The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

ⅡB型LBO光参量振荡器

二极管泵浦的Nd:YAG激光器美国加州圣克拉拉的Continuum公司推出的HPO-300型高功率二极管泵浦Nd:YAG激光器,在1064nm波长输出3mJ.该激光器重复率在1～300Hz可产生接近衍射极限的脉冲。     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

金催化化学发光新体系——苯并吡喃化学发光分析法测定金矿中的痕量金

本文提出了一种测定矿样中痕量金的化学发光分析法,氯化6,7-二羟基-2,4-二甲基苯并吡喃-H_2O_2化学发光体系,方法的检出限为7ppb。工作曲线线性范围是10～1000ppbAu,测定的相对标准偏差小于7％。应用本法测定矿样中的金,结果良好。     

Magnetically rotational reactor for absorbing benzene emissions by ionic liquids

A magnetically rotational reactor （MRR） has been developed and used in absorbing benzene emissions. The MRR has a permanent magnet core and uses magnetic ionic liquid [bmim]FeCl4 as absorbent. Benzene emissions were carried by N2 into the MRR and were absorbed by the magnetic ionic liquid. The rotation of the permanent magnet core provided impetus for the agitation of the magnetic ionic liquid, enhancing mass transfer and making benzene better dispersed in the absorbent. 0.68 g benzene emissions could be absorbed by a gram of [bmim]FeCl4, 0.27 and 0.40 g/g higher than that by [bmim]PF6 and [bmim]BF4, respectively. The absorption rate increased with increasing rotation rate of the permanent magnet.     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.     

抗红外成像制导技术浅析

红外成像制导导弹自诞生以来 ,经过数十年的发展 ,技术日臻完善 ,应用日趋广泛 ,研究和探讨对抗红外成像制导的技术和方法就显得尤为重要。介绍了红外成像制导的基本原理、发展和在战争中的重要作用 ,重点探讨了对抗红外成像制导的几种技术手段。