Regiospecific Synthesis of N-Sulfanilyl Heterocyclic Ketene Aminals

Heterocyclic ketene aminals 1 or 2 reacted with N-acetylsulfanilyl chloride 3 in the presence of sodium hydride to afford N-sulfanilyl heterocyclic ketene aminals 4 or 5 regiospecifically.     

Tetra­aqua(2,2′‐bi­pyridine)­nickel(II) terephthalate

The reaction of nickel(II) nitrate with terephthalic acid and 2,2′‐bi­pyridine in di­methyl­form­amide solution gives the title complex, [Ni(C₁₀H₈N₂)(H₂O)₄](C₈H₄O₄). The Ni^II ion is octahedrally coordinated to one 2,2′‐bi­pyridine and four water mol­ecules and does not coordinate to the terephthalate anion. Hydro­gen bonds between the terephthalate anions and the [Ni(2,2′‐bipy)(H₂O)₄]²⁺ cations produce a two‐dimensional hydrogen‐bonding architecture with double sheets.     

Synthesis and Characterization of Amphiphific Block Copolymer Containing PVP and Poly（5-benzyloxytrimethylene carbonate）

Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydroxyl terminated PVP, synthesized with 2-mercaptoethanol as a chain transfer reagent, was employed as a rnacroinitiator. The resulting copolymers were characterized by GPC, ^1H NMR and IR. Increasing the BTMC/PVP-OH feed ratio （[B]/[P]） resulted in the increase of Mn of corresponding copolymers and the decrease of Mw/Mn. Immobilized enzyme has comparable catalytic activity to SnOct2 for the copolymerization.     

稀土对管线钢中碳化物溶解与析出行为的影响

以X80管线钢为研究对象,研究了稀土对含铌钢奥氏体化与析出行为的影响。利用热力学固溶度积公式,计算了铌碳化物的溶解温度;借助显微组织观察与硬度测试,对比分析了稀土对高温下奥氏体晶粒粗化及不同温度淬火回火后硬度的影响;通过热模拟实验并利用透射电镜,研究了稀土对实验钢在热变形过程中铌碳氮化物析出行为的作用机制。结果表明:稀土元素的加入降低了碳氮化物的固溶温度,促进了Nb(C,N)等第二相粒子的固溶,稀土能够促进热变形过程中Nb(C,N)的析出,从而提高铌元素的析出强化效果。     

Characterization of organometallic coordinative cluster compounds of silver by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was successfully applied to characterize the organosilver coordinative cluster compounds, silver phenylacetylide and three silver thiolates, namely, silver tertiary butylthiolate, silver 2,6-dimethylbenzenethiolate, and silver 2, 6-dichlorobenzenethiolate. Samples and dithranol matrix were finely dispersed in 1:1 tetrahydrofuran (THF)/chloroform (CHCl(3)) mixed solvent. In most cases the monomer units remained intact during ionization, and the oligomeric molecular ions were produced through silver cationization, with a general molecular ion formula [nM + Ag](+). This was further verified by the relative abundances of the isotopic peaks within the molecular ion clusters, which were in close agreement with those theoretically calculated for nM cationized with one silver ion. In the case of silver 2, 6-dichlorobenzenethiolate, in addition to the dominant [nM + Ag](+) peaks, weak peaks corresponding to the successive losses of hydrogen chloride molecules were observed. Copyright 2000 John Wiley & Sons, Ltd.     

印刷有机数字电路及应用

印刷有机电子技术是基于印刷原理的有机电子器件制造技术,是指将有机电子材料配制成功能性油墨,用印刷方式来制造电子器件与系统的方法,其发展涉及到材料化学、微电子学等多个学科方面的知识。其独特的制造方式和器件形态具有柔性、低成本、大面积制造等优势,并且与传统硅基电子器件在应用场合上形成了互补,在生物传感、电子皮肤、柔性显示等领域展示出优势。为了及时跟进这一快速发展的领域,对领域的发展有宏观的把握,本文从印刷技术和电路系统的角度进行了全面概述,介绍了喷墨打印、丝网印刷和转印印刷等印刷技术和基于印刷技术制备的有机数字电路(反相器、与非门、环形振荡器、D触发器),以及实现功能化的印刷电子应用(RFID、电子皮肤、OLED显示驱动背板等);最后,对本领域目前存在的问题和未来发展方向做了简要探讨。     

Voltammetric study of copper(I) thioacetamide complexes

Summary The composition and stability of copper(I) complexes with thioacetamide (TAA) have been evaluated with the help of square-wave voltammetry using the fast pulse technique. Two species, namely Cu(I) (TAA) and Cu(I) (TAA)₂, have been identified having the formation constants log ₁=16.85; log ₂=18.03. The complex is stable in highly acidic medium (pH1). The application for the determination of copper is pointed out.     

