准直孔法改善束流品质初探

本文提出了用准直孔结合调节束流导引磁场获得较好品质强流电子束的方法,运用该方法在1.5MeV直线感应加速器(LIA)进行了试验,结果准直束流前后沿明显减小,束亮度提高几倍;同时,用此方法测出了束密度及束亮度的径向分布.     

OSCILLATION OF A FORCED SECOND ORDER NONLINEAR EQUATION

ＯＳＣＩＬＬＡＴＩＯＮ ＯＦ Ａ ＦＯＲＣＥＤ ＳＥＣＯＮＤ ＯＲＤＥＲ ＮＯＮＬＩＮＥＡＲ ＥＱＵＡＴＩＯＮ ￥ＫＯＮＧＱＩＮＧＫＡＩ；ＺＨＡＮＧＢＩＮＧＧＥＮＡｂｓｔｒａｃｔ：Ｔｈｉｓｐａｐｅｒｇｉｖｅｓｓｅｖｅｒａｌｃｒｉｔｅｒｉａｏｎｔｈｅｏ...     

Analysis of the Coaxial Ridge-Loaded Helical Groove Waveguide

The coaxial ridge-loaded helical groove waveguide is proposed in this paper. As an all-metal slow-wave circuit, it has advantages of good heat dissipation and great size, and thus is suitable for use of millimeter TWT. By means of field theory, the expressions of the dispersion equation and the coupling impedance of the coaxial ridge-loaded helical groove waveguide are obtained. The influence of various circuit dimensions on the dispersion relation and the coupling impedance is investigated by the results of numerical computation.     

Physico-Chemical Characterization of Yu Guo Beads(1100-771 B. C. ) in China

When was the earliest glass produced in China? This has still been a question so far. Some archaeologists have thought that Yu Guo beads are real glass, the earliest glass(1100-771 B. C. ) in China. However, more details of scientific investigations in this paper show that Yu Guo beads are mainly made of clastic quartz (>95%) with a small amount of clay and sintered under the low temperature(500-600℃). It is not a glassy body, but a kind of polycrystal ornaments.     

木犀科植物花粉的扫描电镜研究

植物花粉的形态特征具有种属特异性。本文用扫描电子显微镜观察了木犀科(Oleaceae)的六属八种植物花粉的形态特征。结果表明,除迎春有个别四萌发沟外,其它花粉都是三沟型,外壁纹饰均为网状。但各种植物花粉的细微形态仍有明显差异。因此,用扫描电镜观察研究植物花粉的亚微形态特征,可为植物分类提供一些必要的形态依据。     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。     

Radix-4 Vectoring CORDIC Algorithm and Architectures

In this work we extend the radix-4 CORDIC algorithm to the vectoring mode (the radix-4 CORDIC algorithm was proposed recently by the authors for the rotation mode). The extension to the vectoring mode is not straightforward, since the digit selection function is more complex in the vectoring case than in the rotation case; as in the rotation mode, the scale factor is not constant. Although the radix-4 CORDIC algorithm in vectoring mode has a similar recurrence as the radix-4 division algorithm, there are specific issues concerning the vectoring algorithm that demand dedicated study. We present the digit selection for nonredundant and redundant arithmetic (following two different approaches: arithmetic comparisons and table look-up), the computation and compensation of the scale factor, and the implementation of the algorithm (with both types of digit selection) in a word-serial architecture. When compared with conventional radix-2 (redundant and non-redundant) architectures, the radix-4 algorithms present a significant speed up for angle calculation. For the computation of the magnitude the speed up is very slight, due to the nonconstant scale factor in the radix-4 algorithm.     

超声波在多糖降解及提取中的应用

本文支综合介绍了超声波在多糖降解和提取中应用的研究进展．着重对超声波在淀粉，壳多糖，细菌多糖的降解和真菌多糖的提取中的应用作了较详细的阐述．     

本征吸除硅片特性研究

本文描述硅本征吸杂片的特性参数,如吸除区宽度、洁净度,氧沉淀密度、MOS电容寿命,介绍了表面态密度及残余间隙氧浓度的检测方法和工艺对参数的影响及参数之间的内在联系,文章还实验论证了不同参数水平对器件成品率的影响,建立了以MOS电容寿命为主导的参数控制方法,利用本文提供的控制参数,可使CCD-512器件成品率达60％,以上优品率≥85％。