毛细管区带电泳技术快速分离检测爆炸残留物中的无机离子

利用间接紫外毛细管区带电泳方法完成了对爆炸残留物中7种无机离子(K+,NH+4,NO-2,NO-3,SO2-4,ClO-3,ClO-4)的分离检测。阳离子测定采用的缓冲体系为10 mmol/L吡啶（pH 4.5）-3 mmol/L冠醚,K+和NH+4在2.6 min内达到基线分离,检出限分别为0.25 mg/L和0.10 mg/L(S/N=3)。阴离子测定采用的缓冲体系为40 mmol/L硼酸-1.8 mmol/L重铬酸钾-2 mmol/L硼酸钠（pH 8.6）,氢氧化四甲铵为电渗流改性剂,5种阴离子在4.6 min内达到基线分离,检出限为0.10～1.85 mg/L。该方法已成功地应用于实际爆炸物样品种类的判定分析,取得了很好的结果。     

Preparation and properties of amino-terminated anionic waterborne-polyurethane-silica hybrid materials through a sol-gel process in the absence of an external catalyst

A series of polymer-silica hybrid materials consisting of amino-terminated anionic waterborne-polyurethane (WPU) and inorganic silica particles have been prepared through a sol-gel process in the absence of an external catalyst. Typically, amino-terminated anionic WPU was first synthesized from polycaprolactone, dimethylol propionic acid, and 4,4′-methylenebis(cyclohexyl isocyanate) with specific molar ratios, followed by further reaction with triethylamine and triethylene tetramine to give as-prepared WPU. The WPU obtained was characterized by FTIR spectroscopy and gel permeation chromatography. Subsequently, a series of hybrid materials with different silica contents were prepared by performing sol-gel reactions with tetraethyl orthosilicate (TEOS) in an amino-terminated WPU matrix without the addition of an external catalyst. This was followed by examination by transmission electron microscopy and ²⁹Si solid-state NMR. The terminated primary amine groups attached to the as-prepared WPU chains functioned as an internal base catalyst for the sol-gel process of TEOS. The effect of composition on the thermal stability, mechanical strength, surface wettability, and optical clarity of the hybrid materials was evaluated by the thermogravimetric analysis, dynamic mechanical analysis, contact angle measurement, and UV-visible transmission spectroscopy, respectively.     

Two-photon spectroscopic behaviors and photodynamic effect on the BEL-7402 cancer cells of the new chlorophyll photosensitizer

The spectroscopic properties of a new chlorophyll derivate photosensitizer(CDP) are studied under the excitation wavelengths at 800 and 400 nm using femtosecond pulses from a Ti:sapphire laser.The damaging effect of CDP on the BEL-7402 cancer cells is also investigated upon two-photon illumination at 800 nm.The normalized fluorescence spectra of CDP in tetrahydrofuran(THF) show that two-photon and one-photon spectra have the same distributions and the same emission bands(675 nm).The life-times of two-and one-photon induced fluorescence of this molecule are of the order of 5.0 ns.By comparing the data it is shown that there is some difference between the two lifetimes,but the differ-ence is less than one nanosecond.The two-photon absorption cross section of the molecule is also measured at 800 nm and estimated as about σ′2 ≈ 31.5×10-50 cm4·s·photon-1.The results of two-photon photodynamic therapy(TPPDT) tests show that CDP can kill all of the tested cancer cells according to the usual Eosine assessment.Our results indicate that the two-photon-induced photophysical,photo-chemical and photosensitizing processes of CDP may be basically similar to those of one-photon ex-citation.These behaviors of the sample suggest that one may find other possible methods to estimate some photosensitizers' effects in details such as their distribution in cells and the reactive targets of the sub-cellular parts of some tumor cells via two-photon excitation techniques.     

Regiochemistry in radical cyclization of allenes

The cyclization of allenic radicals was systematically studied for the first time by computational methods. It was found that the theoretical results at the ONIOM(QCISD(T)/6-311+G(2df,2p):UB3LYP/6-311+G(2df,2p)) level were in good agreement with all the available experimental data. For the cyclization of penta-3,4-dien-1-yl radicals the major product was penta-1,2-diene from direct reduction whereas a small amount of vinylcyclopropane may also be produced. For the cyclization of hexa-4,5-dien-1-yl radicals the major product is 1-methyl-cyclopentene. Furthermore, for the cyclization of hepta-5,6-dien-1-yl radicals both vinylcyclopentane and 1-methyl-cyclohexene are produced. Marcus theory analysis indicated that the formation of an olefinic radical product always had a lower intrinsic energy barrier than the formation of an allylic radical product. On the other hand, the formation of an olefinic radical product was always much less favorable than the formation of an allylic radical product in the thermodynamic term. For the cyclization of substituted hexa-4,5-dien-1-yl radicals, substitution at the allene moiety does not affect the regioselectivity where the allylic radical product is always favored. For the cyclization of hepta-5,6-dien-1-yl radicals, substitution at the allene moiety dramatically affects the regioselectivity, where some radical-stabilizing groups such as -CN and -COMe may even completely reserve the regioselectivity.     

