Microstructure of a-SiOx:H

A set of a-SiO_x:H (0.52 <x< 1.58) films are fabricated by plasma-enhanced-chemical-vapor-deposition (PECVD) method at the substrate temperature of 250°C. The microstructure and local bonding configurations of the films are investigated in detail using micro-Raman scattering, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It is found that the films are structural inhomogeneous, with five phases of Si, Si₂O:H, SiO:H, Si₂O₃:H and SiO₂ that coexist. The phase of Si is composed of nonhydrogenated amorphous silicon (a-Si) clusters that are spatially isolated. The average size of the clusters decreases with the increasing oxygen concentration x in the films. The results indicate that the structure of the present films can be described by a multi-shell model, which suggests that a-Si cluster is surrounded in turn by the subshells of Si₂O:H, SiO:H, Si₂O₃:H, and SiO₂.     

Phonon–replica transitions in InGaN/GaN quantum well structures

A side-bump feature in a photoluminescence (PL) spectrum of an InGaN compound was widely observed. With reasonable fitting to PL spectra with three Gaussian distributions, the temperature variations of the peak positions, integrated PL intensities, and peak widths of the main and first side peaks of three InGaN/GaN multiple quantum well samples with different nominal indium contents are shown and interpreted. The existence of the side peaks is attributed to phonon–replica transitions. The variations of the peak position separations and the decreasing trends of the first side peak widths beyond certain temperatures in those samples were explained with the requirement of phonon momentum condition for phonon–replica transitions. In the sample with 25% nominal indium content, the phonon–replica transition could become stronger than the direct transition of localized states.     

Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.     

Very high coercivities of top-layer diffusion Au/FePt thin films

The Au/FePt samples were prepared by depositing a gold cap layer at room temperature onto a fully ordered FePt layer, followed by an annealing at 800 °C for the purpose of interlayer diffusion. After the deposition of the gold layer and the high-temperature annealing, the gold atoms do not dissolve into the FePt Ll₀ lattice. Compared with the continuous FePt film, the TEM photos of the bilayer Au(60 nm)/FePt(60 nm) show a granular structure with FePt particles embedded in Au matrix. The coercivity of Au(60 nm)/FePt(60 nm) sample is 23.5 kOe, which is 85% larger than that of the FePt film without Au top layer. The enhancement in coercivity can be attributed to the formation of isolated structure of FePt ordered phase.     

梯度折射率棒中传播的高斯光束轨迹解析解及其存在条件的讨论

本文提出光束轨迹方程的一般解，导出解析解的存在条件，推广了文献［１］的光线传播理论，文中以一特定梯度折射率棒为例，讨论了高斯光束在棒中的传播特性。     

用投影预变换提高自适应波束形成的稳健性

在快拍数较少和（或）存在系统误差时，自适应波束形成的性能会变差，特别是会引起方向图副瓣电平升高——波束畸变。本文提出的投影变换法利用干扰方向的初略估计，在未精确预知阵列流形的条件下，可以显著改善自适应方向图的副瓣性能，并提高自适应算法的收敛性，计算机仿真结果验证了这一优点。     

Credit-based slot allocation for multimedia mobile ad hoc networks

This paper studies resource management for multimedia mobile ad hoc networks (MANET). In particular, we focus on providing fair scheduling with quality-of-service (QoS) support for MANET. We consider two types of flows: guaranteed and best effort flows. The goal is to satisfy the QoS requirements of guaranteed flows and to provide global fairness for best effort flows. In this paper, a credit-based fair scheduling mechanism called credit-based slot allocation protocol (CSAP) is proposed. In CSAP, nodes are logically grouped into clusters, each with a scheduler. Each scheduler assigns time slots to nodes in its cluster based on the first tier algorithm. The node scheduled to send at the next time slot then in turn assigns the time slot to a relayed flow determined by the second-tier algorithm. Each multihop flow is treated as multiple single-hop flow segments. These segments are then correlated such that a downstream segment will not be allocated a slot unless the upstream segments have all been allocated. We evaluate the performance of CSAP by simulations. The results show that CSAP meets the QoS requirements of guaranteed flows, provides global fairness for best effort flows, and improves overall system throughput.     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

Surgical navigation by autostereoscopic image overlay of integral videography

This paper describes an autostereoscopic image overlay technique that is integrated into a surgical navigation system to superimpose a real three-dimensional (3-D) image onto the patient via a half-silvered mirror. The images are created by employing a modified version of integral videography (IV), which is an animated extension of integral photography. IV records and reproduces 3-D images using a microconvex lens array and flat display; it can display geometrically accurate 3-D autostereoscopic images and reproduce motion parallax without the need for special devices. The use of semitransparent display devices makes it appear that the 3-D image is inside the patient's body. This is the first report of applying an autostereoscopic display with an image overlay system in surgical navigation. Experiments demonstrated that the fast IV rendering technique and patient-image registration method produce an average registration accuracy of 1.13 mm. Experiments using a target in phantom agar showed that the system can guide a needle toward a target with an average error of 2.6 mm. Improvement in the quality of the IV display will make this system practical and its use will increase surgical accuracy and reduce invasiveness.     

应用美学原理进行愉悦式教学的尝试

由于物理学的学习难度均较大,使学生学习完全处于被动状态,如何扭转此局面呢?愉悦式教法定能如愿。1 让学生充分领略学科的美 要学好物理,首先必须对它们产生兴趣.学科安排本身就是一种美,加之论述的逻辑