U型管内液柱振动的演示实验研究

根据实验结果，分析了影响U型管中液柱振动的各种因素，给出了获得好的演示效果的改进措施．     

利用场发射显微镜研究O2对单壁碳纳米管场发射的影响

利用场发射显微镜和四极质谱计研究了充入高纯O2的四极质谱和O2对单壁碳纳米管场发射的影响.单壁碳纳米管经过约1000℃的热处理得到清洁态场发射像后，充入O2，分别测量了O2吸附和脱附后场发射的I V特性.实验观测到在单壁碳纳米管上O2的吸附使场发射电流减小，说明逸出功增加.在10-4Pa的O2压强下对单壁碳纳米管进行约1000℃的热处理，可以产生氧化刻蚀作用，观测到场发射像的变化，并测量了氧化刻蚀产生的I V特性变化. 关键词： 单壁碳纳米管 场发射显微镜 场发射 四极质谱     

LAXS investigation of finger phantoms

Osteoporosis is a bone condition that is caused mainly by the degradation of trabecular and cortical bone resulting in the decrease of bone strength and eventually leads to bone fracture. A low angle X-ray scattering (LAXS) system that uses mainly the coherent scattering process for the characterisation of materials was constructed to study such bone conditions. Several finger phantoms were fabricated to simulate bone of varying densities. The LAXS method was able to identify the changes in bone density quite well by comparing energy dispersive X-ray diffraction patterns as well as the angular patterns. Quantitative information can be extracted from such patterns that relate to bone loss. Signature patterns at low exposure times were produced in order to reduce the dose received with reasonable identification power but at slightly higher statistical errors compared with long exposure patterns. Use of other parameters to increase the sensitivity was attempted.     

Kirchhoff方程的相对常值特解及其Lyapunov稳定性

对于超细长弹性杆静力学的Kirchhoff方程，用动力学的概念和方法研究其常值特解 和稳定性问题.计算了Kirchhoff方程相对固定坐标系、截面主轴坐标系以及中心线Frenet 坐标系的常值特解，进行了Kirchhoff动力学比拟，用一次近似理论分别讨论了它们的Lyapu nov稳定性，导出了若干稳定性判据，并在参数平面上绘出了稳定域. 关键词： 超细长弹性杆 Kirchhoff方程 常值特解 Lyapunov稳定性     

双阳极磁控注入枪束流特性的研究

 介绍了用于34GHz基波回旋速调管的双阳极磁控注入枪的结构特点，为了准确分析磁控注入枪的束流特性，建立了阴极表面理论模型，用新编制的程序模拟了电子轨迹。模拟和测量结果显示磁场对磁控注入枪的束流有影响，磁控注入枪的束流也与阴极温度和空间电荷效应有关系。     

异质谷间转移电子器件的计算机模拟

使用弛豫时间近似求出了描述两能谷间电子交换的方程。在此基础上建立了双能谷电子的连续性方程和油松方程。对具体的ＧａＡｓ／ＡｌｘＧａ１－ｘＡｓ异质谷间转移电子器件结构求解了这些方程组，得到了直流工作时器件内的电场分布、双能谷中载流子的布居以及两个能谷的电流分布。这些结果正好和常规Ｇｕｎｎ器件相反，说明了两种器件的不同工作机理。最后通过对低Ａｌ组份势垒结构的计算说明了Ｘ谷电子注入对器件工作的重要作用。     

利用正则化方法求解浅海声波散射问题

讨论了浅海中波导的声波散射问题，我们将该问题归结为一个第一类边界积分方程，利用正同化方法求解，并证明了该方法的收敛性，数值例子表明了该方法的简单与有效性。     

微波单片集成电路的成品率优化

采用建立管芯等效电路模型、灵敏度分析以及统计勘探法对微波单片集成电路进行成品率优化，并编制了软件，加入到ＧａＡｓＩＣＣＡＤ系统中。应用该软件对Ｘ波段低噪声ＭＭＩＣ、超宽带ＭＭＩＣ放大器进行了设计，成品率有较大的提高，电路性能有所改善。     

Conformational Molecular Switches for Post-CMOS Nanoelectronics

Theoretical treatments forecast that bistable CMOS devices using electronic charge as a state variable will operate at their maximum thermal dissipation limit possibly as early as 2012. The problem is further compounded by increasing manufacturing challenges associated with the ever decreasing logic switch dimensions. These challenges require the development of new fabrication strategies that replace or complement current top-down lithography with bottom-up protocols using controlled self-assembly of nanomaterial building blocks. To answer some of these issues, this paper focuses on a new device paradigm consisting of an arene-metal-arene conformational switch, addressable through capacitive, inductive, or resonant-tunneling field coupling. The operating principle is based on voltage-tunable modulation in quantum electron transmission. The switch is open (off) when the metal ion is displaced to a position at a C-H bond on the arene ring due to an externally applied bias. Conversely, when the external bias is removed, the metal ion moves to an axis- symmetric position on the arene ring, and the switch is closed (on). The paper presents a summary of the architecture, operating principle, and advantages of the conformational switch, along with associated findings from proof-of-concept theoretical and experimental studies of its target specifications and performance. The paper also discusses opportunities and challenges related to the integration of conformational switches into hybrid CMOS-molecular and monolithic (all molecular) circuits.     

p+209Bi核反应微观数据的理论计算

利用光学模型、激光模型、蒸发模型及扭曲波玻恩近似理论,对入射能量从阈能到300MeV,p+²⁰⁹Bi的中子反应截面、剩余核截面、出射粒子的多重数进行了理论计算及分析,并将计算结果与实验数据进行了比较.同时得到一组能量到50?0MeV与实验数据符合很好的光学势参数.