硫酸介质中Ti／SnO2／PbO2析氧阳极的研究

由于硫酸溶液具有高的电导、一般条件下性质稳定、价格相对低廉等优点，所以电化学合成大多在硫酸溶液中进行．阳极析氧是电化学合成不可避免的阳极过程．但因硫酸的强腐蚀性，以及从阳极析出的氧的强氧化性，使得能满足工业生产的阳极材料很缺乏．自１９５０年荷兰Ｈｅｎ...     

细胞动力学研究VIII.Na2SeO3对黑根菌作用特征

The Characteristics of the action of Na2SeO3 on Rhizopus nigrocans has been studied by means of microcalorimetry, the relationship between growth rate constants and the concentration of Na2SeO3 is
k=0.03608exp[-0.003608(c+8.60)2]
It was found that Na2SeO3 of low concentration has promoting action on the growth of Rhizopus nigrocans cells, and high concentration of Na2SeO3 has inhibitory action. The study has provided a lot of information on the bioaffect of selenium and the research of toxicology.     

Effect of surface mobility on the particle sliding along a bubble or a solid sphere

The sliding velocity of glass beads on a spherical surface, made either of an air bubble or of a glass sphere held stationary, is measured to investigate the effect of surface mobility on the particle sliding velocity. The sliding process is recorded with a digital camera and analyzed frame by frame. The sliding glass bead was found to accelerate with increasing angular position on the collector's surface. It reaches a maximum velocity at an angular position of about 100 degrees and then, under certain conditions, the glass bead leaves the surface of the collector. The sliding velocity of the glass bead depends strongly on the surface mobility of a bubble, decreasing with decreasing surface mobility. By a mobile surface we mean one which cannot set up resistive forces to an applied stress on the surface. The sliding velocity on a rigid surface, such as a glass sphere, is much lower than that on a mobile bubble surface. The sliding velocity can be described through a modified Stokes equation. A numerical factor in the modified Stokes equation is determined by fitting the experimental data and is found to increase with decreasing surface mobility. Hydrophobic glass beads sliding on a hydrophobic glass sphere were found to stick at the point of impact without sliding if the initial angular position of the impact is less than some specific angle, which is defined as the critical sticking angle. The sticking of the glass beads can be attributed to the capillary contracting force created by the formation of a cavity due to spontaneous receding of the nonwetting liquid from the contact zone. The relationship between the critical sticking angle and the particle size is established based on the Yushchenko [J. Colloid Interface Sci. 96 (1983) 307] analysis.     

与时俱进，不断开创物理化学课程建设新局面

As a necessary basic theory course for undergraduates majoring in chemistry, materials, pharmacy, chemical engineering, and biology, physical chemistry plays an important role in cultivating talents to meet the needs of social and economic development. Over the years, the teaching team of physical chemistry of East China University of Science and Technology has carried out the curriculum reform and innovation persistently based on "Team building as the foundation, resource building as the root, mode innovation as the soul, ability training as the origin". This paper will summarize our thinking and experience in striving for the first-class course from the aspects of first-class team construction, first-class resource construction, teaching connotation innovation, teaching mode exploration, and extract the experience that can be used as reference by teaching peers.     

A CS-AdaBoost-BP model for product quality inspection

Quality inspection is essential in preventing defective products from entering the market. Due to the typically low percentage of defective products, it is generally challenging to detect them using algorithms that aim for the overall classification accuracy. To help solve this problem, we propose an ensemble learning classification model, where we employ adaptive boosting (AdaBoost) to cascade multiple backpropagation (BP) neural networks. Furthermore, cost-sensitive (CS) learning is introduced to adjust the loss function of the basic classifier of the BP neural network. For clarity, this model is called a CS-AdaBoost-BP model. To empirically verify its effectiveness, we use data from home appliance production lines from Bosch. We carry out tenfold cross-validation to evaluate and compare the performance between the CS-AdaBoost-BP model and three existing models: BP neural network, BP neural network based on sampling, and AdaBoost-BP. The results show that our proposed model not only performs better than the other models but also significantly improves the ability to identify defective products. Furthermore, based on the mean value of the Youden index, our proposed model has the highest stability.

     

非全局Lipschitz条件下跳适应向后Euler方法的强收敛性分析

本文研究跳适应向后Euler方法求解跳扩散随机微分方程在非全局Lipschitz条件下的强收敛性.通过克服方程非全局Lipschitz系数给收敛性分析带来的主要困难,我们成功地建立了跳适应后向Euler方法的强收敛性结果并得到相应的收敛率.最后,我们通过数值试验对前文所得理论结果做进一步的验证.     

基于简化的应变梯度理论下Kirchhoff板模型边值问题的提法及其应用北大核心CSCD

考虑应变梯度和速度梯度的影响,建立薄板控制微分方程及给出其边值问题的提法,修正了前人给出的薄板角点条件.采用Levy法,给出受分布力作用下简支板的挠度及自由振动频率的解析解.通过与文献中分子动力学数据对比,验证了该文模型的有效性并提出校核材料参数的一种方法.研究结果表明,增大弹性地基和应变梯度参数可以有效提高板的等效刚度,而速度梯度参数则相反.该文提出的板的边值问题为研究薄板在复杂支撑边界及外荷载等条件提供了理论依据.同时,有望为其有限元法、有限差分法和基于能量原理的Galerkin法等数值方法提供理论依据.     

Sampling Consensus of 2nd-Order Multi-Agent Systems Based on Time-Varying Topology北大核心CSCD

基于速度一致位移差保持不变的一致性概念,研究了二阶多智能体系统在时变拓扑下的采样一致性问题。首先,引入虚拟领导者,将具有时变拓扑结构的多智能体系统的采样一致性问题转换为误差系统的采样控制稳定性问题。其次,通过预估采样误差,研究采样误差对系统达到一致性的影响。最后,应用Lyapunov稳定性理论,分析所构造的误差系统的稳定性,并给出该误差系统最终稳定的充分条件。数值仿真结果验证了理论分析的有效性和正确性。     

第II类双边拆卸线平衡问题建模与优化

报废汽车体积大,废弃物污染大,拆卸过程复杂,将作业任务均衡分配难。为此,本文对工作站数量确定的双边拆卸线平衡问题进行研究,建立问题数学模型,设计一种变邻域蛙跳算法。所提算法在寻优过程中采用变邻域搜索提高族群局部搜索效率;引入个体学习机制加快精英个体进化速度;提出基于二分法的节拍时间调整策略加快对最优节拍的搜索。最后,通过算例对算法性能进行验证并通过实例说明任务在拆卸线上平衡分配的重要性。     

Multiple attribute decision-making method based on projection model for dual hesitant fuzzy set

Fuzzy Optimization and Decision Making - In the decision-making process, retaining the original data information has become a most crucial step. Dual hesitant fuzzy sets (DHFS), which can reflect...