5G 功放DPD 的FPGA 宽带实现及自动优化

5G 宽带功放数字预失真器(DPD)的FPGA 实现过程中,常遇到数字处理带宽不够和资源有限问题,对 此,文中提出一种基于双路并行数据流的数字预失真带宽扩展方法和基于Zynq Ultrascale+ MPSoC 的自动化模型优化 验证方法,可快速实现对5G 宽带功放线性化方案的优化。使用该并行处理结构的数字预失真器,克服了数字电路最 大时钟频率造成的对FPGA 线性化带宽的限制,使得数字预失真电路在每个时钟周期内可以处理更多的数据,不仅有 效地增加了数字处理带宽,而且降低了DPD 的功耗。然而,这种带宽增加以消耗更多硬件资源为代价,对此,文中同时 提出了对预失真非线性模型的在线自动优化方法,以简化非线性模型、降低DPD 的硬件资源开销。最后,在Zynq Ultrascale+ FPGA 实验平台上实现了具有两路并行数据处理的I-MSA 自优化数字预失真电路,采用100 MHz 的5G 新无 线电(NR)信号在2. 6 GHz 功率放大器上进行线性化实验验证,获得了满意的预失真性能,验证了所提方法的有效性。     

Carbon Nanotubes Grown on Sepiolite as Catalyst Carrier

Multi-walled carbon nanotubes were synthesized by the catalytic decomposition of acetylene at 750℃ over sepiolite powder,which was treated with aqueous cobalt nitrate. It is expected that the composite with high specific area will have high capacity of hydrogen storage.     

POLYMERIZATION OF OCTAFLUOROCYCLOBUTANE IN GLOW DISCHARGE Ⅱ. ESCA AND IR CHARACTERIZATION OF POLYMER STRUCTURE*

In a capacitively coupled discharge with external electrodes, He, H_2, N_2 or Ar were used as plasmagas, polymerization of octafluorocyclobutane was carried out under different conditions by varyingdischarge power, pressure, plasma gas and plasma-gas/monomer ratio. Structure of polymerizedproducts was characterized by IR spectroscopy and ESCA measurement. It was found that therewere six elements in the products, i.e. C, F, Si, O, N and H. The probably existed groups in poly-mers wer investigated. By analyzing the resolved peaks of C_(1S) region in ESCA spectra, effect of thereaction conditions on degree of branching of the polymerized products and the relationship of thepolymer structure wth the mechanism of the competitive ablation and polymerization process werestudied. In addition, polymer deposition process occurring in glow discharge was discussed.     

PHBV/HA骨修复材料的研究

利用硝酸钙与磷酸钠的水溶液制备羟基磷灰石(HA)，同时在HA生成过程中与聚羟基丁酸一戊酸酯(PHBV)复合，探索了HA增强PHBV使之适于作为骨修复材料的一种新途径。结果表明，HA的均匀分散增进了复合材料中两相问的相互结合，能明显地提高复合材料的力学性能。     

四苯基卟啉铂电致发光性能的研究

四苯基卟啉铂(PtTPP)可以作为红光掺杂材料制备有机电致发光器件，采用的器件结构为[ITO／CuPc／NPB／BePP2：PtTPP／LiF／Al]，其中BePP2：PtTPP的共沉积膜作为发射层．实验结果表明在发射层中存在着从BePP2到PtTPP的能量传递．通过改变掺杂层中PtTPP的浓度来考察器件的性能，当PtTPP的掺杂浓度在8％(物质的量比)时，器件呈现纯正的红光发射，发射峰位于668nm，器件的效率为0．004lm／W．     

Pd（OAc）2／FePc催化环己烯氧化合成环己酮的研究

考察了几种Ｆｅ－大环配合物与Ｐｄ（ＯＡｃ）２组成的双组分催化体系，在乙腈酸性水溶液中环己烯经合成环己酮的催化活性，实验结果表明，其中以酞菁失（ＦｅＰｃ）与Ｐｄ（ＯＡｃ）２组成的催化体系活性最高，而ＦｅＴＰＰＣｌ与Ｐｄ（ＯＡｃ）２催化体系，虽然催化活性较高，但催化剂的稳定性较低，各种因素对Ｐｄ（ＯＡｃ）２／ＦｅＰｃ催化活催化影响的研究结果指出，在无水和酸存在的非水溶液中，Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对     

N-(p-乙烯氧基苯基)咔唑的合成和聚合

本文是含咔唑化合物及其聚合物系列研究的一部分,以对-溴苯酚为原料,经过乙烯基醚化,再同咔唑反应、合成了新的单体,N-(p-乙烯氧基苯基)咔唑(NEOPC),经过元素分析、NMR和IR等对NEOPC进行分析鉴定,研究了它的聚合行为。     

3-取代-(1H)-嘧啶[1,2-α]喹啉-1-酮和2-取代嘧啶[1,2a]苯骈咪唑-4-(10H)-酮的简便合成法

丙二酸亚异丙酯及乙烯基硫代缩酮均是重要的有机合成试剂。而新近开发的5-(双甲硫基亚甲基)丙二酸亚异丙酯(1)既具有丙二酸亚异丙酯的环状结构,又具有乙烯基硫代缩酮的结构特征,它是一种多功能新的合成试剂。其最重要的性质是它可与多种亲核试剂发生加成反     

~1H MAS NMR characterization of hydrogen over silica-supported rhodium catalyst

Hydrogen species in both SiO2 and Rh/SiO2 catalysts pretreated in different atmospheres (H2, O2, helium or air) at different temperatures (773 or 973 K) were investigated by means of 1H MAS NMR. In SiO2 and O2-pretreated catalysts, a series of downfield signals at -7.0, 3.8-4.0, 2.0 and 1.5-1.0 were detected. The first two signals can be attributed to strongly adsorbed and physisorbed water and the others to terminal silanol (SiOH) and SiOH under the screening of oxygen vacancies in SiO2 lattice, respectively. Besides the above signals, both upfield signal at -110 and downfield signals at 3.0 and 0.0 were also detected in H2-pretreated catalyst, respectively. The upfield signal at -110 originated from the dissociative adsorption of H2 over rhodium and was found to consist of both the contributions of reversible and irreversible hydrogen. There also probably existed another dissociatively adsorbed hydrogen over rhodium, which was known to be p hydrogen and in a unique form of "delocalized hydrogen". It wa     

聚丙烯-聚乙烯嵌段共聚物的分子结构及性能的研究

本工作用核磁共振(~(13)C-NMR)、示差扫描量热(DSC)、动态力学分析(DMA)和扫描电子显微镜(SEM)等技术研究了将丙烯、乙烯单体两步分段共聚、预期为聚丙烯-聚乙烯嵌段共聚物的合成物(简称为聚丙烯-聚乙烯嵌段共聚物或嵌段共聚物)。结果表明,在嵌段共聚物中含有一定量的、能为正庚烷抽提出来的乙丙无规共聚物(EPR);分段共聚的产物并非预想的PP-b-PE两嵌段共聚物,而是含有多种组分的共混物;形态表征的结果表明了嵌段共聚物为多相体系,EPR和PE形成分散相以球形无规分布于PP基体中。