Anisotropic Superconducting Properties of Kagome Metal CsV_3Sb_5

We systematically measure the superconducting(SC) and mixed state properties of high-quality CsV_3 Sb_5 single crystals with T_c～3.5 K.We find that the upper critical field H_(c2)(T) exhibits a large anisotropic ratio of H_(c2)~(ab)/H_(c2)~c～9 at zero temperature and fitting its temperature dependence requires a minimum two-band effective model.Moreover,the ratio of the lower critical field,H_(c1)~(ab)/H_(c1)~c,is also found to be larger than 1,which indicates that the in-plane energy dispersion is strongly renormalized near Fermi energy.Both H_(c1)(T) and SC diamagnetic signal are found to change little initially below T_c～3.5 K and then to increase abruptly upon cooling to a characteristic temperature of ～2.8 K.Furthermore,we identify a two-fold anisotropy of in-plane angular-dependent magnetoresistance in the mixed state.Interestingly,we find that,below the same characteristic T～2.8 K,the orientation of this two-fold anisotropy displays a peculiar twist by an angle of 60° characteristic of the Kagome geometry.Our results suggest an intriguing superconducting state emerging in the complex environment of Kagome lattice,which,at least,is partially driven by electron-electron correlation.     

A 20.8-Gbps Dual-Carrier Wireless Communication Link in 220-GHz Band

With the successful demonstration of terahertz (THz) high-speed wireless data transmission,the THz frequencies are now becoming a worth candidate for post-5G wi...     

反应物量对纳米晶Fe_3Al组织和性能的影响

利用铝热反应熔化方法分别在反应物量为50、100、200g的条件下制备了块体纳米晶Fe3Al材料,通过TEM和XRD研究了材料的晶粒尺寸,并研究了材料室温压缩性能和硬度。结果表明,所制备的材料主要由非晶和纳米晶组织组成,当反应物量增大,部分区域甚至出现微米晶组织。反应物量为50g时Fe3Al材料中非晶较多,不存在微米晶;反应物量为100g时主要以纳米晶为主,非晶数量减少,伴随有少量的微米晶出现;反应物量为200g时,材料以纳米晶为主,微米晶数量较100g时有所增加。随着反应物量的增加,纳米晶相的平均晶粒尺寸增加,屈服强度和硬度呈先增大后减小的趋势。     

8～12μm波段折/反/衍混合坦克扫描物镜消热差设计

根据坦克扫描光学系统的要求,设计了一种工作于8～12μm波段,可识别2 000 m远坦克目标的折/反/衍射混合红外消热差光学系统。该系统采用新型的卡塞格林系统,其非球面主镜和次镜全部取代为球面,解决了卡塞格林系统大口径非球面主镜、次镜的高加工精度和装调难的问题;通过应用衍射元件独特的温度特性实现红外光学系统的无热化设计,设计的系统结构简单紧凑,口径大、焦距长、分辨率高,并且在-40～60℃的温度范围内成像质量接近衍射极限,满足坦克扫描系统的总体要求和像质要求。     

The Relationship Between R&D Investment and Firm Profitability Under a Three-Stage Sigmoid Curve Model: Evidence From an Emerging Economy

The relationship between investment in research and development (R&D) and firm performance has been the subject of numerous academic investigations, but the findings of these investigations have varied greatly, with research revealing a number of different patterns in the R&D–performance relationship. This inconsistency may be partly attributable to the failure of the commonly used linear modeling method to capture the full dynamics of the R&D–performance relationship. Based on the sigmoid (S) curve paradigm, as well as on other economic foundations, this study proposes the use of a three-stage S-curve model to help reconcile the disparities in the literature. This S-curve model shows that the relationship between R&D intensity and firm profitability is nonlinear, with the slope negative at low levels (stage 1), positive at medium levels (stage 2), and negative again at high levels of R&D investment (stage 3). Empirical evidence from a sample of 377 publicly listed Taiwanese high-tech manufacturing firms and 179 nonhigh-tech firms, examined during the period between 2000 and 2007, confirmed our proposed model. This study not only establishes a relationship pattern that differs from that shown in past studies, but also has important managerial implications for R&D managers and important policy implications for governments.      

新型Sb基二类超晶格红外探测器

InAs/Ga(In)SbⅡ类超晶格材料由于特殊的二型能带结构,可以通过人造低维结构获得类似于体材料的带间吸收,从而获得较高的量子效率;另外,通过调节材料参数调节能带结构,器件响应波段可调;通过能带结构设计抑制俄歇复合,获得较小的暗电流和较高的器件性能。因为以上特有的材料性能和器件特性,Sb基二类超晶格在国际上被认为是第三代红外焦平面探测器的优选材料。对二类超晶格材料的设计和器件特性进行了研究,设计了峰值波长4μm的nBn结构的中波红外探测器,在没有蒸镀抗反膜的条件下,77 K温度下测试得到的峰值探测率为2.4×1011cm Hz1/2W-1,计算得到的量子效率为47.8%,峰值探测率已经接近目前的碲镉汞中波红外探测器器件性能。研究结果充分显示了二类超晶格优越的材料和器件性能。     

JPM-I移动交换机呼叫处理子系统的实现研究

主要介绍ＪＰＭ－Ｉ　ＭＳＣ／ＶＬＲ移动交换机的呼叫处理系统的结构、功能描述。     

通信电源设计中创新思想的探讨

在分析创新思想在通信电源设计中的意义和重要作用的基础上,通过5个应用案例阐述了创新思想在通信电源设计中的应用。     

Transition-metal-free synthesis of 1,4-benzoxazepines via [4+3]-cycloaddition of para-quinone methides with azaoxyallyl cations

A formal[4+3]-cycloaddition reaction of ortho-hydroxyphenyl-substituted para-quinone methides(p-QMs)with in-situ generated azaoxyallyl cations is reported.The reaction occurs under very mild reaction conditions(transition-metal free,room temperature,cheap inorganic base)and provides a very efficient route to a series of biologically important 1,4-benzoxazepine derivatives in good to excellent yields.