MR microscopy of micron scale structures

Magnetic resonance (MR) microscopy of up to 1–5-μm resolutions have been reported previously. The tested phantom structures, however, had widths one order of magnitude bigger than the reported resolutions, e.g., spherical beads or capillary tubes of tens-of-micron diameters or wall thicknesses have been imaged. In this study, we fabricated structures having a few micron widths on a silicon wafer and imaged them using our 1-μm-resolution MR microscopy at 14.1 T. Micron scale width structures were, for the first time, resolved by MR microscopy.     

Fabrication of a solution-processed thin-film transistor using zinc oxide nanoparticles and zinc acetate

We have fabricated a solution-processed ZnO thin-film transistor without vacuum deposition. ZnO nanoparticles were prepared by the polyol method from zinc acetate, polyvinyl pyrrolidone, and diethyleneglycol. The solution-processable semiconductor ink was prepared by dispersing the synthesized ZnO in a solvent. Inverted stagger type thin-film transistors were fabricated by spin casting the ZnO ink on the heavily doped Si wafer with 200 nm thick SiO₂, followed by evaporation of Cr/Au source and drain electrodes. After the drying and heat treatment at 600 C, a relatively dense ZnO film was obtained. The film characteristics were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to obtain the electrical properties of the solution-derived transistor, the on–off ratio, threshold voltage, and mobility were measured.     

Thermal Hysteresis Accompanying Incommensurate-Commensurate Phase Transition in Mixed Crystals (K1-xCsx)2ZnCl4

The mixed crystal (K_1-xCs_x)₂ZnCl₄ with x = 0, 0.001, 0.01, 0.1, and 0.2 with optical quality has been grown by the Czochralski method. Using the Atomic Absorption Spectroscopy (AAS) and Energy Dispersive Spectroscopy (EDS), we determined the amount of Cs ion included in the mixed crystal. By using of DTA and DSC, we observed the change of T_c and T_i. The thermal hysteresis in the dielectric constants show strong dependence on the thermal process and on the amount of impurity which are explained by the influence of the thermal process and impurity, respectively on the creation, annihilation, and growth of discommensuration (DC).     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.     

Synthesis and size control of monodisperse copper nanoparticles by polyol method

We describe herein the synthesis of metallic copper nanoparticles in the presence of poly(vinylpyrrolidone), employed as a protecting agent, via a polyol method in ambient atmosphere. The obtained copper particles were confirmed by XRD to be crystalline copper with a face-centered cubic (fcc) structure. We observed monodisperse spherical copper nanoparticles with a diameter range 45+/-8 nm. The particle size and its distribution are controlled by varying the synthesis parameters such as the reducing agent concentration, reaction temperature, and precursor injection rate. The precursor injection rate plays an important role in controlling the size of the copper nanoparticles. On the basis of XPS and HRTEM results, we demonstrate that the surface of the copper is surrounded by amorphous CuO and that poly(vinylpyrrolidone) is chemisorbed on the copper surface.     

Mathematical Modeling and Simulation of Antibubble Dynamics

In this study, we propose a mathematical model and perform numerical simulations for the antibubble dynamics. An antibubble is a droplet of liquid surrounded by a thin film of a lighter liquid, which is also in a heavier surrounding fluid. The model is based on a phase-field method using a conservative Allen-Cahn equation with a space-time dependent Lagrange multiplier and a modified Navier-Stokes equation. In this model, the inner fluid, middle fluid and outer fluid locate in specific diffusive layer regions according to specific phase filed (order parameter) values. If we represent the antibubble with conventional binary or ternary phase-field models, then it is difficult to have stable thin film. However, the proposed approach can prevent nonphysical breakup of fluid film during the simulation. Various numerical tests are performed to verify the efficiency of the proposed model.     

Crystalline-phase-dependent red emission behaviors of Gd2O3:Eu3+ thin-film phosphors

Gd₂O₃:Eu³⁺ luminescent thin films have been grown on Al₂O₃(0001) substrates using pulsed-laser deposition. The films grown at different deposition conditions showed different crystalline phases, surface morphologies and luminescent characteristics. Both cubic and monoclinic crystalline phases were observed for the Gd₂O₃:Eu³⁺ films, and the crystalline structure and the surface morphology of the films were highly dependent on the oxygen pressure and substrate temperature. The cubic system showed a higher luminescence than the monoclinic system. The luminescence characteristics were strongly influenced by not only the crystalline structure but also the surface morphology of the films. The photoluminescencebrightness data obtained from Gd₂O₃:Eu³⁺ films indicate that Al₂O₃(0001) is a promising substrate for growth of high-quality Gd₂O₃:Eu³⁺ thin-film red phosphor. In particular, the Gd₂O₃:Eu³⁺ films showed a much better photoluminescence behavior than a Y₂O₃:Eu³⁺ films with the same thickness. PACS 78.20.-e; 78.55.-m; 78.66.-w     

k-space inherited parallel acquisition (KIPA): application on dynamic magnetic resonance imaging thermometry

In this study, a novel method for dynamic parallel image acquisition and reconstruction is presented. In this method, called k-space inherited parallel acquisition (KIPA), localized reconstruction coefficients are used to achieve higher reduction factors, and lower noise and artifact levels compared to that of generalized autocalibrating partially parallel acquisition (GRAPPA) reconstruction. In KIPA, the full k-space for the first frame and the partial k-space for later frames are required to reconstruct a whole series of images. Reconstruction coefficients calculated for different segments of k-space from the first frame data set are used to estimate missing k-space lines in corresponding k-space segments of other frames. The local determination of KIPA reconstruction coefficients is essential to adjusting them according to the local signal-to-noise ratio characteristics of k-space data. The proposed algorithm is applicable to dynamic imaging with arbitrary k-space sampling trajectories. Simulations of magnetic resonance thermometry using the KIPA method with a reduction factor of 6 and using dynamic imaging studies of human subjects with reduction factors of 4 and 6 have been performed to prove the feasibility of our method and to show apparent improvement in image quality in comparison with GRAPPA for dynamic imaging.