Heat transfer characterization and improvement in an external catalyst cooler fluidized bed

Gas-solid fluidized beds have been widely used in heat transfer processes,and so there have been many studies focused on increasing heat transfer in such units....     

Biotemplated Fabrication of ZnO Microstructures with Enhanced Photocatalytic Properties from Rape Pollen

Crystallography Reports - Sodium dodecyl sulfonate and rape pollen were selected as soft and hard templates to induce ZnO formation under hydrothermal conditions, respectively. In the preparation...     

Adaptive neural network consensus tracking control for uncertain multi-agent systems with predefined accuracy

Nonlinear Dynamics - This paper proposes the consensus tracking control problem for a class of uncertain nonlinear multi-agent systems. By using a group of nonnegative functions, an adaptive neural...     

液-液-液微萃取-高效液相色谱法测定人血浆中的局部麻醉剂

建立了液-液-液微萃取与高效液相色谱联用技术同时测定人血浆中3种局部麻醉剂利多卡因、布比卡因和丁卡因的方法。考察了萃取时间、料液pH值和搅拌速度的影响,取佳萃取条件为萃取溶剂为200μL苯,接受相为1.0μL 0.2 mol/L HC l,搅拌速度为250 r/m in,萃取时间为45 m in。在该条件下,获得了高的富集因子(大于305倍)。方法的线性范围为:利多卡因和布比卡因0.025~5 mg/L,丁卡因0.05~5 mg/L,相关系数大于0.996;检出限依次为0.005、0.015和0.025 mg/L;相对标准偏差小于5%。该方法能有效地去除血浆中复杂基体的干扰,萃取效率高,有机溶剂消耗少,是一种有效、灵敏的同时测定血浆中利多卡因、布比卡因和丁卡因的方法。     

氦在铝表面辐照和积聚的团簇动力学模拟

我们利用团簇动力学模型(IRadMat)研究了keV-He离子辐照金属铝的缺陷动力学和氦的聚集行为.通过对不同俘获类型(团簇、晶界和位错)俘获He浓度的定量分析,我们发现大多数He原子被晶界吸收,这成为铝在低辐照通量下发生脆化的主要原因.随着辐照能量的增加,He滞留峰的位置会变得更深.然而,随着辐照通量的增加,He在体内的滞留量会变得更多,但滞留深度的峰值位置不变.我们的结果表明,晶界的影响在He的滞留分布以及铝的脆化行为中起着关键作用,这也有助于我们理解He在金属中的动力学行为和损伤的分布.     

Fast Liquid Phase Epitaxial Growth for Perovskite Single Crystals

Semiconductors grown by the solution-processed method have shown low-cost,facile fabrication process and comparable performance.However,there are many reasons why it is difficult to achieve high quality films.For example,lattice constant mismatch is one of the problems when photovoltaic devices made of organ metallic perovskites.In this work,MAPbBr^{MA=CH3NH3^+}perovskites single crystals grown on the surface of MAPbBr2.5 CI0.5 perovskites single crystals via liquid epitaxial growth method is demonstrated.It is found that when the lattice constants of the two perovskite single crystals are matched,another crystal can be grown on the surface of one crystal by epitaxial growth.The whole epitaxy growth process does not require high heating temperature and long heating time.X-ray diffraction method is used to prove the lattice plane of the substrate and the epitaxial grown layer.A scanning electron microscope is used to measure the thickness of the epitaxial layer.Compared with perovskite-based photodetectors without epitaxial growth layer,perovskite-based photodetectors with epitaxial growth layer have lower dark current density and higher optical responsibility.     

分光技术在自由电子激光结合里德堡态氢原子飞行时间谱装置中的应用

本文描述了一种应用于自由电子激光结合高里德堡态氢原子飞行时间谱装置中的分光方法,以及该方法应用于小分子(如₂S)光解动力学研究中的必要性. 拉曼-α辐射(121.6 nm),用作H原子产物探测的激光,是在Kr/Ar气介质中利用四波混频产生的. 利用透镜对不同波长的光有不同的折射率,四波混频后的混合光在经过一片离轴的氟化锂透镜后,121.6 nm的激光将会与212.6和845 nm在空间上分开. 在激光到达反应中心前利用挡板挡住212.6和845 nm的激光,只让121.6 nm的光经过反应中心,从而消除212.6 nm激光产生的背景信号对实验的干扰. 结合自由电子激光,成功地研究了H₂S在122.95 nm波长下的光解动力学,采集到了产物时间飞行谱. 本文展示了转换得到的产物总平动能谱,解离机理与121.6 nm波长下的结果相似. 实验结果显示,该方法成功地解决了分子在VUV波段进行光解动力学研究的难题,消除了这些分子在紫外光波段因为强烈吸收而产生的背景信号.     

?4模型真空态间的转换算符

本工作在正则量子化的基础上,对$\phi^4$模型的哈密顿量采取正规序来正规化真空零点能,然后微扰计算了至次领头阶的真空态修正。同时首次得到可以在$\phi^4$模型的两个真空态之间转换的算符,我们相信这个算符也是适当极限条件下产生$\phi^4$扭结(kink)的算符的形式。最后简要说明了真空能的应用。     

Aerial Video Trackers Review

Target tracking technology that is based on aerial videos is widely used in many fields; however, this technology has challenges, such as image jitter, target blur, high data dimensionality, and large changes in the target scale. In this paper, the research status of aerial video tracking and the characteristics, background complexity and tracking diversity of aerial video targets are summarized. Based on the findings, the key technologies that are related to tracking are elaborated according to the target type, number of targets and applicable scene system. The tracking algorithms are classified according to the type of target, and the target tracking algorithms that are based on deep learning are classified according to the network structure. Commonly used aerial photography datasets are described, and the accuracies of commonly used target tracking methods are evaluated in an aerial photography dataset, namely, UAV123, and a long-video dataset, namely, UAV20L. Potential problems are discussed, and possible future research directions and corresponding development trends in this field are analyzed and summarized.     

Theoretical investigation of the crystallographic structure,anisotropic elastic response,and electronic properties of the major borides in Ni-based superalloys

ABSTRACT

In Ni-based superalloys, it is usually found that borides can strengthen the grain boundaries, thereby resulting in an increase in mechanical strength and high-temperature creep properties. Due to their importance and prevalence in Ni-based superalloys, this study employs first-principles methods to investigate the crystallographic structure, anisotropic elastic response, and electronic properties of the major borides, such as M₂B, M₅B₃ and M₃B₂ (M: Cr, Mo, W), respectively, which is necessary for the assessment of complex mechanical responses of Ni-based superalloys. The results demonstrate that the studied borides are all thermodynamically and mechanically stable. Among the M _x B _y binary borides analysed, Cr _x B _y exhibits the largest shear modulus, Young’s modulus, and Vicker hardness values, and these properties increase with the increase of B contents. The studied borides display nearly isotropic elastic properties except for W₅B₃ and W₃B₂. The electronic structure analysis of M _x B _y shows that the strong hybridisation between M-d and B-p orbitals leads to these borides exhibiting higher theoretical hardness, and the overlapping peaks of M-d and B-p orbitals move to a lower energy area with the increase of B contents, which leads to the increase of shear and Young’s moduli of M _x B _y . Furthermore, for M₃B₂ borides, the Cr-B bonds and Cr–Cr bonds are much stronger than the W-B & Mo-B bonds, and W-W & Mo-Mo bonds, respectively, which leads to Cr _x B _y yielding the largest values of elastic moduli.