Mechanisms involved in the formation of phosphosilicate glass from a phosphoric acid dopant source

This study focused on how the formation of phosphosilicate glass (PSG) film affects the solar cell emitter profile when using an inline ultrasonic mist phosphoric acid source and an inline diffusion furnace. This investigation used a novel approach, whereby the samples were extracted from the inline furnace mid‐process that allowed for the investigation of incompletely formed PSGs. All experimentation was conducted at BP Solar Australia. Total Gravimetric Analysis found that the dilute phosphoric acid dehydrates to form a high concentration phosphoric acid layer on the top surface. X‐ray photoelectron spectroscopy then showed this top surface reacts with the silicon and is reduced to form silicon phosphide. ECV results then demonstrated that the sheet resistance and emitter surface concentration of phosphorus is dependent upon the ratio of phosphide to total phosphorus in the PSG film. Copyright © 2010 John Wiley & Sons, Ltd.     

High‐order implicit time integration for unsteady incompressible flows

The spatial discretization of unsteady incompressible Navier–Stokes equations is stated as a system of differential algebraic equations, corresponding to the conservation of momentum equation plus the constraint due to the incompressibility condition. Asymptotic stability of Runge–Kutta and Rosenbrock methods applied to the solution of the resulting index‐2 differential algebraic equations system is analyzed. A critical comparison of Rosenbrock, semi‐implicit, and fully implicit Runge–Kutta methods is performed in terms of order of convergence and stability. Numerical examples, considering a discontinuous Galerkin formulation with piecewise solenoidal approximation, demonstrate the applicability of the approaches and compare their performance with classical methods for incompressible flows. Copyright © 2011 John Wiley & Sons, Ltd.     

Coloured coatings containing mixed transition metal oxides

Glass coloured coatings of M_nO_m---N_pO_q---SiO₂ (M, N = Fe, Co, Ni, Mn, Cr) prepared on soda-lime-silica flat glasses by the sol-gel route using the dip-coating technique.

The optical properties of these films were investigated by spectrophotometry and the optical parameters obtained allowed the colouration mechanism acting in each case to be determined as well as a comparison to be made with the parameters on the single TMO coloured films. Colour coordinates were calculated in every case.

On the other hand coatings have been prepared consisting of two different single TMO films. The corresponding mixed coatings were compared with these double films, showing different behaviours and widening the colour spectrum of glass TMO coatings.     

Chemical composition of essential oil and headspace-solid microextracts from fruits of Myrica gale L. and antifungal activity

The essential oil and the volatile compounds of Myrica gale fruits were analysed by gas chromatography (GC) and GC-mass spectrometry (GC-MS). The volatile compounds were detected using two different fibres for headspace-solid phase microextraction (HS-SPME), Carboxen/PDMS and PDMS. Sixty two compounds were identified, which represented more than 90% of the total extracts. Major components of fruit essential oil are alpha-pinene (22.6%), 1,8-cineole (18.9%) and germacrone (14.2%), whereas they are germacrone (25.1%), alpha-pinene (12.2%), limonene (8.1%) and alpha-phellandrene (8.0%) for the leaf essential oil. Major volatile fruit compounds detected in HS-SPME were alpha-pinene, 1,8-cineole, p-cymene and eth-cadinene. As M. gale fruits are traditionally used in brewery for flavouring beer or as a spice in soups or stews, the antifungal properties of these essential oils were investigated on a panel of foodborne fungi, namely Aspergillus flavus, Cladosporium cladosporioides and Penicillium expansum. A complete antifungal activity was observed at 1000 ppm against C. cladosporioides. Both essential oil and entire fruits could thus be used as an additive in food or cosmetic preparations for their flavour, odour and their conservative properties.     

