1,2-聚丁二烯介电松弛的复平面分析

本文对1,2-聚丁二烯的介电松弛进行了复平面分析.结果表明,在1,2-聚丁二烯的玻璃化转变过程中,ε″(ω)与ε＇(ω)的关系满足Havriliak-Negami方程.由复平面图求出了样品的静态和光频下的介电系数,平均松弛时间和松弛时间分布参数.利用所得数据讨论了1,2-聚丁二烯在玻璃化转变过程中的构象变化、松弛时间分布和平均偶极矩等问题.     

Biosorption of copper(II) and zinc(II) from aqueous solution by Pseudomonas putida CZ1

To study Pseudomonas putida CZ1, having high tolerance to copper and zinc on the removal of toxic metals from aqueous solutions, the biosorption of Cu(II) and Zn(II) by living and nonliving P. putida CZ1 were studied as functions of reaction time, initial pH of the solution and metal concentration. It was found that the optimum pH for Zn(II) removal by living and nonliving cells was 5.0, while it was 5.0 and 4.5, respectively, for Cu(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The adsorption data with respect to both metals provide an excellent fit to the Langmuir isotherm. The binding capacity of living cells is significantly higher than that of nonliving cells at tested conditions. It demonstrated that about 40-50% of the metals were actively taken up by P. putida CZ1, with the remainder being passively bound to the bacterium. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 72.5 and 45.6% under 0.1M HCl and it was 95.3 and 83.8% by nonliving cells, respectively. It may be due to Cu(II) and Zn(II) uptake by the living cells enhanced by intracellular accumulation.     

制备方法对Mg1.9Al0.1Ni合金储氢性能的影响

文中采用机械合金化(MA)和氢化燃烧法(HCS)制备了Mg1.9Al0.1Ni,通过对它们储氢性能的对比研究发现,MA优于HCS.采用MA制得的Mg1.9Al0.1Ni储氢合金具有较高的活性和高储氢量,对PCT结果进行计算,得出温度和氢平衡压的关系式.Mg1.9Al0.1Ni(MA)553K时100s内吸放氢量分别为2.67和2.54 mass%H.用XRD方法进行物相分析,表明添加适量Al没有改变Mg2Ni的物相结构,由于MA能够制备出纳米晶粒,使得Mg1.9Al0.1Ni合金具有更好的储放氢动力学性能.     

基于聚合物点的电致化学发光生物传感器用于葡萄糖检测

羧基功能化的聚[(9,9-二辛基芴基-2,7-二基)-co-(1,4-苯并-{2,1′,3}-噻二唑)]聚合物点(PFBT-COOH)在无外加共反应试剂的条件下具有高的电致化学发光(ECL)信号,且过氧化氢(H_2O_2)对其ECL具有高效猝灭作用。采用PFBT-COOH修饰玻碳电极,进一步交联葡萄糖氧化酶(GOD)以构建酶传感器(GOD/PFBT-COOH/GCE)。随着检测底液中葡萄糖浓度的增加,葡萄糖在GOD催化下原位产生的H_2O_2量增加,导致传感器的ECL信号逐渐减弱,从而实现葡萄糖的准确、快速、灵敏检测。此方法测得葡萄糖的线性范围为1.0×10~(-7)～3.0×10~(-3) mol/L,检出限为3.0×10~(-8) mol/L。血清样品中葡萄糖的加标回收率为98.5%～106%。该策略为酶传感器的构建提供了新思路,为葡萄糖的检测提供了新方法。     

WATER-BLOWN POLYURETHANE RIGID FOAMS MODIFIED BY CHEMICAL PLASTICATION

1. INTRODUCTIONThese years, HCFC-141b may be the most used blowing agent for its useful properties. But, because of its high global warming effect leading to the destruction of the ozone layer, production of HCFC141b has been forbidden. However, there are…     

