一种新颖的应变Si沟道 pMOSFET制作技术

在应变Si沟道异质结场效应晶体管(HFET)制作过程中,引入分子束外延(MBE)低温Si(LT-Si)技术,大大减少了弛豫SiGe层所需的厚度.TEM结果表明,应变Si层线位错密度低于106cm-2.原子力显微镜(AFM)测试表明,其表面均方粗糙度小于1.02nm.器件测试结果表明,与相同条件下的体Si pMOSFET相比,空穴迁移率提高了25%.     

具有应变沟道及EOT 1.2nm高性能栅长22nm CMOS器件

深入研究了亚30nm CMOS关键工艺技术,特别是提出了一种新的低成本的提高空穴迁移率的技术--Ge预非晶化S/D延伸区诱生沟道应变技术,它使栅长90nm pMOS空穴有效迁移率在0.6MV/cm电场下提高32%.而且空穴有效迁移率的改善,随器件特征尺寸缩小而增强.利用零阶劳厄线衍射的大角度会聚束电子衍射分析表明,在沟道区相应的压应变为-3.6%.在集成技术优化的基础上,研制成功了高性能栅长22nm应变沟道CMOS器件及栅长27nm CMOS 32分频器电路(其中分别嵌入了57级/201级环形振荡器),EOT为1.2nm,具有Ni自对准硅化物.     

Sliding-mode MRAS speed estimators for sensorless vector control of induction Machine

This paper presents two novel sliding mode (SM) model reference adaptive system (MRAS) observers for speed estimation in a sensorless-vector-controlled induction-machine drive. Both methods use the flux estimated by the voltage model observer as the reference and construct SM flux observers that allow speed estimation. Stability and dynamics of the two proposed SM flux observers are discussed. The observers are compared with the classical MRAS observer. The proposed estimators seem very robust and easy to tune. Unlike the classical MRAS, the speed-estimation process is based on algebraic calculations that do not exhibit underdamped poles or zeros on the right-hand plane. Simulations and experimental results on a 1/4-hp three-phase induction machine confirm the validity of the approaches.     

A broad-band waveguide grating coupler with a subwavelength grating mirror

A new diffractive device for light coupling between a planar optical waveguide and free space is proposed. The device utilizes a second-order waveguide grating to diffract the fundamental waveguide mode into two free propagating beams and a subwavelength grating (SWG) mirror to combine the two free propagating beams into a single beam. The finite-difference time-domain (FDTD) simulations show that the SWG mirror improves the coupling efficiency of the waveguide fundamental mode into the single out-coupled beam from about 30% to 92%. A high efficiency (>90%) is predicted for a broad wavelength range of 1520-1580nm. The proposed device is compact (/spl sim/80 /spl mu/m in length) and it eliminates the need for blazing the waveguide grating.     

Two-stage quasi-class-E power amplifier in GaN HEMT technology

This letter presents a two-stage quasi-class-E monolithic microwave integrated circuit power amplifier at 2.0GHz, which is based on field-plated GaN high electron mobility transistor technology. It consists of a driver stage and a power stage. The circuit schematic is described. The amplifier achieves an output power of 37.5dBm into a 50-/spl Omega/ load, a power added efficiency (PAE) of 50%, and a gain of 18.2dB. A power density of 5.6W/mm is achieved.     

高压下制备的累托石/酚醛树脂复合材料微结构和热性能研究

 采用物理方法在高压下制备了酚醛树脂（PF）/累托石（REC）纳米复合材料,用X射线衍射（XRD）、透射电子显微镜（TEM）及热分析（DSC/TGA）等方法,研究了复合材料的物相、显微结构以及热学性能。结果表明,不通过层间高分子聚合反应,不预先对累托石进行有机化处理,在高压下,由聚合物分子插入粘土层间,可以形成剥离型树脂/粘土纳米复合材料,并且其热学性能发生了较大的改变。     

无机元素与计量学模型结合的半夏产地溯源研究

目的:建立不同产地半夏无机元素的分析方法和溯源体系,为半夏药材的质量控制和道地性评价提供技术支持。方法:采用电感耦合等离子体质谱法(ICP-MS)和电感耦合等离子体原子发射光谱法(ICP-AES)对我国6个主产区72份半夏样品中K、Ca、Na、Mg、Al等37种无机元素的含量进行测定,并采用方差分析、主成分分析、因子分析等计量学方法进行统计与评价。通过对比BP-神经网络算法、K-最近邻算法、最小二乘支持向量机等多种模式识别方法,探索适合半夏产地溯源的最佳模型。结果:不同产地半夏中无机元素的构成各具特征,各无机元素含量在产地间差异显著(P＜0.05),其中La、Pb、As、Na、Bi、Hg、Sn、Cd、Ag 9种元素在不同产区间的差异最为明显;3D-plots图显示不同产地半夏样品分布相对集中,具备产地分类的可行性;KNN分类模型(曼哈顿距离)是半夏产地溯源的最佳方法,测试集的正确率达到100%。结论:无机元素分析技术结合适当的计量学模型可以实现半夏的产地溯源。     

