ICP-AES法测定茶叶中As,Cd,Ni,Pb等元素的含量

目的对样品前处理、酸度及茶叶中共存元素干扰的影响等因素进行探讨,方法用微波消解前处理样品,ICP-AES法同时测定茶叶中铅(Pb)、砷(As)、镉(Cd)、镍(Ni)等元素含量。结果该法的回收率在84.5%～115%之间,精密度RSD均小于9%,结论该法能满足茶叶测定要求。     

应用ICP-MS测定市售红葡萄酒中重金属元素的含量

目的随着对葡萄酒功效的认识,它逐渐成为普通人喜欢的饮品,所以对葡萄酒中各种成分的研究也成了热点。方法借助先进的ICP-MS技术对4种葡萄酒中的各种重金属和微量元素进行测定。结果金属元素质量浓度由高到低顺序为:As,Cr,Pb,Cd,As最高不超过0.5μg.mL-1,结论符合国家食品卫生标准。     

3位间接连接有叔胺(仲胺)氮原子的3-季碳氧化吲哚化合物的合成

以3-卤氧化吲哚为起始原料,1,8-二氮杂二环十一碳-7-烯为催化剂,在二氯甲烷中与1-甲基吲哚经取代反应,或在甲苯溶液中于120 ℃条件下与吲哚（吲哚苯环上可连接有取代基）直接发生取代反应,合成了7个3位间接连接有叔胺（仲胺）氮原子的3-季碳氧化吲哚化合物,收率分别为80%~89%和 53%~70%,其结构经¹H NMR, ¹³C NMR和HR-MS（ESI-TOF）表征。     

Reductive Amination of Carbonyl Compounds with Ammonia and Hydrogenation of Nitriles to Primary Amines with Heterogeneous Cobalt Catalysts

Reductive amination of aldehydes/ketones with aqueous NH3 and hydrogenation of nitriles to primary amines with Co catalysts were reported. Co@NC-700 exhibited remarkable activity and high selectivity for the reductive amination of aldehydes/ketones with aqueous NH3 and the hydrogenation of nitriles to primary amines. Several primary amines can be obtained with good to excellent yields via the reductive amination of aldehydes/ketones and the hydrogenation of nitriles. The nitrogen-doped carbon(C)-supported Co@NC-700 metal catalyst was prepared via the pyrolysis of bioMOF Co/adenine in activated C. Co@NC-700 can be reused five times without evident loss of activity.     

Adsorption of thorium(IV) from aqueous solutions by poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres

Journal of Radioanalytical and Nuclear Chemistry - Poly(cyclotriphosphazene-co-4,4′-diaminodiphenyl ether) microspheres (PZA) was based on hexachlorocyclotriphosphazene (HCCP) and...     

Fluorene‐based Lanthanide Coordination Polymer: Structure,Luminescence and Sensing of Picric Acid

Luminescent coordination polymers can be potential chemosensors and extensive efforts are being devoted to improve their selectivity and sensitivity. In this work, we report a new kind of fluorene‐based Tb‐CP, Tb₄L₆·7DMF·5H₂O ( Tb ₄ L ₆ , H₂L = 4,4′‐(9,9‐dimethyl‐9H‐fluorene‐2,7‐diyl)dibenzoic acid), showing 2D network and strong blue emission. Meanwhile, Tb ₄ L ₆ exhibits excellent selectivity and sensitivity for picric acid (PA). The quenching constant (K_sv) of Tb ₄ L ₆ is equal to 4.5 × 10⁴ L/mol during the concentration range of 0–30 μmol/L, which approaches the best reported CPs‐based on PA sensor up to now. Moreover, we went into depth on the possible mechanisms of luminescence quenching.     

一种超支化阳离子聚合物的制备及其防膨性能

以顺丁烯二酸酐及二乙醇胺为原料，采用“一步熔融法”合成了端羟基超支化聚酯酰胺（HBP-OH）；以环氧氯丙烷改性HBP-OH制得端基为氯甲基的超支化聚酯酰胺（HBP-ECH）；以三乙胺改性HBP-ECH制得端基为季铵基的超支化聚酯酰胺（HBP-L），其结构经IR表征。研究了HBP-L的静态防膨率、耐水洗能力及对岩心的渗透伤害率。结果表明：HBP-L加量为1 wt%时，粘土防膨率为90.36%；经10次水洗后，其防膨率仍超过85%；模拟地层温度为45 ℃时，HBP-L对岩心的渗透伤害率仅3.86%。采用XRD和Zeta电位法分析了HBP-L对粘土水化膨胀及运移分散的抑制机理。结果表明：经1 wt%HBP-L处理的粘土，其晶层间距为6.91 nm，较去离子水处理层间距（4.71 nm）小；粘土表面的zeta电位由-39.2 mV升高至-19.6 mV。     

以天然矿物为全部硅铝源低成本绿色合成ZSM-5分子筛的研究

ZSM-5分子筛被广泛地应用于催化、吸附分离、离子交换和绿色化工等领域,但目前其合成主要是以无机化学品为硅铝源,从源头来看是非绿色化的过程.我们以热活化的硅藻土和亚熔盐活化的累托土为全部硅铝源,通过调变两种矿物的加入比例调变合成体系的硅铝比,在水热合成体系中制备ZSM-5分子筛.系统地考察模板剂用量、碱度、投料硅铝比、晶化时间等合成条件对产物结构和性质的影响,并对在最优条件下合成的ZSM-5分子筛的物化性质进行了详细地表征,结果表明：以天然矿物为全部硅铝源可以合成出具有较高结晶度、晶粒尺寸约为4 μm的六面体挛晶形貌的ZSM-5分子筛,该分子筛比商业ZSM-5分子筛具有更高的水热稳定性和更优的加氢异构性能.     

Facile Generation of Polymer–Alloy Hybrid Layers for Dendrite‐Free Lithium‐Metal Anodes with Improved Moisture Stability

Lithium‐metal anodes are recognized as the most promising next‐generation anodes for high‐energy‐storage batteries. However, lithium dendrites lead to irreversible capacity decay in lithium‐metal batteries (LMBs). Besides, the strict assembly‐environment conditions of LMBs are regarded as a challenge for practical applications. In this study, a workable lithium‐metal anode with an artificial hybrid layer composed of a polymer and an alloy was designed and prepared by a simple chemical‐modification strategy. Treated lithium anodes remained dendrite‐free for over 1000 h in a Li–Li symmetric cell and exhibited outstanding cycle performance in high‐areal‐loading Li–S and Li–LiFePO₄ full cells. Moreover, the treated lithium showed improved moisture stability that benefits from the hydrophobicity of the polymer, thus retaining good electrochemical performance after exposure to humid air.     

Synthesis of Indoles through Domino Reactions of 2‐Fluorotoluenes and Nitriles

Indoles are essential heterocycles in medicinal chemistry, and therefore, novel and efficient approaches to their synthesis are in high demand. Among indoles, 2‐aryl indoles have been described as privileged scaffolds. Advanced herein is a straightforward, practical, and transition‐metal‐free assembly of 2‐aryl indoles. Simply combining readily available 2‐fluorotoluenes, nitriles, LiN(SiMe₃)₂, and CsF enables the generation of a diverse array of indoles (38 examples, 48–92 % yield). A range of substituents can be introduced into each position of the indole backbone (C4 to C7, and aryl groups at C2), providing handles for further elaboration.