[110]-surface strained-SOI CMOS devices

We have newly developed [110]-surface strained-silicon-on-insulator (SOI) n- and p-MOSFETs on [110]-surface relaxed-SiGe-on-insulator substrates with the Ge content of 25%, fabricated by applying the Ge condensation technique to SiGe layers grown on [110]-surface SOI wafers. We have demonstrated that the electron and the hole mobility enhancement of [110]-surface strained-SOI devices amounts to 23% and 50%, respectively, against the mobilities of [110]-surface unstrained MOSFETs. As a result, the electron and the hole mobility ratios of [110]-surface strained-SOI MOSFETs to the universal mobility of (100)-surface bulk-MOSFETs increase up to 81% and 203%, respectively. Therefore, the current drive imbalance between n- and p-MOS can be reduced. Moreover, both the electron and the hole mobilities of the [110]-surface strained-SOIs strongly depend on the drain current flow direction, which is qualitatively explained by the anisotropic effective mass characteristics of the carriers on a [110]-surface Si. As a result, the [110]-surface strained-SOI technology with optimization of the current flow directions of n- and p-MOS is promising for realizing higher speed scaled CMOS.     

Laser coupling to single-mode fibre using graded-index lenses and compact disc 1.3 ?m laser package

A 1.3 ?m laser in a compact disc package is coupled to single-mode fibre using two graded-index lenses in a nearly confocal scheme. An increase in the alignment tolerance at the lens-lens interface by a factor of six suggests the design for a potentially very low-cost connectorised laser package. The coupling efficiency of approx. 6% (?12 dB) is shown to be adequate for local loop applications.     

Finite-difference time-domain analysis and experimental examinationof the performance of a coupled-cavity MQW laser/active waveguide at1.54 μm

The performance characteristics of a coupled cavity InGaAsP-InP MQW laser/active waveguide made by one-step epitaxy and well-controlled reactive ion etching (RIE) have been theoretically analyzed and experimentally determined. A theoretical model based on a finite-difference time-domain (FDTD) technique was used to simulate the propagation of an optical wave launched in the coupled system and determine the reflectivity of the facets created by RIE. The calculated effective reflectivity of the coupling region consisting of two facets and an air gap is between 0.45 and 0.55, which is in good agreement with the experimentally measured value of 0.5. The reflectivity of a single etched mirror derived from this value is estimated to be 0.3. A 120-μm-long monolithically integrated active waveguide when biased as a modulator and excited by the laser shows a maximum extinction ratio of 8 dB and a modulation bandwidth ⩾14 GHz at a dc bias of -0.5 V with a bias swing of 2 V     

Multiterminal light-emitting logic device electricallyreprogrammable between OR and NAND functions

A monolithic multiterminal logic device that functions both optically and electrically as an ORNAND gate, is demonstrated for the first time. The device, based on the real-space transfer of hot electrons into a complementary collector layer, has been implemented in an InGaAs/InAlAs/InGaAs heterostructure grown by molecular beam epitaxy. Excellent performance is obtained at room temperature. The collector current and the optical output power both exhibit the OR and the NAND functions of any two of the three input terminals, these functions being interchangeable by the voltage on the third terminal     

Singular value decomposition-based MA order determination ofnon-Gaussian ARMA models

Singular-value-decomposition (SVD)-based moving-average (MA) order determination of non-Gaussian processes using higher-order statistics is addressed. It is shown that the MA order determination of autoregressive moving-average (ARMA) models is equivalent to the rank determination of a certain error matrix, and a SVD approach is proposed. Its simplified form is applied to pure MA models. To improve the robustness of the order selection, a combination of the SVD and the product of diagonal entries (PODE) test is proposed. Some interesting applications of the two SVD approaches are presented, and simulations verify their performance     

WKB近似下的Fourier衍射成象方法

对于介质目标微波衍射成象，本文引入了ＷＫＢ近似来模拟目标内部总场。基于这种近似，我们导出了Ｆｏｕｒｉｅｒ衍射公式，并采用了广义滤波逆传播方法由目标空间谱实现目标特性的重建。计算机模拟结果表明采用ＷＫＢ近似重建目标特性较Ｂｏｒｎ近似有明显改善。     

Efficient third-harmonic generation of a picosecond laser pulsewith time delay

A new configuration based on the polarization-mismatching scheme with time delay for efficient frequency tripling conversion is proposed in this paper. The calculated results showed that the requirement for the efficient frequency tripling conversion of a 1-ps laser pulse is not only the optimization of peak intensity of the second-harmonic pulse, but also the optimization of the pulse duration ratio and temporal difference between the o-polarization second-harmonic pulse and the e-polarization first-harmonic pulse due to group-velocity mismatch among the interacting pulses. With the proposed scheme the group velocity mismatch can be compensated. Overall energy conversion efficiency increases from 55% to 75% under the optimized conditions at the intensity of 6 GW/cm². The temporal shape of the third-harmonic pulse with 1 ps pulse duration has no subpulses. The optimization of the efficient frequency tripling conversion for intensities of over 75 GW/cm² is also described. The results showed that the maximum tripling energy conversion efficiency is close to 80% with the optimized doubler and tripler     

Globally convergent edge-preserving regularized reconstruction: anapplication to limited-angle tomography

We introduce a generalization of a deterministic relaxation algorithm for edge-preserving regularization in linear inverse problems. This algorithm transforms the original (possibly nonconvex) optimization problem into a sequence of quadratic optimization problems, and has been shown to converge under certain conditions when the original cost functional being minimized is strictly convex. We prove that our more general algorithm is globally convergent (i.e., converges to a local minimum from any initialization) under less restrictive conditions, even when the original cost functional is nonconvex. We apply this algorithm to tomographic reconstruction from limited-angle data by formulating the problem as one of regularized least-squares optimization. The results demonstrate that the constraint of piecewise smoothness, applied through the use of edge-preserving regularization, can provide excellent limited-angle tomographic reconstructions. Two edge-preserving regularizers-one convex, the other nonconvex-are used in numerous simulations to demonstrate the effectiveness of the algorithm under various limited-angle scenarios, and to explore how factors, such as the choice of error norm, angular sampling rate and amount of noise, affect the reconstruction quality and algorithm performance. These simulation results show that for this application, the nonconvex regularizer produces consistently superior results.     

Implementation of media processors

Conventional standard processors do not correspond well to the characteristics of multimedia signal processor algorithms. Therefore, special architectural approaches are necessary for multimedia processors to deliver the required high processing power with efficient use of hardware resources. Programmable approaches offer a high degree of flexibility. In order to attain multimedia signal processor performance, architectural strategies for programmable processors are based on parallelization and adaptation principles. The future multimedia signal processor implementation hinges upon an optimal trade-off between the two design spaces, which can be effectively addressed by a codesign approach     

Systolic array implementation of block LMS algorithm

The authors derive the systolic array implementation of the block LMS algorithm, consisting of N processing elements, where N is the filter order. The resulting array attains an order-independent sampling rate. Computer simulation results show that the block LMS algorithm is faster than the delayed LMS algorithm, which has previously been implemented on systolic arrays