Reduction of Dislocations in GaN Epilayer Grown on Si （111） Substrates using a GaN Intermedial Layer

GaN intermedial layers grown under different pressures are inserted between GaN epilayers and AIN/Si（111） substrates. In situ optical reflectivity measurements show that a transition from the three-dimensional （3D） mode to the 2I） one occurs during the GaN epilayer growth when a higher growth pressure is used during the preceding GaN intermedial layer growth, and an improvement of the crystalline quality of GaN epilayer will be made. Combining the in situ reflectivity and transmission electron microscopy （TEM） measurements, it is suggested that the lateral growth at the transition of growth mode is favourable for bending of dislocation lines, thus reducing the density of threading dislocations in the epilayer.     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

三角B-B曲面在非结构网格生成中的应用

基于生成非结构化网格的Delaunay三角形化方法,应用三次三角Bernstein-Bézier曲面来控制网格点的分布情况。对于给定边界,利用三次非均匀B样条进行边界的拟合及重新离散。对初始化形成的Delaunay三角形,应用三次三角Bernstein-Bézier曲面来计算位于其中的点的长度标尺,通过对三角Bernstein-Bézier曲面边界点的定义来控制三角形内长度标尺的分布。对复杂通道网格剖分的实例表明,此方法可以很好地控制内部网格点的分布情况。     

Dependence of surface morphology of CVD diamond films on deposition conditions

ＤｅｐｅｎｄｅｎｃｅｏｆｓｕｒｆａｃｅｍｏｒｐｈｏｌｏｇｙｏｆＣＶＤｄｉａｍｏｎｄｆｉｌｍｓｏｎｄｅｐｏｓｉｔｉｏｎｃｏｎｄｉｔｉｏｎｓＹＡＮＧＧｕｏｗｅｉ（Ｄｅｐｔ．ｏｆＰｈｙｓ．，ＸｉａｎｇｔａｎＵｕｉｖｅｒｓｉｔｙ，Ｘｉａｎｇｔａｎ４１１１０５...     

800nm激光泵浦掺Nd^3＋的氟化物玻璃光纤正向双程超荧光分析

从实验上探讨了掺Ｎｄ＾３＋的氟化物玻璃光纤正向双程超荧光基本特性，包括输入－输出特性、输出－带宽特性以及输出－波长（激发）特性。并给出了理论上的拟合公式，实验表明利用氟化物玻璃光纤有望获得性能优异的有应用前景的低相干度集成化光源。     

植被散射实验数据的特性分析

本文根据电波所获取的各种樾 射实测数据，分析了它们对不同极化波的响应特性。     

Microwave-Assisted Soluble Polymer-supported Synthesis of Peptoids

Libraries of peptide-like compounds are attractive sources of binding agents for proteomics applications. The synthesis of oligomeric combinatorial libraries of peptidomimetics is usually more straightforward than the creation of large libraries of more "drug-like" molecules. Herein we report synthesis of peptoids on soluble high loading Noncross-linked polystyrene. The synthesis route consists of: (a) preparation "soluble wang resin" from non-crosslinked polystyrene and 4-hydroxybenzyl alcohol via ether linkage, (b) an esterification step performed by the addition of bromoacetyl bromide to "soluble wang resin" and (c) a nucleophilic displacement of bromide with a primary amine.     

Novel Poly（thienylene Ethynylene）s with Electron-accepting Groups

Since the early works of A. J. Heeger, A G. MacDiarmid and Hideki Shirakawa on semiconducting polymers, π-conjugated oligomers and polymers have been actively investigated for a variety of optoelectronic applications, such as field effect transitors (FET…