纳米级氧化铁的合成及其对六价铬的吸附性能研究

采用溶胶-凝胶法合成了纳米氧化铁,研究了合成条件,并采用TEM对产品进行了表征,测得产品的平均粒径为20-30nm.研究了纳米级氧化铁对Cr（Ⅵ）的吸附.在pH=3.0,吸附比为3.5×10-6:1×10-2（g/g）时,平均吸附效率为95.98％,最大吸附量为398.3μg Cr（Ⅵ）/g.采用2mol/LNaOH可完全洗脱纳米氧化铁所吸附的Cr（Ⅵ）,测定了回收后的纳米氧化铁对Cr（Ⅵ）的吸附效率,结果表明纳米级氧化铁可循环使用,这将为环境污水中Cr（Ⅵ）的治理及研究纳米材料的吸附行为提供参考.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

球墨铸铁材料对激光的吸收率

球墨铸铁因其优良性能而被广泛用作模具材料。对球墨铸铁冲压模具的激光表面处理已成为改善其耐磨性、提高使用寿命的重要方法。一定激光参量下吸收率的大小又直接影响到表面处理的质量。因此,确定球墨铸铁材料对激光的吸收率十分必要。通过热电偶测温,计算机数据采集系统进行定点温度采集,并结合数值模拟方法,对吸收率进行了标定,即首先根据预置的吸收率计算,预测被测点处的温度响应,并与实测响应比较,不断修正吸收率值,使预测温度响应和实验值吻合,由此获得吸收率。采用这种方法获得了球墨铸铁材料在大气条件下对激光的吸收率为23.3%。为激光处理球墨铸铁材料时工艺参量的选择和优化提供了一定参考。     

Synthesis and Crystal Structure of a Ternary Complex: [Ni(phen)2(pmal)]·8H2O

A new ternary complex [Ni(phen)(pmal)]·8H2O (phen = 1,10-phenanthroline,pmal2- = phenethyl malonic acid) has been synthesized by the reaction of nickel acetate, phen and phenethyl malonic acid. Elemental analysis, IR spectra and X-ray single-crystal diffraction were carried out to determine the composition and crystal structure. Crystal data for this complex: triclinic system, space group P1, a = 10.387(5), b = 13.112(6), c = 14.229(6) (A), α = 76.176(7), β =83.778(8), y = 71.770(6)°, C35H42N4O12Ni, Mr= 769.44, Z = 2, F(000) = 808, V = 1786.1 (A)3, Dc =1.431 g/cm3, μ = 0.612 mm-1, the final R = 0.0653 and wR = 0.1033 for 9379 (Rint = 0.0244)independent reflections and 4730 observed reflections (I ＞ 2σ(I)). Structural analysis shows that the coordination geometry of Ni(Ⅱ) is a distorted octahedron. A novel two-dimensional structure is constructed from (H2O)4 and (H2O)12 water clusters, and the complex forms a 3-D network supramolecular structure by hydrogen bonds and π-π stacking of neighboring phens.     

Large second-order optical nonlinearities of s-triazine derivatives: View from micro molecules to macro crystals

Organic nonlinear optics (NLO) is also called mo-lecular nonlinear optics. In recent years organic mate-rials have been intensively studied because of their large NLO coefficients and structural diversities[1―3]. Second harmonic generation (SHG) is a bas…     

Vacuum Fluctuations and Motion of a Charged Test Particle in a Cylindrical Spacetime

The effects of quantum electromagnetic fluctuations upon the motion of a test charged particle are examined in a cylindrical spacetime in which one spatial is compactified. The mean squared fluctuations in the velocity and position of the test particle are calculated. It is found that the random motion of the test particle will be anisotropic. The possible consequences for theories with extra compactified spatial dimensions are discussed.     

半导体浪涌保护器基区参数探讨

讨论了半导体浪涌保护器件的基区宽度，着重分析了基区宽度与开通电压、静电电容、浪涌能力的关系，指出控制基区宽度，可有效地提高器件的浪涌能力，降低静电电容和开通电压     

潜体在非均质流体中的平衡位置与平衡过程

以探空气球为例,讨论潜体在非均质流体中的平衡位置与平衡过程.     

HL-2A װ��MW ������������ϵͳ��˿��Դ�����������

The main circuit topology, control hardware and control sequence of the cathode filament power supply for the HL-2A neutral beam heating system was introduced. Feedback control simulation of main circuit of filament power supply is carried out through MATLAB simulation software. It is found that the ripple factor is about 1%when the current is about 1000A, and the ripple coefficient increases to 3% when the current drops to 200A. Without the AC filter reactor in series L₁ and parallel harmonic filter LC in the low level control cabinet, the output current ripple coefficient becomes larger obviously. It shows that L₁ and LC not only absorb harmonic current, but also filter the chopper waveform after AC voltage regulation to make the output waveform smoother.