一种低压低功耗SRAM/SOI单元设计

提出一种改进4管自体偏压结构SRAM/SOI单元.基于TSUPREM4和MEDICI软件的模拟和结构性能的分析,设计单元结构并选取结构参数.该结构采用nMOS栅下的含p+埋沟的衬底体电阻代替传统6管CMOSSRAM单元中的pMOS元件,具有面积小、工艺简单的优点.该结构可以在0.5V的电源电压下正常工作,与6管单元相比,该单元瞬态响应正常,功耗只有6管单元的1/10,满足低压低功耗的要求.     

两种自主开发的图形外延SiGe工艺

使用清华大学微电子学研究所研发的UHV/CVD系统深入研究了图形外延SiGe工艺,分别选用单一的SiO2介质层和SiO2/P0ly-Si复合介质层,作为图形外延SiGe单晶材料的窗口屏蔽介质,开发出了不同的实用化图形外延SiGe工艺.     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

SiGe HBT基区结构的优化对欧拉电压的影响

欧拉电压是SiGe HBT一项重要的直流参数,受到基区结构(如Ge组分)的影响。研究发现,高温过程会导致硼的外扩散,从而影响异质结的位置,使欧拉电压受到影响。实验发现,通过优化基区结构,加厚CB结处i-SiGe厚度,可获得VA=520 V,βVA=164,320 V的SiGe HBT。     

高频地波雷达相位补偿系统

OSMAR2000采用的是“一发八收,收发共用”模式的相控阵高频地波雷达.为了扩大其探测的范围,在新的雷达系统中将采用多发多收的模式,从而导致当信号通过通道后,信号的相位会因受到通道的调制而发生改变,使得雷达无法正常工作,因此需要对通道的相位进行实时监控和补偿.在参考了低频段的相位测量原理和射频段的相移电路的设计理论的基础上,该文提出了基于差分放大器、容阻和容感器件的高频地波雷达收发通道的相位控制系统.     

The Effects of Filtered Channel Quality Feedback on Throughput of Proportional Fair Algorithm

1　IntroductionSchedulingalgorithmsarewidelystudiedforwirelesspacketdatasystems,whichgenerallyhavetwobasiccategories,oneisoptimizedforsystemthroughputandfairness[1～ 2 ] ,andtheotherisforthequalityofservice[3～6] .Forsystemswherepack etdataaretimedivisionmultiplexedacrossusersonthedownlink ,orfromBaseStation (BS)tomultipleMobileStations(MS) ,theBSusesschedulingalgo rithmstodecidewhichuseristransmittedto .ItisindicatedinRefs.[7,8]thatschedulingonlyoneus eratatimeisoptimalfromthepointofviewo…     

中国香港电信盈科公司近期经营业绩分析

中国香港电信与盈科数码动力有限公司合并以后更名为电信盈科。它由一家以技术为主的电信公司转型为亚太地区、特别是两岸三地的商界及个人客户提供服务的综合通信服务供应商，主要提供电话服务、互联网、商企电贸服务、数据中心、客户联络中心、环球通信服务和基建业务。分析了2001-2002年上半年其电信、商企电贸、基建以及与Telstra结盟等业务市场的经营情况。     

基于遗传算法的图像边缘信息链表匹配技术

提出了一种基于遗传算法的图像边缘信息链表匹配方法。首先,采用CANNY算子的方法提取图像边缘;然后,将图像边缘信息链表化;最后,基于链表化结果利用遗传算法进行链表匹配。该方法能够减少匹配过程中的计算量,且能实现高效匹配。通过仿真实验,验证了该方法的性能。     

电子商务中信息传输与共享

电子商务中信息传输与共享技术是电子商务的核心技术 ,电子商务是以Internet为基础的新兴产业 ,保护信息的安全无疑是十分重要的 ,人们越来越多地使用计算机网络来传送对安全敏感的信息 ,所以在信息传输域共享中 ,认证业务、保密业务、数据完整性业务、不可否认业务是当前电子商务急需解决的关键技术 ,本文对这方面做了一些探讨并提出自己的看法     

Direct recursive structures for computing radix-r two-dimensional DCT/IDCT/DST/IDST

In this paper, new recursive structures for computing radix-r two-dimensional (2-D) discrete cosine transform (DCT) and 2-D inverse DCT (IDCT) are proposed. The 2-D DCT/IDCT are first decomposed into cosine-cosine and sine-sine transforms. Based on indexes of transform bases, the regular pre-addition preprocess is established and the recursive structures for 2-D DCT/IDCT, which can be realized in a second-order infinite-impulse response (IIR) filter, are derived without involving any transposition procedure. For computation of 2-D DCT/IDCT, the recursive loops of the proposed structures are less than that of one-dimensional DCT/IDCT recursive structures, which require data transposition to achieve the so-called row-column approach. With advantages of fewer recursive loops and no transposition, the proposed recursive structures achieve more accurate results and less power consumption than the existed methods. The regular and modular properties are suitable for very large-scale integration (VLSI) implementation. By using similar procedures, the recursive structures for 2-D DST and 2-D IDST are also proposed.