Slow-rise and fast-drop current feature of ultraviolet response spectra for ZnO-nanowire film modulated by water molecules

This study describes the fabrication of ZnO-nanowire films by electro-chemical anodization of Zn foil.The ZnO films are characterized by field emission scanning electron microscopy,X-ray diffraction patterns,and transmission electron microscopy,respectively.The ultraviolet(UV) photo-response properties of the surface-contacted ZnO film are studied through the current evolution processes under different relative humidities.Unlike the usually observed current spectra of the ZnO films,the drop time is shorter than the rise time.The photo-conductivity gain G and the response time τ are both increased with the increase of the applied bias.The photo-conductivity gain G is lowered with the increase of the environmental humidity,while the response time τ is increased.These results can be explained by considering three different surface processes:1) the electron-hole(e-p) pair generation by the UV light illumination,2) the following surface O2-species desorption,and 3) the photo-catalytic hydrolysis of water molecules adsorbed on the ZnO surface.The slow-rise and fast-drop current feature is suggested to originate from the sponge-like structure of the ZnO nanowires.     

Relative enhancement of photoluminescence intensity of passivated silicon nanocrystals in a silicon dioxide matrix

Photoluminescence (PL) intensity of passivated silicon nanocrystals (Si NCs) embedded in a SiO 2 matrix is compared with that of unpassivated Si NCs. We investigate the relative enhancement of PL intensity (I R ) as a function of annealing temperature and implanted Si ion dose. The I R increases simultaneously with the annealing temperature. This demonstrates an increase in the number of dangling bonds (DBs) with the degree of Si crystallization varying via the annealing temperature. The increase in I R with implanted Si ion dose is also observed. We believe that the near-field interaction between DBs and neighboring Si NCs is an additional factor that reduces the PL efficiency of unpassivated Si NCs.     

Nano-scale gap filling and mechanism of deposit-etch-deposit process for phase-change material

Ge2Sb2Te5 gap filling is one of the key processes for phase-change random access memory manufacture.Physical vapor deposition is the mainstream method of Ge2Sb2Te5 film deposition due to its advantages of film quality,purity,and accurate composition control.However,the conventional physical vapor deposition process cannot meet the gapfilling requirement with the critical device dimension scaling down to 90 nm or below.In this study,we find that the deposit-etch-deposit process shows better gap-filling capability and scalability than the single-step deposition process,especially at the nano-scale critical dimension.The gap-filling mechanism of the deposit-etch-deposit process was briefly discussed.We also find that re-deposition of phase-change material from via the sidewall to via the bottom by argon ion bombardment during the etch step was a key ingredient for the final good gap filling.We achieve void-free gap filling of phase-change material on the 45-nm via the two-cycle deposit-etch-deposit process.We gain a rather comprehensive insight into the mechanism of deposit-etch-deposit process and propose a potential gap-filling solution for over 45-nm technology nodes for phase-change random access memory.     

On the determination of laminar flame speed from low-pressure and super-adiabatic propagating spherical flames

The outwardly propagating spherical flame (OPF) method is popularly used to measure the laminar flame speed (LFS). Recently, great efforts have been devoted to improving the accuracy of the LFS measurement from OPF. In the OPF method, several assumptions are made. For examples, the burned gas is assumed to be static and in chemical equilibrium. However, these assumptions may not be satisfied under certain conditions. Here we consider low-pressure and super-adiabatic propagating spherical flames, for which chemical non-equilibrium exists and the burned gas may not be static. The objective is to assess the chemical non-equilibrium effects on the accuracy of LFS measurement from the OPF method. Numerical simulations considering detailed chemistry and transport are conducted. Stoichiometric methane/air flames at sub-atmospheric pressures and methane/oxygen flames at different equivalence ratios are considered. At low pressures, broad heat release zone is observed and the burned gas cannot quickly reach the adiabatic flame temperature, indicating the existence of chemical non-equilibrium of burned gas. Positive flow in the burned gas is identified and it is shown to become stronger at lower initial pressure. Consequently, the LFS measurement from OPF at low pressures is not accurate if the burned gas is assumed to be static and at chemical equilibrium. For super-adiabatic spherical flames, the burned gas speed is found to be negative due to the local temperature overshoot at the flame front. Such negative speed of burned gas can also reduce the accuracy of LFS measurement. It is recommended that the direct method measuring both flame propagation speed and flow speed of unburned gas should be used to determine the LFS at low pressures or for mixtures with super-adiabatic flame temperature.     

