浅谈工厂供配电系统中的节能措施

随着经济的快速发展,我国工业现代化的进程也不断地加快,这虽然带来了经济效益快速增长的效果,但也带来了我国电能资源紧张的局面。文中重点研究如何在工程供配电系统中实施节能措施。     

Deployment strategy for static chargers in WRSN

The traditional deployment strategy of static chargers in wireless rechargeable sensor networks (WRSN) covers all the area.The basic idea is to cover all the positions of nodes.A mathematical model of distance between a charger and the farthest node was established,the relationship between the number of nodes and the mathematical expectation of minimum radius of charging was analyzed,and deployment strategy for static chargers was proposed.The method based on the locations of all nodes that need to be charged in the area,used the smallest enclosing circle (SEC) algorithm and finds the optimal location of the charger through Euclidean delivery boy algorithm.It will decrease charging radius,reduce the minimum required transmitted power,thereby saving the average charging energy consumption.The experimental results demonstrated that the less the number locations that the nodes existed,the more energy will be saved.     

A coupled optoelectronic oscillator with three resonant cavities

A new single-mode optoelectronic oscillator (OEO) with three coupled cavities is proposed and demonstrated. A Fabry-Perot (F-P) cavity fiber laser and an optical-electrical feedback branch are coupled together to construct an optoelectronic oscillator, where the F-P cavity fiber laser serves as a light source, and a modulator is placed in the laser cavity to implement reciprocating modulation, which simultaneously splits the laser cavity into two parts and forms a dual-loop configuration. To complete an optoelectronic oscillator, part of optical signal is output from the F-P cavity to implement the feedback modulation, which constructs the third cavity. Since only the oscillation signal satisfies the requirements of all the three cavities, a single-mode oscillation can be finally achieved. Three resonant cavities are successfully designed without adding more optoelectronic devices, and the side-modes can be well suppressed with low cost. The oscillation condition is theoretically analyzed. In the experimental demonstration, a 20 GHz single longitudinal mode microwave signal is successfully obtained.     

装备发射可靠性建模与指标分配研究

区分并确定全寿命周期内发射可靠性的界面,构建武器装备发射可靠性框图和可靠性模型,采用一种改进的AGREE可靠性指标分配方法,考虑重要性、复杂性、环境、标准化、维修性、技术水平、工作时间比和元器件质量等8个权重因子,建立发射可靠性指标分配模型与分配方法,并应用于某装备发射可靠性指标的分配中,结果说明了该方法的合理性.     

柳毒蛾的触角结构与感受器扫描电镜观察

本文利用扫描电镜对柳毒蛾成虫触角的结构进行观察,结果表明,柳毒蛾成虫触角存在6种感受器,即毛形感器、腔锥形感器、刺形感器、锥形感器、鳞形感器、栓锥形感器。其中,以毛形感器最多,栓锥形感器最少。经观察,柳毒蛾雌雄成虫的触角一般形态结构无明显差异,其感器类型及分布具有性二型性。     

高功率光纤激光器及其在战术激光武器中的应用

作为目前世界上最先进的固体激光器——光纤激光器具有无以伦比的独特优势,它已广泛应用于战术激光武器。本文评述和分析了高功率光纤激光器的特点、最新进展,光束合成技术和光学相控阵,以及它们在战术激光武器中的应用。Abstract：     

改进Hough变换在直线铁轨图像边缘检测研究

针对铁路轨道数字图像处理中直线铁轨检测的快速有效问题,提出一种改进Hough变换直线铁轨检测方法.首先对图像进行小波提升,用经典的边缘检测LoG算子进行图像的边缘检测;然后计算图像空间直线斜率重叠度来快速检测出直线;最后将图像转换到参数空间,计算局部极大值点,检测出直线.通过大量的仿真实验证明了该方法对直线铁轨检测的有效性和实用性.     

基于CP分解的MIMO-OFDM系统接收信号盲检测

多输入多输出-正交频分复用( MIMO-OFDM)无线通信系统中接收信号从空间、时间、频率的维度形成多因素的阵列信号,传统的矢量或者矩阵代数的建模方法在处理多因素信号问题上显得不足,无法利用多因素间的关系,而张量分析在解决多维阵列信号处理的问题上具有优势。针对MIMO无线通信系统,结合OFDM技术,研究了张量信号的建模及分解方法,并充分利用张量信号的分解唯一性提高无线接收信号的检测能力。提出了基于CP( CANDECOMP/PARAFAC)张量分解方法对未知信道状态( CSI)的MIMO-OFDM系统进行接收端的张量信号建模和盲检测,并通过仿真分析验证了模型的可行性。仿真结果表明,在接收天线数目大于发送天线数目且各径信道独立情况下,基于CP分解的接收信号盲检测算法在误码率为10-4时,随着接收天线数目增加,信噪比可获得约5 dB的增益。     

基于移动信息化的物流仓储管理

主要对广东移动珠海分公司建立一套基于移动终端的仓储健康指标监控系统进行了研究。研究方案中改进设计了仓储健康指标监控体系,开展了相关数据分析处理,通过软硬件结合实现了对珠海分公司仓储运营健康度的监控及测试,结果数据经过专业测试比对确认有效。实验结果表明该方法客观、准确,能够避免以往人工测试仓储运营健康度带来的主观因素影响,具有很高的实用性。