Determination of gas-phase acidities of dimethylphenols: Combined experimental and theoretical study

The gas-phase acidities of the six dimethylphenol isomers were determined experimentally, by using the kinetic method, and theoretically, through quantum chemistry calculations. The experimental values, relative to the gas-phase acidity of phenol, are (in kJ mol⁻¹): −1.76 ± 0.76 (2,3-Me₂C₆H₃OH), 1.78 ± 0.29 (2,4-Me₂C₆H₃OH), 0.83 ± 0.58 (2,5-Me₂C₆H₃OH), −4.39 ± 0.89 (2,6-Me₂C₆H₃OH), 5.38 ± 1.08 (3,4-Me₂C₆H₃OH), and 1.88 ± 0.08 (3,5-Me₂C₆H₃OH). This trend was discussed by considering the substituent effects on the thermodynamic stabilities both of the parent phenols and the corresponding phenoxide ions. The above acidity data, the literature values for 2-, 3-, and 4-methylphenol, and the substituent effects analysis allowed to develop a simple empirical method to estimate the acidity of any methyl-substituted phenol.     

Recent developments in ambient ionization techniques for analytical mass spectrometry

Ambient ionization techniques enable the interrogation of a variety of samples in their native state by mass spectrometry, and are rapidly advancing all fields where screening for the presence of various analytes in a broadband and/or high-throughput fashion is desirable. This Highlight article provides an introduction to the field, and showcases the different ionization approaches reported since 2004, with an emphasis on the most recent developments.     

Ag Doped Titanium Dioxide Nanocomposite‐modified Glassy Carbon Electrode as Electrochemical Interface for Catechol Sensing

The electrochemical sensing of catechol (CC) on a glassy carbon electrode modified with the ionothermal assisted synthesis of Ag doped TiO₂ a nanoparticle has been successfully demonstrated for the first time.Ag doped TiO₂ nanoparticles composite modified glassy carbon electrode exhibits higher electrocatalytic activity towards oxidation of catechol than glassy carbon electrode itself. The modified electrode also exhibits high selectivity towards this analyte in the presence of some of the metal ions and some of the biological compounds. Linear ranges and the limit of detections with the above electrode are 1–15 µM and 0.0249 µM respectively. The optimized protocol has been utilized for monitoring the catechol in some of the natural samples like apple juice and green tea and in industrial effluents.     

Divergent pathways in the reaction of Fischer carbenes and palladium

[reaction: see text] The Pd-catalyzed reaction of beta-arylaminochromium(0) carbene complexes produces by transmetalation the first isolated and X-ray structurally characterized bis-Pd(II) carbene complex, as well as other alternative reaction pathways, such as the oxidative addition-transmetalation sequence, not seen before in this chemistry.     

On the possibility that cyclodextrins' chiral cavities can be available on AOT n-heptane reverse micelles. A UV-visible and induced circular dichroism study

The formation of reverse micelles (RMs) of sodium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT) in n-heptane including two different beta-cyclodextrin (beta-CD) derivatives (hydroxypropyl-beta-CD, hp-beta-CD, and decenyl succinyl-beta-CD, Mod-beta-CD) is reported. Both cyclodextrins can be incorporated into AOT RMs in different zones within the aggregate, while beta-CD cannot. Using UV-vis and induced circular dichroism (ICD) spectroscopy and different achiral molecular probes (some azo dyes, p-nitroaniline and ferrocene), it was possible to determine that Mod-beta-CD is located with its cavity at the oil side of the AOT RM interface, while for hp-beta-CD the cavity is inside the RM water pool. Among the molecular probes used, methyl orange (MO) was the only one which gave the ICD signal when dissolved in the AOT RMs with hp-beta-CD, so a detailed study of MO behavior in homogeneous media was also performed to compare with the microheterogeneous media. The solvatochromic behavior of the dye depends not only on the polarity of the media but also on other specific solvent properties. A Kamlet-Taft analysis shows that the MO absorption spectrum shifts to longer wavelength with an increase in the solvent polarity-polarizability (pi*) and the hydrogen donor ability (alpha) of the medium. MO appears to be almost 3 times more sensitive to the pi* parameter than to the alpha parameter. In addition, from the MO absorption spectral changes with the hp-beta-CD concentration, the association equilibrium constants in pure water (K11W) and inside the RMs (K11RM) were computed. The results show that K11W is almost 10 times larger than the value inside the RMs. The latter can be explained considering that MO resides anchored to the RM interface through hydrogen bond interaction with the hydration bound water. This study shows for the first time that the cyclodextrin chiral cavity is available for a guest in an organic medium such as the RMs; therefore, we have created a potentially powerful nanoreactor with two different confined regions in the same aggregate: the polar core of the RMs and the chiral hydrophobic cavity of cyclodextrin.