Electrochemical Determination of Ascorbic Acid at γ-MnO<Subscript>2</Subscript> Modified Carbon Black Microelectrodes

A carbon black microelectrode modified by -MnO₂ has been prepared. The electrocatalytical oxidation of ascorbic acid (AA) at this microelectrode was investigated. The 2nd-order linear scan voltammograms of AA are recorded from –0.5 to 0.5V (vs. SCE). The relationship between the oxidation peak current of AA and its concentration in the range of 1.0×10^–64.0×10^–3molL^–1 is linear. The detection limit (3) was found to be 6.0×10^–7molL^–1. Also, the determination of AA in samples is evaluated, and the results are satisfactory.     

Differential pulse voltammetric determination of arsenic(III,V) and antimony (III,V) in glasses

Summary Analytical methods based on differential pulse voltammetry (DPV) have been described for the determination of total As, As(III), As(V), total Sb and Sb(III) as trace to minor constituents in complex glasses. For total As, the sample is decomposed with HF-H₂SO₄-KMnO₄. The As(V) is chemically reduced to As (III) by hypophosphite and a DPV scan is carried out at the dropping mercury electrode from –0.2 to –0.7 Vvs. SCE (E _p –0.41V). As(V) is determined by decomposing the sample in HF-H₂SO₄ and volatilizing the As(III) as AsF₃. The chemical reduction of As(V) and the DPV scan are then applied. If the glass can be decomposed with cold HF, the As(III) present in the glass can be determined by applying the DPV scan after cold sample-dissolution. For Sb(III), the sample is decomposed with HF-H₂SO₄, diluted, and adjusted to 1M in HCl. A DPV scan is conducted from –0.03 to –0.5 V (E _p –0.15 V). Sb(V) is not reduced in the 1M HCl supporting electrolyte. Total Sb is determined by using an aliquot of the sample solution adjusted to 6M in HCl. The DPV sweep is carried out from –0.5 to –0.1 V [E _p for Sb(V) and Sb(III) is –0.30 V]. The methods have been applied to a wide range of glass compositions and the results compared with values obtained by spectrophotometry and coulometric titration.

---

Bestimmung von Arsen(III, V) und Antimon(III, V) in Gläsern mit Hilfe der Differential-Puls-Voltammetrie

Zusammenfassung Analytische Methoden auf der Grundlage der Differential-Puls-Voltammetrie (DPV) für die Bestimmung des gesamten Arsens, As(III), As(V), des gesamten Antimons und Sb(III) als Spuren in komplexen Gläsern wurden beschrieben. Zwecks Bestimmung des Gesamt-As wird die Probe mit Flußsäure +Schwefelsäure + Permanganat aufgeschlossen. As(V) wird mit Hypophosphit reduziert und die DPV wird an einer Quecksilber-Tropfelektrode zwischen –0,2 und –0,7V gegen eine ges. Kalomelelektrode (E _p =–0,41V) durchgeführt. Zur Bestimmung von As(V) wird die Probe mit HF-H₂SO₄ unter Verflüchtigung des As(III) als AsF₃ aufgeschlossen. Dann erfolgt die Reduktion des As(V) und die DPV. Wenn sich das Glas mit kalter HF lösen läßt, wird anwesendes As(III) mittels DPV in dieser Lösung bestimmt. Zur Bestimmung des Sb(III) wird die Probe mit HF-H₂SO₄ zersetzt, verdünnt und bis zur 1-Molarität mit HCl versetzt. Dann wird mit DPV zwischen –0,03 und –0,5V gemessen (E _p =–0,15V). Sb(V) wird in 1M salzsaurer Lösung nicht reduziert. Das Gesamt-Sb wird in einem Aliquot der Probelösung bestimmt, das dazu mit HCl bis zur 6fachen Molarität versetzt wird. Der DPV-Bereich wird von –0,5 bis –0,1 V ausgenützt (E _p f:ur Sb(V) und Sb(III) ist –0,30 V). Das Verfahren wurde für Gläser verschiedenster Zusammensetzung angewendet. Die Ergebnisse wurden mit den Resultaten der Spektrophotometrie und der coulometrischen Titration verglichen.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

一步法直接合成有机季铵功能修饰的介孔分子筛SBA-15

以P123 嵌段共聚物为模板剂, 3-三甲基丙基氯化铵三甲氧基硅烷(TMAPS)为修饰剂, 酸性条件下一步法直接合成了有机季铵基团功能修饰的SBA-15, 并通过XRD、TEM、N2吸附-脱附、Raman 光谱等对功能化样品的结构和性质进行了表征, 对一步法合成TMAPS 修饰的SBA-15 的可能反应机理进行了探讨. 修饰后的SBA-15 仍然保持了二维六方特征介孔结构, 随着TMAPS负载量的增大, SBA-15 孔道有序度下降, 孔径、孔容和比表面积也随之下降. 有机季铵基团在SBA-15 孔道表面均匀分散, 可与HAuCl4通过快速离子交换制备Au 颗粒高度分散的Au-SBA-15.     

