Evaluation of headspace-gas chromatography/mass spectrometry for the analysis of benzene in vitamin C drinks; pitfalls of headspace in benzene detection

Recently, there have been reports regarding the presence of benzene in vitamin C drinks. This is caused by sodium benzoate and ascorbic acid (vitamin C), which can react together to induce benzene formation. While the headspace gas chromatography method is well known for the detection of benzene, there could be pitfalls in the process of benzene extraction. This study was performed to check if benzene could be generated under high-temperature incubation conditions. As a result, the amount of benzene detected by headspace-gas chromatography/mass spectrometry (HSGC/MS) was affected by temperature changes. As the temperature of the sample vial was increased, newly generated benzene from the headspace also increased, causing false-positive determination of benzene. Although 80 degrees C is generally accepted for the temperature of headspace sample vials, lower temperatures, such as 40 degrees C, minimize the false-positive identification of benzene. Considering that this minimization allows benzene to be quantified at around 5 ppb, this lower temperature should definitely be considered since benzene, which is formed in sodium benzoate, can appear in vitamin C drinks under certain circumstances. The proposed analysis method of benzene in vitamin C drinks by HSGC/MS at 40 degrees C is an accurate and universal method for the monitoring of benzene without false-positive identification.     

Self-assembled metallocycles with two interactive binding domains

Five metallocycles 1 a-e have been self-assembled from S-shaped bispyridyl ligands 2 a-e and a palladium complex, [Pd(dppp)(OTf)(2)] (dppp=1,3-bis(diphenylphosphanyl)propane), and have been characterized by elemental analysis and various spectroscopic methods including (1)H NMR spectroscopy and electrospray ionization (ESI) mass spectrometry. These metallocycles all are monocyclic compounds, but can fold to generate two binding domains bearing hydrogen-bonding sites based on pyridine-2,6-dicarboxamide units. The binding properties of the metallocycles with N,N,N',N'-tetramethylterephthalamide (G) have been probed by means of ESI mass spectrometry and (1)H NMR spectroscopy. The results both in the gas phase and in solution are consistent with the fact that the metallocycles accommodate two molecules of the guest G. Thus, the ESI mass spectra clearly show fragments corresponding to the 1:2 complexes in all cases. (1)H NMR studies on 1 a and G support the formation of a 1:2 complex in solution; the titration curves are nicely fitted to a 1:2 binding isotherm, but not to a 1:1 binding isotherm. In addition, a Job plot also suggests a 1:2 binding mode between 1 a and G, showing maximum complexation at approximately 0.33 mol fraction of the metallocycle 1 a in CDCl(3). The binding constants K(1) and K(2) are calculated to be 1600 and 1400 M(-1) (+/-10 %), respectively, at 25 degrees C in CDCl(3), indicative of positively cooperative binding. This positive cooperativity was confirmed by the Hill equation, affording a Hill coefficient of n = 1.6. Owing to insufficient solubility in CDCl(3), for comparison purposes the binding properties of the metallocycles 1 b-e were investigated in a more polar medium, 3 % CD(3)CN/CDCl(3). (1)H NMR titrations revealed that the metallocycles all bind two molecules of the guest G with Hill coefficients ranging from 1.4 to 1.8. This positive cooperativity may be attributed to a structural reorganization of the second binding cavity when the first guest binds to either one of the subcavities present in the metallocycles.     

Sequence- and site-specific photodissociation at 266 nm of protonated synthetic polypeptides containing a tryptophanyl residue

Photodissociation at 266 nm of protonated synthetic polypeptides containing a tryptophanyl residue was investigated using a homebuilt tandem time-of-flight mass spectrometer equipped with a matrix-assisted laser desorption/ionization source. Efficient photodissociation of the protonated peptides was demonstrated. Most of the intense peaks in the laser-induced tandem mass spectra were sequence ions. Furthermore, sequence ions due to cleavages at all the peptide bonds were observed; this is a feature of the technique that is particularly useful for peptide sequencing. Fragmentations at both ends of the tryptophanyl residue were especially prevalent, which can be useful for location of the tryptophanyl chromophore in a peptide.     