Re_3W的点接触安德烈夫反射谱研究

本文通过对不同晶体结构Re_3W样品的点接触测量和对比研究,证实具有中心对称结构和非中心对称结构的Re_3W都是弱耦合Bardeen-Cooper-Schrieffer超导体,同时发现在两个相表面都可以形成很理想的点接触结,即电子通过界面时受到的非弹性散射很弱.将Re_3W样品置于大气环境近六个月后重新进行测量,仍然能够得到类似的结果,表明Re_3W具有很好的稳定性. Re_3W的这种优良特性,不仅可通过点接触实验得到的参数推算出Re_3W两个相的费米速度,而且提供了一种简单的方法,可以在点接触实验中利用Re_3W来印证针尖材料的费米速度和测量其自旋极化率等.作为尝试,本文用Re_3W/Ni点接触结测量了铁磁性金属Ni的自旋极化率,得到了与前人报道一致的结果.     

基于地基观测的时序卫星红外光谱建模与分析

针对地基观测的卫星红外光谱受复杂因素的影响和外场试验对测量卫星物性信息的缺乏,无法解释卫星红外光谱反演出特征的有效性和具体物理意义的问题,提出了一种基于地基观测的卫星热红外光谱的建模和分析的方法.首先,考虑了太阳辐射、地球辐射、卫星各面对探测器的可见情况、地基探测器可探测卫星的范围、大气衰减等因素的影响,更加准确地建立卫星热红外光谱模型.然后,以风云三号卫星为例,利用该模型计算了在观测时序上卫星在地基探测器入瞳上的3—14μm红外光谱辐照度;分析了影响卫星红外光谱变化的主要因素.最后,利用普朗克函数拟合卫星红外光谱,提取出特征与卫星的物性比较,并对其进行分析.结果表明:在各种影响因素中,由卫星运动引起的对探测器可见情况的改变是影响卫星红外光谱数据的主要因素.等效温度和等效面积物理含义能被有效地解释,等效温度接近于太阳帆板的温度,温差仅在15 K左右,等效面积能表征卫星投影面积的变化;发现利用帆板和本体有较大的温差,能实现帆板和本体的分离,并实现新特征的提取.     

里德伯电磁感应透明中的相位

本文在典型的里德伯电磁感应透明系统中研究弱探测场在相互作用原子系统中的传播特性,重点关注基于偶极阻塞效应的探测场相位的合作光学非线性行为.通过与探测场透射率和光子关联作对比,发现相位的光学响应具有新特性:共振和Autler-Townes劈裂条件下相位对入射场强和初始光子关联不敏感,而在两者之间的频率范围内相位响应具有非线性特征,尤其在经典光频率处最显著.此外,提高主量子数和原子密度都会促进相位的非线性效应.综上,与探测场透射率和光子关联一样,相位可以作为合作光学非线性的另一个标识来刻画非线性现象,对里德伯电磁感应透明研究是一个有力的补充.     

13.56 MHz/2 MHz柱状感性耦合等离子体参数的对比研究

通过Langmuir双探针和发射光谱诊断方法,对比研究了驱动频率为13.56 MHz和2 MHz柱状感性耦合等离子体中电子密度和电子温度的径向分布规律.结果表明:在高频和低频放电中,输入功率的增加对等离子体参数产生了不同的影响,高频放电中主要提升了电子密度,低频放电中则主要提升了电子温度.固定气压为10 Pa,分别由高频和低频驱动时,电子密度的径向分布均为"凸型".而电子温度的分布差异比较明显,高频驱动时,电子温度在腔室中心较为平坦,在边缘略有上升;低频驱动时,电子温度随径向距离的增加而逐渐下降.为了进一步分析造成这种差异的原因,在相同放电条件下采集了氩等离子体的发射光谱图,利用分支比法计算了亚稳态粒子的数密度,发现电子温度的径向分布始终与亚稳态粒子的径向分布相反.继续升高气压到100 Pa,发现不论高频还是低频放电,电子密度的径向分布均从"凸型"转变为"马鞍形",较低气压时电子密度的均匀性有了一定的提升,但低频的均匀性更好.     

基于电磁力近似算法的驱动电机NVH快速仿真方法

电动汽车驱动电机产生的电磁噪声是汽车NVH关注的重点问题,对其进行全转速段多工况NVH仿真通常需要耗费大量时间和计算资源。该文通过有限单元分析揭示了电机气隙电磁力随转速变化的规律,并根据这一规律提出了基于外特性曲线的电磁力时间缩放及插值的近似算法。文章采用电磁力到结构网格的映射算法对结构振动有限元模型进行激励力加载,使用声场有限元方法计算电机的辐射噪声,最终实现了车用驱动电机的电磁振动及噪声的快速仿真。使用该方法对车用电机进行全转速段振动噪声仿真,可大大压缩多工况电磁场有限元分析所需的计算时间,提升仿真效率。