Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

Synthesis and characterization of linear high molecular weight poly(amino-s-triazine)s

A two-phase polycondensation reaction was used to prepare high molecular weight linear poly-(amino-s-triazine)s from aminodichloro-s-triazines and diamines. These polymers contain a high concentration of melamine-type units in the polymer backbone. Molded specimens exhibited good mechanical properties and resistance to organic solvents. Dimethyl substitution at the exocyclic amino group led to a significant reduction in indentation resistance, strength, and modulus.     

Guest sorption and desorption in the metal-organic framework [Co(INA)(2)] (INA=isonicotinate)--evidence of intermediate phases during desorption

The metal-organic framework [Co(INA)(2)]x0.5EtOH (INA = isonicotinate, NC(5)H(4)-4-CO(2)(-)), was synthesised under solvothermal conditions. Its X-ray crystal structure shows channels containing ethanol guests which are hydrogen-bonded to carboxylate oxygens of the framework. The pyridyl rings of the framework alternate between 'open' and 'closed' positions along the channels resulting in large variation in the channel cross-sectional area from ca. 1.4 by 2.3 A at the narrowest point to 4.9 by 5.3 A at the widest. Despite the very small windows, the ethanol guests (of van der Waals diameter ca. 4.2-6.1 A) may be reversibly desorbed and sorbed into the structure quantitatively, as shown by in situ variable-temperture IR spectroscopy and XRPD. The single-crystal structure of the desolvated form [Co(INA)(2)] shows that there is no change in the overall connectivity on desolvation, but the rotational positions of the pyridine rings are altered. This suggests that pyridyl rotation may occur to allow guests to pass in and out. When the synthesis was conducted in 1-propanol solvent [Co(INA)(2)]x0.5Pr(n)OHxH(2)O, was obtained, and a single-crystal X-ray structure revealed the same overall connectivity as in but with pyridine rings disordered over closed and open positions. There was no evidence of included guests from X-ray crystallography, suggesting that they are also highly disordered. Variable-temperature XRPD performed on bulk samples showed peaks which were unsymmetrical and exhibited shoulders, suggesting that for each pattern obtained the material actually consisted of several closely-related phases. The movements of the peaks during desolvation showed the presence of intermediate phases before the final desolvated product was formed. The peak positions of the intermediate phases matched more closely with the calculated pattern for than with or, suggesting that they may have disordered structures similar to. The results also suggest that the intermediate phase represents an initial increase in volume before a larger decrease in volume occurs to give the final desolvated material.     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

Swelling and network parameters of crosslinked thermoreversible hydrogels of poly(N-ethylacrylamide)

Samples of Poly(N-ethylacrylamide) (PEA) have been synthesized by free radical polymerization in water using N,N′-methylene bis-acrylamide (BIS) as crosslinker. Hydrogels obtained by swelling them in water, 15 wt% KCl and 1 wt% sodium dodecyl sulphate (SDS) were examined by gravimetric, dimensional and compression-strain measurements to afford values of swelling ratio, polymer-solvent interaction parameters, elastic moduli and effective crosslinking density ν_e. Crosslinking inefficiency is evidenced by the low value (0.23) of ν_e relative to the theoretical crosslinking density ν_t based on the content of BIS in the synthesis. A small but finite extrapolated value of ν_e at ν_t = 0 is indicative of hydrophobic physical interactions. In water at 298 K increasing the content of BIS leads to a decrease in swelling and increases in values of elastic moduli and polymer-water interaction parameter. At a fixed content of BIS the values of ν_e and the elastic moduli exhibit an unusual increase with temperature, the crosslinking thus being thermally reversible. It is proposed that this results from a balance between hydrophobic interaction and breakage of hydrophilic hydrogen bonding. Although KCl in the medium decreases the swelling compared with that in water, the opposite effect occurs on incorporation of SDS, which is assumed to confer some polyelectrolyte character to the PEA chains. The finding, that these two swelling media reduce the values of ν_e and elastic moduli cf the value in water, has not been resolved satisfactorily.     

毛细管电泳法研究提取剂对黄连-黄柏共煎剂中生物碱含量的影响

用毛细管电泳法,对黄连与黄柏配伍后共煎剂中的主要生物碱进行了分析。以50 mmol/L Na2B4O7(pH=7)-CH3OH(85:15,V/V)为背景电解质,操作电压为14 kV,电迁移进样10 kV×5s,柱上223 nm检测,5种主要生物碱9 min内可在50 cm×75μm毛细管上实现基线分离。以小檗碱、巴马汀的提取量为指标,分析了提取剂对提取效果的影响。以30％的乙醇水溶液为提取剂,可得到最大煎出量。     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Lanthanide nitrate complexes with 2-azacyclononanone

Thermal behavior of rare earth nitrate complexes with 2-azacyclononanone (AZA) with Ln(NO₃)₃·3(AZA) composition (where Ln=Gd, Er and Ho) was analyzed in kinetic point of view. Kinetic parameters were calculated from thermogravimetric data. All obtained results were similar. The first decomposition step was representative to the loss of ligand and the residue was essentially Ln₂O₃. Furthermore, a reaction path was proposed for the thermal decomposition of the Ln(NO₃)₃·3(AZA).