配合物Cu(phen)2 (dca)2的合成及晶体结构

合成了配合物Cu(phen)2 (dca)2(phen=C12H8N2为1,10-邻菲啰啉,dca-为二氰基氨基阴离子),用IR对其结构进行了初步表征,并测定了配合物的晶体结构.该晶体属单斜晶系,空间群为P21/c;晶胞参数a=0.8869(2)nm,b=1.4691(2)nm,c=1.9298(2)nm,β=100.90(1)°;V=2.4691(8)nm3,Z=4,F(000)=1132.00,Dc=1.496g/cm3,R=0.051,RW=0.068.中心铜(Ⅱ)离子分别与两个phen中的四个N原子和两个dca-的两个N原子配位,形成六配位的变形八面体结构.     

Influence of pH on electrophoretic behavior of phenothiazines and determination of pKa values by capillary zone electrophoresis

The influence of buffer pH on the electrophoretic behavior of 13 structurally related phenothiazines and determination of pK(a) values by capillary zone electrophoresis (CZE) were investigated. The results indicate that phenothiazines with a piperazine substituent behave quite differently from those with substituents having an aliphatic side chain or a piperidine moiety over the pH range studied. To separate these phenothiazines, it is preferable to select buffer pH in the range of 2.5-3.5. The pK(a) values of phenothiazines with three different types of substituents attached at the 10-position of the phenothiazine ring were determined. The determination of pK(a) values of phenothiazines allows us to rationalize the influence of buffer pH on the migration behavior of these compounds in CZE.     

新型双核铜配合物的合成,表征及其对苯乙烯环氧化的催化作用

设计合成了５种新型双核铜配合物，用ＥＡ，ＩＲ，ＵＶ－Ｖｉｓ，ＸＰＳ，ＥＰＲ等进行了结构表征，并研究了这些Ｃｕ２配合物模拟双核铜单加氧酶多巴胺β－羟化酶催化苯乙烯环氧化反应的特征。结果表明，这些配合物具有两种类型的结构：脱质子型Ｃｕ２ＬＯＨ和非脱质子型「（Ｃｕ２Ｈ２ＬＸ）Ｙ」Ｙ（Ｘ＝Ｙ＝Ｃｌ＾１－，Ｂｒ＾－；Ｘ＝ＯＨ，Ｙ＝Ｏ２ＣｌＯ＾－２），两类配合物可相互转化。非脱质子型配合物催化ＰｈＩＯ对苯乙烯     

BDMA-catalyzed DDA-epoxy resin system: Temperature and composition effects on curing mechanism

DSC and IR data on benzyldimethylamine-catalyzed dicyandiamide-DGEBA prepolymer system have been utilized to investigate the influences of temperature and composition on the curing mechanism. Etherification as a competitive reaction is favored at lower temperature. On the other hand, the reaction pathway of dicyandiamide (DDA) varies with temperature, especially at the first stage of reaction. At 100°C, the reaction of DDA is shown to be essentially the substitution of the hydrogen atoms by ring-opening of epoxy groups, giving rise to N-alkyl cyanoguanidine. But at 140°C or 160°C, the initial reaction of DDA involves a transformation of nitrile groups to imine groups. A greater amount of BDMA and a higher amine-to-epoxy ratio favor the etherification. The glass transition temperature T_g is a complex function of these different mechanisms; higher T_g could be reached with a amino-to-epoxy ratio equal to 0.6 and after a curing cycle including a precure at 100°C.     

铁-钼/活性炭催化剂的费-托合成反应性能

用微型固定床反应器和原位穆斯堡尔谱考察了在活性炭担载的铁-钼双金属催化剂上的费-托合成反应和在反应条件下的物相。已知在费-托合成中铁有利于生成长链烃,钼有利于生成低碳烃。铁-钼/活性炭催化剂则综合了铁和钼的性质,其中铁-钼/油棕炭催化剂具有很好的活性和液化石油气选择性。在反应中,富钼催化剂的主要物相为铁-钼碳化物,而富铁催化剂的物相则为铁-钼碳化物和e’-Fe_2·2C碳化铁。