Benzylic cleavage and McLafferty rearrangement under electron ionization conditions in the fragmentation of 5,6-dialkyl-2, 4-diarylpyrimidines

Several 5,6-dialkyl-2,4-diarylpyrimidines were prepared and their electron ionization (EI) mass spectra reported. The benzylic cleavage takes place easily together with an important McLafferty rearrangement. The involvement of the nitrogen atom appears to be important in the fragmentation of 5-methyl-substituted pyrimidines. In contrast, the 6-methyl-substituted pyrimidines undergo benzylic cleavage without hydrogen transfer. Thus, the difference in the mass spectrometric behaviour allows the identification of these isomeric compounds which, in contrast, exhibit only small differences in their NMR spectra. Copyright 1999 John Wiley & Sons, Ltd.     

Terpenoids of the red alga laurenciapinnatifida

The structures of three brominated terpenoids which are natural products from the red alga Laurencia pinnatifida (Gmal. Lamour) are described. The structures of the sesquiterpenes $\text{4}$ and $\text{5}$ were determined by spectral comparison and chemical interconversion. The structure of the squalene-derived terpenoid $\text{8}$ was secured by chemical transformation into thyrsiferol, a brominated triterpene previously isolated from the red alga Laurencia thyrsifera.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

Analysis and toxicity of methomyl and ametryn after biodegradation

The controlled biodegradation of ametryn and methomyl has been performed, in accordance with the OECD Zahn-Wellens/EMPA procedure, by use of an enriched mixture of activated sludge collected from three domestic waste-water-treatment plants (WWTP). During the process concentrations of ametryn and methomyl in the water samples were isolated by solid-phase extraction (SPE); recovery rates were 98.9 and 93.2 for methomyl and ametryn, respectively. Liquid chromatography-mass spectrometry (LC-MS) was used to determine final pesticide concentrations and for metabolite identification.The efficiency of aerobic biodegradation of ametryn and methomyl was evaluated by measuring both the decrease in the concentration of the pesticides and global properties such as the chemical oxygen demand (COD). The acute toxicity of ametryn and methomyl was evaluated by use of the ToxAlert100 biological test, which is based on inhibition of the bioluminescence of Vibrio fischeri. There was significant correlation between results from primary and ultimate biodegradation and those from determination of toxicity. Pesticide concentrations were always reduced to below the limit of detection in less than 17 days. High COD removal (90-96%) was achieved in 28 and 18 days for methomyl and ametryn, respectively.     

Core/valence partition and relativistic effects in effective potentials for transition metals

Two different versions, relativistic and nonrelativistic, of the “shape-consistent” effective potential (EP ) formalism are analyzed in ab initio calculations for transition metals. The influence of alternative core/valence partitions on the reliability of the procedure is discussed. The accuracy of EP results for transition metals is shown to depend on adequate choices of the valence subspace and proper inclusion of relativistic effects.     

Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

Developing selective and coherent polymorphic crystals at the nanoscale offers a novel strategy for designing integrated architectures for photonic and optoelectronic applications such as metasurfaces, optical gratings, photodetectors, and image sensors. Here, a direct optical writing approach is demonstrated to deterministically create polymorphic 2D materials by locally inducing metallic 1T′-MoTe₂ on the semiconducting 2H-MoTe₂ host layer. In the polymorphic-engineered MoTe₂, 2H- and 1T′- crystalline phases exhibit strong optical contrast from near-infrared to telecom-band ranges (1–1.5 µm), due to the change in the band structure and increase in surface roughness. Sevenfold enhancement of third harmonic generation intensity is realized with conversion efficiency (susceptibility) of ≈1.7 × 10⁻⁷ (1.1 × 10⁻¹⁹ m² V⁻²) and ≈1.7 × 10⁻⁸ (0.3 × 10⁻¹⁹ m² V⁻²) for 1T′ and 2H-MoTe₂, respectively at telecom-band ultrafast pump laser. Lastly, based on polymorphic engineering on MoTe₂, a Schottky photodiode with a high photoresponsivity of 90 AW⁻¹ is demonstrated. This study proposes facile polymorphic engineered structures that will greatly benefit realizing integrated photonics and optoelectronic circuits.