聚羟基丁酸酯/碳纳米管复合纳米纤维膜的制备及其对重金属离子吸附分离性能的研究

以聚羟基丁酸酯和碳纳米管为原料,采用三氯甲烷/二甲基甲酰胺混合溶液为溶剂,利用静电纺丝技术制备了聚羟基丁酸酯/碳纳米管复合纳米纤维膜.研究了碳纳米管的含量对纳米纤维膜形貌和力学性能的影响,探讨了复合纳米纤维膜对重金属Cu(II)、Cd(II)和Pb(II)的吸附特性.实验结果表明:加入1 wt%碳纳米管能够将纳米纤维的平均直径从(728±146)nm降低至(468±89)nm,纳米纤维膜的比表面积从27.24 m~2/g提高至43.45 m~2/g;碳纳米管的复合能够有效增强聚羟基丁酸酯纳米纤维,当碳纳米管含量1 wt%为最佳,拉伸强度可达5.85 MPa,较纯聚羟基丁酸酯纳米纤维提升了115%.复合纳米纤维膜对重金属离子具有良好的吸附特性,其对Cu(II)、Cd(II)和Pb(II)的最佳吸附pH值为5,此时最大吸附容量分别为91.04、171.05和197.03mg/g,平衡吸附时间分别约为50、60和60 min,吸附率分别为1.79、2.83和3.28 mg/g/min;热力学和动力学分析表明,复合纳米纤维膜对重金属Cu(II)、Cd(II)和Pb(II)的吸附行为更符合Freundlich模型,吸附过程更符合Pseudo-second order模型;循环使用实验表明,重复使用5次后,其吸附容量可保持在初始值的87%以上,具有较好的使用寿命.     

Antibacterial membranes based on chitosan and quaternary ammonium salts modified nanocrystalline cellulose

Etherification of nanocrystalline cellulose (NCC) with three kinds of quaternary ammonium salts epoxypropyltrimethylammonium chloride, N,N‐dimethyl‐N‐dodecyl‐N‐(1,2‐epoxypropyl) ammonium chloride (DMDEPAC), and N,N‐dimethyl‐N‐octadecyl‐N‐(1,2‐epoxypropyl) ammonium chloride (DMOEPAC) was successfully performed via a nucleophilic addition reaction. The synthesized DMDEPAC and DMOEPAC were characterized by nuclear magnetic resonance. The modified NCC particles, NCC epoxypropyltrimethylammonium chloride, NCC‐DMDEPAC, and NCC‐DMOEPAC, were characterized by energy dispersive spectrometer. Nanocomposite films based on chitosan (CS) containing quaternary ammonium salts modified NCC were prepared with nanoparticle loadings of 5.0, 7.5, and 10.0%, respectively. The effect of nanoparticle content on the tensile strength of composite films was studied. The results indicated that the films with 5.0% nanoparticle loading exhibited the biggest increase in tensile strength. Surface morphology, smoothness, and antibacterial properties of composite films containing 5% modified NCC were also studied. CS/NCC‐DMDEPAC‐5.0 and CS/NCC‐DMOEPAC‐5.0 displayed excellent biocidal abilities against both Gram‐positive Staphylococcus aureus (ATCC 6538) and Gram‐negative Escherichia coli O157:H7 (ATCC 43895). The bio‐based nanocomposite films with increased mechanical strength and excellent antibacterial properties show great potential as food packaging materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Enhanced particle trapping performance of induced charge electroosmosis

By increasing the number of floating electrodes or enlarging the width of single floating electrode, this work provides effective ways to strongly improve the particle trapping performance of induced charge electroosmosis (ICEO). Particle trapping with double or triple separate narrow floating electrodes increases the effective actuating range of ICEO flow and therefore enhance the optimum trapping ability to be 1.63 or 2.34 times of that with single narrow electrode (width of ), and the ideal trapping frequency is independent of the electrode number due to the mutual independence of electrochemical ion relaxation over each electrode. Furthermore, using a single wide floating electrode with the effective width equal to three separate narrow floating electrodes () instead of a single narrow one slightly lowers the ideal trapping frequency due to an increase in the characteristic polarization length, but the trapping performance is only up to 1.59 times of that with original single narrow electrode, implying that vertical channel confinement effect may severely suppresses the effective actuating range of ICEO flow and renders the trapping performance not as expected. Trapping experiments over wide floating electrode with different channel height were carried out, showing that the trapping performance increases by correctly increasing the channel height.