On-chip high voltage charge pump in standard low voltage CMOS process

An on-chip high voltage tolerant 4VDD charge pump with symmetrical architecture in a standard low voltage 1.8 V 0.18 /spl mu/m CMOS process is presented. For a 250 k/spl Omega/ load, circuit efficiency of the charge pump is approximately 71%. All the MOS transistors satisfy typical voltage stress related reliability requirements for standard low voltage CMOS devices.     

Conduction band states of transition metal (TM) high-k gate dielectrics as determined from X-ray absorption spectra

This paper uses X-ray absorption spectroscopy to study the electronic structure of the high-k gate dielectrics including TM and RE oxides. The results are applicable to TM and rare earth (RE) silicate and aluminate alloys, as well as complex oxides comprised of mixed TM/TM and TM/RE oxides. These studies identify the nature of the lowest conduction band d^* states, which define the optical band gap, E_g, and the conduction band offset energy with respect to crystalline Si, E_B. E_g and E_B scale with the atomic properties of the TM and RE atoms providing important insights for identification high-k dielectrics that meet performance targets for advanced CMOS devices.     

Bias dependence of high-frequency noise in heterojunction bipolar transistors

Hawkins' isothermal model developed to study noise in bipolar junction transistors (BJTs) is modified to investigate bias-dependent noise in heterojunction bipolar transistors (HBTs) by incorporating thermal effects. It is shown that the inclusion of thermal effects into the high-frequency noise model of HBTs is necessary as the temperature of the device may become very different from the ambient temperature, especially at high bias current. Calculation of the noise figure by including the thermal effect shows that the isothermal calculation may underestimate the noise figure at high bias current. It is observed that noise at low bias is ideality factor n dependent whereas high bias noise is insensitive to the variation of n. Moreover, the common base current gain plays a major role in the calculation of the minimum noise figure. The excellent fit obtained between the theoretical calculation and the measured data are attributed to the inclusion of the bias-dependent junction heating as well as C/sub De/ and C/sub bc/ into the present calculation.     

Synthesis and crystal structure of the octahedral cluster complex [Th(DMSO)8Cl][Re6Se7Cl7]

A cluster complex of the composition [Th(DMSO)₈Cl][Re₆Se₇Cl₇] has been obtained by interaction of ThCl₄ solution in DMSO with a water solution of K₃[Re₆Se₇Cl₇] and KCl. The compound crystallizes in the rhombic space group Pbcm with unit cell parameters a = 12.262(2) Å, b = 19.653(6) Å, c = 23.603(6) Å, V = 5688(2) ų, Z = 4, d _calc = 3.282 g/cm³. The structure is built from centrosymmetric cluster anions [Re₆Se₇Cl₇]^3? and complex cations [Th(DMSO)₈Cl]³⁺ possessing mirror-plane symmetry, half of the DMSO ligands being doubly disordered.     

On Striping Traffic over Multiple IEEE 802.11(b) Wireless Channels

Due to interference, path loss, multipath fading, background noise, and many other factors, wireless communication normally cannot provide a wireless link with both a high data rate and a long transmission range. To address this problem, striping network traffic in parallel over multiple lower-data-rate but longer-transmission-range wireless channels may be used. In this paper, we propose a new striping method and evaluate its performances over multiple IEEE 802.11(b) channels under various conditions. Our extensive simulation results show that this method is quite effective for such an application. S.Y. Wang is an Associate Professor of the Department of Computer Science and Information Engineering at National Chiao Tung University, Taiwan. He received his Master and Ph.D. degree in computer science from Harvard University in 1997 and 1999, respectively. His research interests include wireless networks, Internet technologies, network simulations, and operating systems. He is the author of the NCTUns 2.0 network simulator and emulator, which is being widely used by network and communication researchers. More information about the tool is available at http://NSL.csie.nctu.edu.tw/nctuns.html. C.H. Hwang received his master degree in computer science from NCTU in 2002 and currently is working for a network company. C.L. Chou currently is a third-year Ph.D. student at the Department of Computer Science and Information Engineering, National Chiao TungUniversity (NCTU), Taiwan. He received his master degree in computer science from NCTU in 2002.     

Intermittent Phenomena in Switched Systems With High Coupling Strengths

In this paper, one kind of intermittency generated by a discontinuous system is studied. Although this system, which is composed of two switched subsystems coupled with a high strength, is nonsmooth, the mechanism of this kind of intermittency can be analyzed with several explicit relations between the intermittency characteristics and the system control parameters. In particular, estimates of "steady-state" values of the system (in the laminar phases) and a critical value for this intermittency can be derived, which are helpful in relevant control systems design. Moreover, some power laws for the observed intermittency are obtained and discussed     

The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

Thermally Induced Viscous Flow of Borophosphosilicate-Glass Thin Films on Stepped Surfaces,Part 2: Generalized Parameters for ULSI Glass Flow Characterization

New flow parameters termed flow effectiveness andthermal budgetare used for the characterization of the thermal flow of borophosphosilicate glass serving as a premetal dielectric in ULSI circuits. Their practical value is discussed. It is concluded that the approach proposed reduces the cost of measurement, facilitates the interpretation of measured data, works for both furnace and rapid thermal annealing, is applicable to ULSI gap filling as well as glass planarization, and enables one to optimize the annealing temperature for thin films of low-fusible multicomponent glasses.