长脉冲keV X射线源的辐射特征

利用神光Ⅱ第九路2 ns长脉冲激光束作用厚钛固体靶,研究了产生的keV X射线源的辐射区域和总辐射功率的时间行为。结果表明：在长脉冲激光作用厚固体靶时,硬X射线线辐射功率的时间行为以及辐射体积的时间行为与激光脉冲波形一致;长脉冲时,等离子体2维膨胀效应非常显著,keV X射线线辐射的径向辐射区域在激光焦斑尺寸附近达到饱和,导致X射线线辐射功率出现饱和,且keV X射线线辐射的辐射体积正比于焦斑尺寸的3次方。从理论和实验角度研究了在同样入射激光能量下,辐射功率随激光焦斑尺寸的变化关系,发现keV X射线线辐射的饱和辐射功率正比于焦斑尺寸的5/3次方,理论结果与实验结果一致。并讨论了相同基频输出激光能量下,keV X射线辐射总功率随激光波长的变化关系,发现即使考虑了倍频效率的影响,短波长激光仍然有利于keV X射线的发射。     

250 kV，1 MHz重复率方波三脉冲源

阐述了一种新的实现高功率高重复率方波脉冲源的技术途径,利用高压快恢复整流硅堆把三个独立的方波脉冲合成为一个MHz重复率的方波三脉冲。通过合理的串并联设计,可以提高硅堆在高频脉冲下的反向耐压,并使硅堆通过的正向脉冲电流达到kA量级。方波三脉冲源输出指标达到了电压250 kV,脉冲电流10 kA,峰值功率2.5 GW,重复率1 MHz,脉冲上升时间约40 ns,脉冲平顶宽度50 ns。     

One Loop Effects to the Process e+e－→bs in Topcolor-Assisted Multiscale Technicolor Model

We calculated the Pseudo-Goldstone bosons (technipions, top-pious) corrections to the cross-section a of the process e⁺e^－→bs in topcolor-assisted multiscale technicolor model at LEP Ⅱ energy region. Our results show that, with reasonable value of the parameters, the cross-section is one order larger than that predicted by the standard model. We discussed the possibility of detecting this rare event at the B-factoly.     

Solution for One-Dimensional Quantum Oscillator with Time-Dependent Frequency and Mass

Based on the generalized linear quantum transformation theory, we present a normal ordering evolution operator for onedimensional quant urn oscillator with time-dependent frequency and mass, then give the exact expression of the evolution matrix elements, wave function and expectation value of arbitrary observable.     

F-P滤波器对啁啾光脉冲脉宽的扩展和压缩

导出了啁啾光脉冲通过F P滤波器后输出脉冲光强的解析表达式。在此基础上 ,对啁啾光脉冲通过F P滤波器后其脉冲宽度的变化进行了研究。结果表明 ,对于一确定的滤波器 ,其对输入脉冲脉宽的影响与输出脉冲的宽度及啁啾因子的大小有关     

Measurement of underground motion at the SSRF site

For the Shanghai Synchrotron Radiation Facility (SSRF) and future Shanghai Free‐Electron Laser projects, ground vibration is an important factor and, in order to attenuate it, the construction of a deep tunnel is under consideration. This paper concentrates on the investigation of ground vibration at different underground levels down to 60 m below surface, in order to understand the effect of vibration attenuation with depth. The effect of traffic is also studied using a 10 ton truck, with ground motion compared in different directions. Finally, a summary and some suggestions on these two projects are given.     

激光点火系统温度效应及其控制技术的研究

激光点火系统应用于武器系统必须符合高低温性能的要求。研究了激光点火系统的高低温特性,得到了激光二极管阈值电流和输出光功率随温度变化的规律。基于对规律的分析,研制了带温控技术的激光点火系统。该系统以单片机为控制部件,以TEC为温控部件,以负温度系数热敏电阻为测温元件。     

Vacuum-free fabrication of high-performance semitransparent perovskite solar cells via e-glue assisted lamination process

From a base material of conductive polymer(poly-(3,4-ethylenedioxythiophene):poly(styrenesulfonate),PEDOT:PSS),a flexible and high-conductivity(as low as 45Ω/sq)transparent electrode was fabricated on polydimethylsiloxane elastomer by an acid treatment and transfer process.Combined with the D-sorbitol-doped PEDOT:PSS electric glue,we successfully demonstrated a vacuum-free and ambient lamination fabrication process for semi-transparent perovskite solar cells using triple cation Cs_(0.05)(MA_(0.17)FA_(0.83))_(0.95)Pb(I_(0.83)Br_(0.17))_3perovskite.By this manufacturing-friendly lamination process,we fabricated semitransparent perovskite solar cell devices with power conversion efficiencies up to 16.4%and variable transparencies.