Enhancing cell membrane phase separation for inhibiting cancer metastasis with a stimuli-responsive DNA nanodevice

Phase separation in cell membranes promotes the assembly of transmembrane receptors to initiate signal transduction in response to environmental cues. Many cellular behaviors are manipulated by promoting membrane phase separation through binding to multivalent extracellular ligands. However, available extracellular molecule tools that enable manipulating the clustering of transmembrane receptors in a controllable manner are rare. In the present study, we report a DNA nanodevice that enhances membrane phase separation through the clustering of dynamic lipid rafts. This DNA nanodevice is anchored in the lipid raft region of the cell membrane and initiated by ATP. In a tumor microenvironment, this device could be activated to form a long DNA duplex on the cell membrane, which not only enhances membrane phase separation, but also blocks the interaction between the transmembrane surface adhesion receptor and extracellular matrix, leading to reduced migration. We demonstrate that the ATP-activated DNA nanodevice could inhibit cancer cell migration both in vitro and in vivo. The concept of using DNA to regulate membrane phase separation provides new possibilities for manipulating versatile cell functions through rational design of functional DNA structures.

A DNA nanodevice is developed to enhance the cell membrane phase separation in a tumor microenvironment to weaken the formation of focal adhesion. As a result, the migration of cancer cells is inhibited both in vitro and in vivo.     

Towards the rational design of Pt-based alloy catalysts for the low-temperature water-gas shift reaction: from extended surfaces to single atom alloys

The rational design of Pt-based catalysts for the low-temperature water-gas-shift (LT-WGS) reaction is an active research field because of its important role played in the fuel cell-based hydrogen economy, especially in mobile applications. Previous theoretical analyses have suggested that Pt alloys, leading to a weaker CO binding affinity than the Pt metal, could help alleviate CO poisoning and thus should be promising catalysts of the LT-WGS reaction. However, experimental research along this line was rather ineffective in the past decade. In the present work, we employed the state-of-the-art kinetic Monte Carlo (KMC) simulations to examine the influences of the electronic effect by introducing sub-surface alloys and/or core–shell structures, and the synergetic effect by introducing single atom alloys on the catalytic performance of Pt-alloy catalysts. Our KMC simulations have highlighted the importance of the OH binding affinity on the catalyst surfaces to reduce the barrier of water dissociation as the rate determining step, instead of the CO binding affinity as has been emphasized before in conventional mean-field kinetic models. Along this new direction of catalyst design, we found that Pt–Ru synergetic effects can significantly increase the activity of the Pt metal, leading to Ru_1–3@Pt alloys with a tetrahedron site of one surface-three subsurface Ru atoms on the Pt host, showing a turnover frequency of about five orders of magnitude higher than the Pt metal.

KMC simulations show that decreasing the barrier of H₂O decomposition is more beneficial than decreasing the CO binding affinity in LT-WGS, while the latter was overemphasized by MF-MKM. Here Ru_1–3@Pt alloy is proposed as a promising catalyst.     

Intramitochondrial co-assembly between ATP and nucleopeptides induces cancer cell apoptosis

Mitochondria are essential intracellular organelles involved in many cellular processes, especially adenosine triphosphate (ATP) production. Since cancer cells require high ATP levels for proliferation, ATP elimination can be a unique target for cancer growth inhibition. We describe a newly developed mitochondria-targeting nucleopeptide (MNP) that sequesters ATP by self-assembling with ATP inside mitochondria. MNP interacts strongly with ATP through electrostatic and hydrogen bonding interactions. MNP exhibits higher binding affinity for ATP (−637.5 kJ mol⁻¹) than for adenosine diphosphate (ADP) (−578.2 kJ mol⁻¹). To improve anticancer efficacy, the small-sized MNP/ADP complex formed large assemblies with ATP inside cancer cell mitochondria. ATP sequestration and formation of large assemblies of the MNP/ADP–ATP complex inside mitochondria caused physical stress by large structures and metabolic disorders in cancer cells, leading to apoptosis. This work illustrates a facile approach to developing cancer therapeutics that relies on molecular assemblies.

Mitochondria-targeting nucleopeptide (MNP) can sequester ATP by self-assembling with ATP. A small nanosized MNP/ADP complex forms a large assembly with ATP. Thus, intramitochondrial co-assembly causes stress by large structures and apoptosis.