聚硅氧烷聚脲多嵌段共聚物中氢键的研究

采用多种手段研究了聚硅氧烷与聚脲嵌段共聚物中所存在的各类氢键．特别探讨在聚硅氧烷软段中引入极性氰丙基对体系成氢键能力的影响和两相间相互作用力的情况结果表明，在软段分子中引入极性氰丙基有利于增加聚硅氧烷分子与聚脲链段的相互作用，这一相间作用力使两相间界面层厚度随着硬段分子量的增加而加宽，并发现在聚硅氧烷聚脲嵌段共聚物中硬段的聚集形态随溶液浓度改变变化不大，其中氢键随着温度升高而下降．     

Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membrane with isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. The pH-responsive ion recognition of the modified electrode was investigated by use of some neurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.     

羟基中环二胺接枝壳聚糖的合成与表征

以具有环氧活性基的壳聚糖与3-羟基-1，5-二氮杂环庚烷或3-羟基1，5-二氮杂环辛烷反应，合成了两种含羟基的氮杂冠醚壳聚糖衍生物，其组成及结构经元素分析，IR，X-射线粉末衍射及^13C NMR等方法确证。     

靛红掺杂聚吡咯膜修饰电极的电荷传输

利用交流阻抗法研究了靛红掺杂聚吡咯膜内的电荷传输，通过非线性最小二乘法拟合，得出了体系的等效电路，并计算出其电荷扩散系数和异相电子传递反应速率常数。实验结果表明，随着膜厚的增加，活性点增多，异相电子传递反应速率常数增大，同时表观扩散系数也增大。     

热喷雾作为电感耦合等离子体原子发射光谱的进样技术

设计并建立了热喷雾器及其去溶装置。用热喷雾作为电感耦合等离子体原子发射光谱的进样技术，并对其性能作了系统研究。与气动雾化器比较，对２３个元素检出限的改善为５￣２０倍。     

碳十八键合锆胶固定相的制备与色谱性能评价

用诱导聚合胶体凝聚法（PICA）制得的二氧化锆微球与碳十八三乙氧基硅烷反应制备了碳十八键合锆胶固定相（ODZ），评价了该柱填料的色谱性能，并用此固定相分离了中性和碱性化合物。     

[Ni(en)3]4[HVⅣ12VⅤ6O42(PO4)]复合物的合成及晶体结构

A new complex [Ni(en)₃]₄[HV^Ⅳ₁₂V^Ⅴ₆O₄₂(PO₄)] has been hydrothermally synthesized and characterized by X-Ray diffraction, IR and Elemental analysis. Single crystal X-ray analysis indicates that this compoud crystallizes in cubic system,space group Im 3m with a=17.4081(2)?, V=5275.38(10)?³, R=0.0420, wR=0.1055, Z=2, D_c=1.663g·cm^-3, μ=2.297mm^-1, F(000)=2636. The crystal structure consists of [Ni(en)₃]²⁺ cations and {HV₁₈O₄₂(PO₄)}^8- cluster anion which construct from 18 {VO₅} square pyramids. The VO₅ pyramids joined each other to form a {V₁₈O₄₂} cage hosting a tetrahedral {PO₄}^3- moiety with disordered oxygen atoms. CCDC: 185574.     

有机锆交联剂的制备及其性能

随着油田深部调剖应用的不断推广，以及环保要求的提高，适用于深部调剖调驱体系的低污染有机锆交联剂逐渐受到关注。以ZrOCl₂·8H₂O、乳酸、乙二胺、硫脲为原料，制备了有机锆交联剂和HPAM-锆交联凝胶，其结构和性能经SEM和岩心驱替装置表征。并利用正交实验法优化了制备条件。结果表明：制备有机锆交联剂的最佳条件为：氧氯化锆、乳酸、乙二胺及硫脲的质量比为7.8/1/6.7/5，反应温度为70 ℃，反应时间为3 h。交联温度为60 ℃，HPAM浓度为2 g·L^-1、聚锆比为30/1时，聚合物凝胶成胶强度达到24968 mPa·s，成胶时间约8 h，凝胶体系可维持90 d不破胶。在级差为3.9的双管驱替岩心实验中，两管的岩心分流率均接近50%，剖面改善率达到66.77%。     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

聚酰亚胺LB膜热解制备SiC薄膜的XPS研究

用XPS对沉积在硅基片上的聚酰亚胺LB膜以及由它真空热解制备的SiC薄膜进行了研究 ,并对其形成过程进行了跟踪分析 .XPS结果显示聚酰亚胺LB膜结构均匀 ,质量良好 ;真空热解时 ,约在 6 70℃时LB膜中的C与衬底Si反应形成SiC ;Ar离子溅射深度俄歇谱表明所制备的SiC膜中Si和C浓度成梯度分布 ,说明SiC是由Si和C相互扩散反应形成的