β微管蛋白中紫杉醇(Taxol)结合腔的性质分析

采用多拷贝同时搜寻法(MCSS), 并结合现有微管抑制剂的SAR及3D-QSAR对β微管蛋白中Taxol(紫杉醇)结合腔的性质进行了分析. 结构研究结果表明, Taxol结合腔以疏水性质为主, 并指出官能团分布的具体位置: 在Phe270上方(Leu361-Pro272-Leu273-Leu228之间)的弧形区域、Asp26羧基下方及其与Glu22羧基之间、M-loop的中部, 以及Asp224内侧且靠近Arg276的胍基的位置. 而Asp224的内侧又是新提出的结合位点. 研究结果符合现有微管抑制剂的SAR, 为现有抗肿瘤药物的结构改造以及小分子微管抑制剂设计提供了理论依据.     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.     

[Ce(NO3)5H2O]·(C3H5N2)2的合成、晶体结构及热分析

Colorless crystal, [Ce(NO₃)₅H₂O]·(C₃N₂H₅)₂, has been obtained from the reaction of Ce(NO₃)₃ with imdazole in the aqueous solution and its crystal structure has been determined by single crystal X-ray diffraction techniques.The crystal belongs to triclinic, space group P1. The cell parameters are: a = 0.7489(1) um, b = 0.7914(2) nm, c = 1.8139(3) nm, a = 89.39(2)°, β = 89.37(l) °,γ = 63.18(2)°, Dc = 2.1g·cm^-3, Z = 2, R = 0.0319.In the compound, all of five nitrates are bidentate and one molecule of water is monodentate, the coordination number of Ce (Ⅲ) is 11.The processes of thermal decomposition of the compound was proposed by its TGcurve.     

填料对硅橡胶化学应力松弛的影响

二氧化硅填充的硅橡胶在250—300℃作连续化学应力松弛时相对应力的变化是先衰减到一最低值而后增长。它近似地符合下列式子 f(t)/f(0)=A_1e~(-k_1l+A_2e~(-k_2l)+k_3t+A3f(t)、f(0)分别为t时和起始时的应力。k_1和k_2为应力松弛常数,分别代表与填料相连之链的断裂和胶相断裂的反应速度,k_3为应力增长常数,代表受力链的交联速度。     

Microdetermination of sulfite with a piezoelectric crystal detector

A piezoelectric method is proposed for the determination of sulfite in concentration range 1 × 10^–7–1 × 10^–5 mol/1. The method is based on the redox reaction of sulfite with iodine followed by measuring frequency change of the piezoelectric crystal caused by the unreacted iodine. The method is applied to the determination of sulfite in liquor.     

凝胶-燃烧法合成YAG∶Eu3+纳米荧光材料的结构和发光性能

Y₃Al₅O₁₂∶Eu nanophosphors were synthesized by a gel combustion method. The structure of phosphors was characterized by XRD and FTIR. YAG phase came to occur when YAG∶Eu precursors were sintered at 800 ℃, although the phase was mainly amorphous. The organic groups pyrolyzed completely and pure YAG phase was obtained in the samples sintered at 900 ℃. In the formation of YAG phase, no intermediate phases such as YAP and YAM were detected. Both ⁵D₀ → ⁷F₁ orange and ⁵D₀ → ⁷F₂ red emission could be observed for all the sintered samples. However, the emission of amorphous samples was greatly different from that of crystalline ones. The former was mainly ⁵D₀→ ⁷F₂ red emission, but the latter was ⁵D₀ → ⁷F₁ orange emission. As sintering temperature rises, the ratio of orange to red for phosphors increases. Eu could be doped up to 8% in YAG host lattice, and fluorescence quenching was absent. It indicated that the gel combustion synthesis method can increase emission intensity and quenching concentration due to a good distribution of Eu³⁺ activators in Y₃Al₅O₁₂ matrix.     

Electronic structures of 4d transition metal monoxides by density functional theory

Bond distances, dissociation energies, ionization potentials and electron affinities of 4d transition metal monoxides from YO to CdO and their positive and negative ions were studied by use of density functional methods B3LYP, BLYP, B3PW91, BPW91, B3P86, BP86, SVWN, MPW1PW91 and PBE1PBE. It was found that calculated properties are highly dependent on the functionals employed, especially for dissociation energy. For most neutral species, pure density functionals BLYP, BPW91 and BP86 have good performance in predicting dissociation energy than hybrid density functionals B3LYP, B3PW91 and B3P86. In addition, BLYP gives the largest bond distance compared with other density functional methods, while SVWN gives shortest bond distance, largest dissociation energy and electron affinity. For the ground state, the spin multiplicity of the charged species can be obtained by ± 1 of their corresponding neutral species.