5-(对羧基苯偶氮)-8-羟基喹啉与钍的显色反应及应用

研究了钍与5-(对羧基苯偶氮)-8-羟基喹啉(5-CPAHQ)的显色反应条件:在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下,pH4.4-5.4缓冲介质中,形成稳定的橙红色络合物,最大吸收波长为490nm,ε=1.10×105L·mol-1·cm-1,钍在0-9μg/25mL范围内符合比尔定律。用TBP萃淋树脂分离,该方法可用于测定矿石中的微量钍。     

EXACT CONTROLLABILITY FOR FIRST ORDER QUASILINEAR HYPERBOLIC SYSTEMS WITH ZERO EIGENVALUES＊＊＊

For a class of mixed initial-boundary value problem for general quasilinear hyperbolic sys-tems with zero eigenvalues, the authors establish the local exact controllability with boundary controls acting on one end or on two ends and internai controls acting on a part of equations in the system.     

STUDIES ON HYPERFINE STRUCTURE AND ISOTOPE SHIFT OF SOME EXCITED STATES IN Yb AND Tm ATOMS

The hyperfine structures and isotope shifts in some excited states of Yb and Tm have been measured using laser-atomic beam interaction, stepwise excitation and fluorescence detection techniques. From the experimental results, magnetic dipole hyperfine constants A and electric quadrupole hyperfine constants B have been derived. So for as we know, the A factor of [4f¹²5d6s6p]9/2 level in Tm is given for the first time.     

A Two-Dimensional Photonic Crystal Slab Mirror with Silicon on Insulator for Wavelength 1.3μm

A concrete two-dimensional photonic crystal slab with triangular lattice used as a mirror for the light at wavelength 1.3μm with a silicon-on-insulator （SOI） substrate is designed by the three-dimensional plane wave expansion method. For TE-like modes, the bandgap in the Г-K direction is from 1087nm to 1559nm. The central wavelength in the bandgap is about 1.3μm, hence the incident light at wavelength 1.3μm will be strongly reflected. Experimentally, such a photonic crystal slab is fabricated on an SOI substrate by the combination of EBL and ICP etching. The measurement of its transmission characteristics shows the bandgap edge in a longer wavelength is about 1540 nm. The little discrepancy between the experimental data and the theoretical values is mainly due to the size discrepancy of the fabricated air holes.     

纳米级氧化铁的合成及其对六价铬的吸附性能研究

采用溶胶-凝胶法合成了纳米氧化铁,研究了合成条件,并采用TEM对产品进行了表征,测得产品的平均粒径为20-30nm.研究了纳米级氧化铁对Cr（Ⅵ）的吸附.在pH=3.0,吸附比为3.5×10-6:1×10-2（g/g）时,平均吸附效率为95.98％,最大吸附量为398.3μg Cr（Ⅵ）/g.采用2mol/LNaOH可完全洗脱纳米氧化铁所吸附的Cr（Ⅵ）,测定了回收后的纳米氧化铁对Cr（Ⅵ）的吸附效率,结果表明纳米级氧化铁可循环使用,这将为环境污水中Cr（Ⅵ）的治理及研究纳米材料的吸附行为提供参考.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

Direct imaging of a high-power diode laser cavity using a transparent indium-tin-oxide (ITO) contact

We describe a novel "see-through" indium-tin-oxide contact on the n-side of a high power unstable resonator semiconductor laser (URSL) that allows direct observation of the cavity during high power operation. Under optimized annealing conditions this transparent ITO contact has a low enough specific contact resistivity to permit normal high power CW operation of the URSL and allows the observation of filamentation. This contact scheme is applicable to a wide range of semiconductor lasers and is especially appropriate for high power devices. The same structure can also be used to obtain a 2-D thermal map of the laser cavity.     

Vacuum Fluctuations and Motion of a Charged Test Particle in a Cylindrical Spacetime

The effects of quantum electromagnetic fluctuations upon the motion of a test charged particle are examined in a cylindrical spacetime in which one spatial is compactified. The mean squared fluctuations in the velocity and position of the test particle are calculated. It is found that the random motion of the test particle will be anisotropic. The possible consequences for theories with extra compactified spatial dimensions are discussed.     

潜体在非均质流体中的平衡位置与平衡过程

以探空气球为例,讨论潜体在非均质流体中的平衡位置与平衡过程.