Ox-LDL suppresses PMA-induced MMP-9 expression and activity through CD36-mediated activation of PPAR-g

During chronic inflammatory response, mono- cytes/macrophages produce 92-kDa matrix metalloproteinase-9 (MMP-9), which may contribute to their extravasation, migration and tissue remodeling. Activation of peroxisome proliferator- activated factor receptor-g (PPAR-g) has been shown to inhibit MMP-9 activity. To evaluate whether ox-LDL, a PPAR-g activator, inhibits PMA-induced MMP-9 expression and activity, and if so, whether CD36 and PPAR-g are involved in this process, we investigated the effect of ox-LDL on MMP-9 expression and activity in PMA-activated human monocytic cell line U937. PMA-induced MMP-9 expression and activity were suppressed by the treatment with ox-LDL (50 mg/ml) or PPAR-g activators such as troglitazone (5 mM), ciglitazone (5 mM), and 15d- PGJ2 (1 mM) for 24 h. This ox-LDL or PPAR-g activator-mediated inhibition of MMP-9 activity was diminished by the pre-treatment of cells with a blocking antibody to CD36, or PGF2a (0.3 mM), which is a PPAR-g inhibitor, as well as overexpression of a dominant-negative form of CD36. Taken together, these results suggest that ox-LDL suppresses PMA-induced MMP-9 expression and activity through CD36-mediated activation of PPAR-g.     

Effect of hydrothermal aging on NOx reduction performance for Sb–V–CeO2/TiO2 catalyst

Research on Chemical Intermediates - Herein, we investigated the NOx reduction performance of Sb–V–CeO2/TiO2 (SbVCT) catalyst subjected to hydrothermal aging, where 6 vol% of H2O was...     

Observation of negative charge trapping and investigation of its physicochemical origin in newly synthesized poly(tetraphenyl)silole siloxane thin films

A new kind of organic-inorganic hybrid polymer, poly(tetraphenyl)silole siloxane, was invented and synthesized for realization of its unique charge trap properties. The organic portions consisting of (tetraphenyl)silole rings were responsible for negative charge trapping, while the Si-O-Si inorganic linkages provided the intrachain energy barrier for controlling electron transport. The polysilole siloxane dielectric thin films were fabricated by spin-coating and curing of the polymers, followed by characterization with spectroscopic ellipsometry (SE), near edge X-ray absorption fine structure spectroscopy (NEXAFS), and photoemission spectroscopy (PES). The abrupt increase in density and decrease in thickness of the thin film at a curing temperature of 100 °C was attributed to a thermodynamically preferred state in the nanoscopic arrangement of the polymer chains; this was due to cofacial π-π interactions in a skewed manner between peripheral phenyl groups of the (tetraphenyl)silole rings of the adjacent polymer chains. Using the NEXAFS spectrum to assess high electron affinity, the LUMO energy level of the dielectric thin film cured at 150 °C was positioned 1 eV above the Fermi energy level (E(F)). The electron trapping of the dielectric thin films was confirmed from the positive flat band shift (ΔV(FB)) in the capacitance-voltage (C-V) measurements performed within the metal-insulator-semiconductor (MIS) device structure, which strongly verified the polymer design concept. From the simple kinetics model of the electron transport, it was proposed that the flat band shift (ΔV(FB)) or trap density of the negative charges (|ρ|) was logarithmically proportional to the decay constant (β) for the electron-tunneling process. When a phenyl group of a silole ring in a polymer chain was inserted into the two available phenyl groups of another silole ring in another polymer chain, the electron transfer between the groups was enhanced, decreasing the trap density of the negative charges (|ρ|). For the thermodynamically preferred state generating the high refractive index, the distance between the two phenyl groups of the adjacent polymer chains was estimated to be in the range of 0.27-0.36 nm.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.