Direct electrosynthesis of halo and mixed-halo complexes of palladium(II and IV) by the dissolution of a sacrificial palladium anode in aqueous medium

A rapid single-step method for the electrosynthesis of chloro and bromo complexes of palladium(II and IV), viz. M₂[PdX₄] and M₂[PdX₆], by the dissolution of a palladium anode in chloride or bromide containing media is described. Electrolysis of dilute HX solution in the presence of pyridine, 2,2′-bipyridyl or 1,10-phenanthroline gives rise to non-electrolytes, e.g. trans-[PdX₂(py)₂], [PdX₂(bipy)] and [PdX₂(phen)]. Anodic oxidation of palladium in HX medium in the presence of acetonitrile and benzonitrile also gives the non-electrolytes trans-[PdX₂(CH₃CH₂NH₂)₂] and trans-[PdX₂(C₆H₅CH₂NH₂)₂], respectively.     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Study of the surface electromigration of In on Si(111) surfaces by the use of micro-electron-beams

The surface electromigration (SE) of ultrathin In films on Si(111)4 × 1-In surfaces has been investigated using experimental techniques based on μ-electron beams. On the basis of the finding that the SE velocity enhances as the strength of the electrostatic field (EF) fed through the substrate enhances, it is strongly suggested that the driving force of SE is an EF rather than a DC current fed through the substrate. It is found that a patch of ultrathin In film changes to an In patch of 1 × 1 periodicity during SE which is accompanied by spotty parts (named fine-polygons) at both the cathode and anode sides of the In patch. It is found that the fine-polygons are created at the cathode side and are stationary but grow in size to be eventually incorporated into the In-patch. A few In-islands are found on the cathode side of the In-patch and they show no translation but cycles of appearance, growth, decay, and disappearance during SE, by which mass-transportation is achieved. A plausible microscopic model for the SE is presented based on these findings.     

Thick grids with circular apertures: A comparison of theoretical and experimental performance

In this paper a comparison between a rigorous electromagnetic model for transmission through a hexagonal array of circular waveguides in a series of thick, metallic screens and experimental measurements in the far infrared is made. It is found that there is excellent agreement between theory and experiment when the frequency is below that where any diffracted orders propagate. The agreement is still very good above this frequency. Below a frequency approximately equal to the cut-off frequency of the circular waveguides little power is transmitted. As the thickness of the screen is increased, this decrease in transmission becomes more abrupt. Also, for thick screens, resonances appear in the transmission spectrum which are analogous to those which appear in the spectra of two grids separated by a distance comparable to the wavelength of the radiation being used.     

ICTS measurements for p-GaN Schottky contacts

High-temperature isothermal capacitance transient spectroscopy (H-ICTS) measurements were conducted to characterize near mid-gap defects, which are the origin of the memory effect in Ni/p-GaN Schottky contacts. A large single peak was detected only under the forward bias conditions. This indicates that the defects were located in the vicinity of the interface. The change of the peak height and position of the ICTS curves under various bias conditions were qualitatively interpreted by the distribution of the defects and the current flow effect.     

A global optimization design for quasi-optics power combiner of 3mm wave solid-state sources

This paper describes a global optimization design for quasi-optics power combiner of solid-state millimeter-wave sources. The operating frequency is about 100 GHz and the oscillating sources are GaAs Gunn diodes. The source-array plane is a matrix consisting of NxN (N=3,5, ..., 2k+1, where k is positive integer) diodes. The radio frequency power of the combiner is from threefold to sevenfold larger than the sum total of the single diodes power. The global optimums of the array and the location in the cuvity of the suorce-array plane will be given by a global optimizition method.     

GS-221高速摄影测量仪测角信息的采集与处理

在GS-221高速摄影测量仪中,测角信息采集与处理速度的快慢是重要性能指标之一。本文讨论了如何在尽可能短的时间内对测角信息进行采集和处理的软件实现方法。     

Three New Diarylpropanes from Dioscorea composita

Three new diarylpropanes were isolated from the dried rhizomes of Dioscorea composita Hemsl., and their structures were determined as 1, 3-bis-(2-hydroxy-4-methoxyphenyl) propane (1), 1, 3-bis-(2, 4-dihydroxyphenyl)propane (2), 1-(2′-hydroxy-4′-O-β-D- glucopymnosy-phenyl)-3-(2“, 4“-dihydroxyphenyl)propane (3), by spectroscopic analysis, respectively.     

耦合模模型的峰峰值与有效值

介绍了峰峰值和有效值的偶合模方程,给出了峰峰值P矩阵和有效值P矩阵的表达式。利用峰峰值P矩阵和有效值P矩阵模拟了纵向耦合谐振结构以及阻抗元结构的声表面波滤波器的频响。对比两种P矩阵的模拟结果,说明了峰峰值耦合模方程和有效值耦合模方程分析频响的等效性。