Reliability investigation of 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel

The authors have investigated the reliability performance of G-band (183 GHz) monolithic microwave integrated circuit (MMIC) amplifiers fabricated using 0.07-/spl mu/m T-gate InGaAs-InAlAs-InP HEMTs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel on 3-in wafers. Life test was performed at two temperatures (T/sub 1/ = 200 /spl deg/C and T/sub 2/ = 215 /spl deg/C), and the amplifiers were stressed at V/sub ds/ of 1 V and I/sub ds/ of 250 mA/mm in a N/sub 2/ ambient. The activation energy is as high as 1.7 eV, achieving a projected median-time-to-failure (MTTF) /spl ap/ 2 /spl times/ 10/sup 6/ h at a junction temperature of 125 /spl deg/C. MTTF was determined by 2-temperature constant current stress using /spl Delta/G/sub mp/ = -20% as the failure criteria. The difference of reliability performance between 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel and 0.1-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with In/sub 0.6/Ga/sub 0.4/As channel is also discussed. The achieved high-reliability result demonstrates a robust 0.07-/spl mu/m pseudomorphic InGaAs-InAlAs-InP HEMT MMICs production technology for G-band applications.     

Improvement of AlGaInP light emitting diode by sulfide passivation

The brightness of AlGaInP light emitting diodes (LEDs) has been raised by a factor of 1.12 at 20 mA by sulfide passivation. Meanwhile, the sulfide also can decrease leakage current of AlGaInP LEDs at -2 V to nearly one thousandth of that in the as-fabricated device. The possible causes for the brightness increase of AlGaInP LEDs after sulfide treatment including surface roughness, reduction of Fresnel loss, and effective injection of carriers were demonstrated.     

Z-transform implementation of the perfectly matched layer for truncating FDTD domains

A simple algorithm for implementing the perfectly matched layer (PML) is presented for truncating finite difference time domain (FDTD) computational domains. The algorithm is based on incorporating the Z-transform method into the PML FDTD implementation. The main advantage of the algorithm is its simplicity as it allows direct FDTD implementation of Maxwell's equations in the PML region. In addition, the formulations are independent of the material properties of the FDTD computational domain. Numerical examples are included to demonstrate the effectiveness of these formulations.     

Hot carrier analysis in low-temperature poly-Si thin-film transistors using pico-second time-resolved emission microscope

We have analyzed degradation of N-channel thin-film-transistor (TFT) under dynamic stress using a pico-second time-resolved emission microscope. We have successfully detected emission at pulse fall edge for the first time. Emission intensity increased with the decrease of pulse fall time. As the degradation depended on the pulse fall time, this dependence clearly illustrates that hot electrons are the dominant cause of the degradation under dynamic stress. Based on these dependences, we proposed a model considering electron traps in the poly-Si.     

Higher Stability Limits for the Symplectic FDTD Method by Making Use of Chebyshev Polynomials

A new scheme is introduced for obtaining higher stability performance for the symplectic finite-difference time-domain (FDTD) method. Both the stability limit and the numerical dispersion of the symplectic FDTD are determined by a function zeta. It is shown that when the zeta function is a Chebyshev polynomial the stability limit is linearly proportional to the number of the exponential operators. Thus, the stability limit can be increased as much as possible at the cost of increased number of operators. For example, the stability limit of the four-exponential operator scheme is 0.989 and of the eight-exponential operator scheme it is 1.979 for fourth-order space discretization in three dimensions, which is almost three times the stability limit of previously published symplectic FDTD schemes with a similar number of operators. This study also shows that the numerical dispersion errors for this new scheme are less than those of the previously reported symplectic FDTD schemes     

Analysis of transient interaction of electromagnetic pulse with an air layer in a dielectric medium using wavelet-based implicit TDIE formulation

The interaction of transient electromagnetic pulse with an air layer in a dielectric medium is formulated in terms of a time-domain integral equation and solved numerically via the method of moments. Previous related works pointed to the inherent inadequacy of the marching-on-in-time method in this case, but suggested no remedy. This paper explains why an implicit modeling scheme would work effectively in this case. It is also noted that the use of an implicit scheme would normally involve a solution of a very large and dense matrix equation. To alleviate this drawback of the implicit scheme, the use of a wavelet-based impedance-matrix-compression technique, which has facilitated in the very recent past solutions of time-domain problems with greater efficiency, is described.     

InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

LiNbO3 optical waveguides formed in a new proton source

Proton-exchanged planar waveguides have been fabricated on Z-cut and X-cut lithium niobate crystals by using a new proton source formed by a mixture of benzoic and adipic acids. Waveguide index profiles and optical characteristics have been obtained at different values of the adipic-benzoic acid concentration ratio. The samples have been structurally characterized by Raman and infrared (IR) absorption spectroscopy and double-crystal X-ray diffraction. Good quality samples have been fabricated by using 30 mol% ratio dilution, showing very low scattering levels (<0.1 dB/cm), relatively high electrooptic coefficient (r₃₃=0.88 pm/V), and low relative percentage of interstitial protons (26%). The main factor limiting the waveguide optical properties is the substitutional-interstitial proton ratio, which can be easily controlled to produce good quality waveguides. A demonstration of the repeatability of the exchange process in the acid mixture is also provided     

Scattering from and penetration into a dielectric-filled conductingcylinder with multiple apertures

The theory of characteristic modes for aperture problems is used in this paper to solve the equivalent magnetic current and aperture fields due to a conducting cylinder with multiple slots. It is assumed that these slots are illuminated by either a transverse electric (TE) or a transverse magnetic (TM) plane wave and the media inside and outside the cylinder exhibit different electromagnetic properties. The formulation is given for the general case and numerical results for a limited number of slots are presented     

An efficient optimistic message logging scheme for recoverable mobile computing systems

A number of checkpointing and message logging algorithms have been proposed to support fault tolerance of mobile computing systems. However, little attention has been paid to the optimistic message logging scheme. Optimistic logging has a lower failure-free operation cost compared to other logging schemes. It also has a lower failure recovery cost compared to the checkpointing schemes. This paper presents an efficient scheme to implement optimistic logging for the mobile computing environment. In the proposed scheme, the task of logging is assigned to the mobile support station so that volatile logging can be utilized. In addition, to reduce the message overhead, the mobile support station takes care of dependency tracking and the potential dependency between mobile hosts is inferred from the dependency between mobile support stations. The performance of the proposed scheme is evaluated by an extensive simulation study. The results show that the proposed scheme requires a small failure-free overhead and the cost of unnecessary rollback caused by the imprecise dependency is adjustable by properly selecting the logging frequency.