscopy.It is found that the conductivity has been greatly improved by the addition of 30 mol%Sn and Pt nanoparticles are well dispersed on Ti_(0.7)Sn_(0.3)O_2 support with an average size of 2.44 run.Electrochemical studies show that the Ti_(0.7)Sn_(0.3)O_2 nanoparticles have excellent electrochemical stability under a high potential compared to Vulcan XC-72.The as-synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 exhibits high and stable electrocatalytic activity for the oxygen reduction reaction.The Pt/Ti_(0.7)Sn_(0.3)O_2 catalyst reserves most of its electrochemically active surface area(ECA),and its half wave potential difference is 11 mV,which is lower than that of Pt/XC-72(36 mV) under 10 h potential hold at 1.4 V vs.NHE.In addition,the ECA degradation of Pt/Ti_(0.7)Sn_(0.3)O_2is 1.9 times lower than commercial Pt/XC-72 under 500 potential cycles between 0.6 V and 1.2 V vs.NHE.Therefore,the as synthesized Pt/Ti_(0.7)Sn_(0.3)O_2 can be considered as a promising alternative cathode,catalyst for proton exchange membrane fuel cells.     

黄油中8种类固醇激素的液相色谱/串联质谱检测

建立了黄油中雌酮、α-雌二醇、β-雌二醇、雌三醇、睾酮、表睾酮、孕酮和丙酸睾酮8种类固醇激素的凝胶渗透色谱(GPC)-液相色谱/串联质谱(LC-MS/MS)检测方法。样品用乙酸乙酯-环己烷(1∶1,V/V)提取,提取液经GPC柱净化除脂,GPC浓缩液采用C18色谱柱(100 mm×2.0 mm i.d.,3.0μm)分离,以乙腈和水为流动相进行梯度洗脱,电喷雾电离多反应监测模式进行定性和定量分析。8种类固醇激素以基质匹配外标法定量,药物在1.0~20.0μg/kg线性范围内相关系数(r)均大于0.999;方法检出限(S/N=3)为0.04~0.30μg/kg,定量限LOQs(S/N=10)为1.0μg/kg;添加水平为1.0,2.0,4.0μg/kg时,回收率范围在64.1%~110%之间;相对标准偏差(RSD)小于11%。结果表明,本方法准确、可靠,满足黄油中8种类固醇激素的检测分析要求。     

Mo_8~ⅤW_2~ⅥO_(26)(C_5H_5N)_8·2H_2O: A Novel Mixed-valence Heterometal Polyoxometalate

A new mixed-valence heterometal cluster Mo8VW2VIO26(C5H5N)8·2H2O has been synthesized under solvothermal conditions and characterized by X-ray single-crystal diffraction, IR, UV-vis and XPS spectroscopy. The title compound crystallizes in the triclinic system, space group P1 with a = 11.708(3), b = 12.018(4), c = 13.316(4) , a = 112.184(4), β = 97.844(4), r = 110.043(3)o, V = 1551.9(8) 3 and Z = 1 at 293(2) K. The final full-matrix least-squares refinement converged to R = 0.0414 for 4460 observed unique reflections with I 2σ(I) and w R = 0.1290 for all data(5352) and S = 1.015. In addition, its thermal stability and fluorescent property have also been investigated.     

Ethylene polymerization with novel phenoxy-imine catalysts bearing 4-vinylphenyl group

This contribution reports ethylene polymerization behavior of titanium complexes incorporating bis(phenoxyimine) ligands. Six phenoxy-imine Ti(IV) complexes {6-R1-2-[CH=N(2,6-difluoro-3,5-diR2-4-R3Ph)]C6H3O}2TiCl2(1: R1 = H, R2 = H, R3 = H; 2: R1 = H, R2 = H, R3 = 4-vinylphenyl; 3: R1 = CH3, R2 = H, R3 = H; 4: R1 = CH3, R2 = H, R3 = 4-vinylphenyl; 5: R1 = CH3, R2 = F, R3 = H; 6: R1 = CH3, R2 = F, R3 = 4-vinylphenyl) have been synthesized and evaluated for ethylene polymerization using dried MAO(simplified as DMAO) as cocatalyst. An obvious catalytic heterogeneity of Cat 2(Complex 2/DMAO) towards ethylene polymerization was observed, which was illustrated by decreased activity, multimodal molecular weight distribution and partially improved particle morphology comparing with Cat 1. Moreover, Cat 3 exhibits "living" characteristics in the process under certain conditions(25 °C, less than 20 min). Otherwise, the moderate to high ethylene polymerization activity of ca. 105-106 g PE/(mol Ti·h) and high molecular weight(Mw = 105-106) of polyethylene can be obtained by changing the skeleton structure of these complexes.