金刚石衬底上GaN HEMT沟道温度建模:各向异性且非均匀热导率的影响

为了改善GaN HEMT的自热效应,集成高热导率的金刚石衬底有助于增强器件有源区的热量耗散。然而,化学气相淀积(CVD)生长的多晶金刚石(PCD)具有柱状晶粒结构,导致了各向异性的材料热导率,且其热导率值与生长厚度有关。为此,通过建模金刚石生长过程中晶粒尺寸的演变过程,计算了金刚石沿面内和截面方向的热导率。基于该PCD热导率模型,利用计入材料非线性热导率的GaN器件热阻解析模型,计算得到了GaN HEMT沟道温度的波动范围,并分析了其与器件结构(栅长、栅宽、栅间距、衬底厚度)和功耗的依赖关系。最后,通过与有限元(FEM)仿真结果对比,分区域提取了GaN HEMT器件中PCD衬底的有效热导率,分别为260~310 W/(m·K)和1 250~1 450 W/(m·K)。本文的计算为预测金刚石衬底上GaN HEMT器件的沟道温度提供了快速、有效的方法。     

K0超固结土的不排水抗剪强度

结合K0超固结上模型、旋转角w公式、临界状态不排水条件以及基于SMP的变换应力张量建立了不排水抗剪强度的统一表达式;采用三轴压缩、三轴拉伸的应力洛德角θ、旋转角w建立了三轴压缩、三轴拉伸条件下的不排水抗剪强度公式;基于临界状态士力学,推导出了平面应变条件下的应力洛德角θ、旋转角w的表达式,进而得到平面应变条件下的不排水抗剪强度公式.分别采用三轴压缩、三轴拉伸和平面应变条件下试验数据对所提出的不排水抗剪强度公式进行验证,预测结果和试验数据的基本吻合表明了不排水抗剪强度公式的合理性.     

不同倾角预制裂纹缺陷与运动裂纹的相互作用

为了研究运动裂纹与不同倾角预制裂纹缺陷之间的作用机制,采用数字激光动态焦散线方法对含不同倾角预制裂纹缺陷的三点弯曲梁进行冲击实验。研究结果表明,在冲击载荷作用下,预制裂纹缺陷尖端均产生了次生裂纹;当运动主裂纹与预制裂纹缺陷贯通时,次生裂纹不会立即起裂,而是经过0~10 μs的能量积蓄后,次生裂纹才起裂;运动主裂纹应力强度因子峰值与次裂纹起裂时的应力强度因子值均随预制裂纹倾角的增大而增大。     

Loading rate and confining pressure effect on dilatancy,acoustic emission,and failure characteristics of fissured rock with two pre-existing flaws

Investigating the dilatancy, acoustic emission and failure characteristics of fissured rock are significant to ensure their geotechnical stability. In this paper, the uniaxial and triaxial compression experiments with AE monitoring under different loading rates were carried out on fissured rock specimens with the same geometrical distribution of two pre-existing flaws. The dilatancy and AE activity of these specimens were discussed, and the effects of the confining pressure and loading rate on the mechanical parameters and failure characteristics were analyzed. The results show that the exponential strength criterion is more suitable than the Mohr–Coulomb strength criterion to characterize the strength characteristics of fissured rock. The crack evolution and failure characteristics of fissured rock specimens are more complicated than those of intact rock specimens. The failure characteristics of the fissured rock follow the tensile shear coalescence model, crack branching occurs with increasing the loading rate, and the multi-section coalescence model is verified with increasing the confining pressure. The phenomena of stress drop and yield platform usually occur after the dilatancy onset, the specimen does not fail instantaneously, and the propagation and coalescence of cracks cause a sharp increase in the AE signals, circumferential strain, and volumetric strain.     

Preparation of coatings from a series of silicone/fluorine‐functionalized polyacrylates via electrophoretic deposition

Silicone/fluorine‐functionalized polyacrylates were synthesized and subsequently used to prepare corrosion‐resistant transparent coatings via electrophoretic deposition. The coated tin plate with the functionalized polyacrylate had a gloss value higher than 95.0 GU and resisted rust after immersion in a 5 wt% NaCl solution for 10 days. In addition, these coatings remained adhered strongly to the tin plates even after they were bent. It is hoped that this work will provide useful experimental data and assist researchers with the design of applicable coatings with desirable properties. Copyright © 2015 John Wiley & Sons, Ltd.