Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

Quantitative determination of glutathione in single human erythrocytes by capillary zone electrophoresis with electrochemical detection

Glutathione (GSH) in single human erythrocytes is determined by capillary zone electrophoresis with end-column amperometric detection at a gold/mercury amalgam microelectrode. A capillary of 10 microm inner diameter is suitable for determination of GSH in an individual erythrocyte with a good signal-to-noise ratio. The limit of detection is 1 x 10(-7) mol/L or 26 amol and the linear dynamic range is 2 x 10(-7) to 2 X 10(-5) mol/L for the capillary. In this method, the calibration line is obtained with a capillary adsorbed before a certain amount of hemoglobin can be used for the quantification of GSH in the external standardization. The whole cell injection and the lack of necessity of a derivatization reaction lead to more accurate and precise results, which are closer to the macroscopic values of glutathione in human red blood cell (i.e., hemolysate) than those determined by indirect laser-induced fluorescence detection.     

Development of a new reaction system for the synthesis of highly optically active alpha,gamma-substituted gamma-butyrolactones

A highly useful method for the synthesis of optically active alpha,gamma-substituted gamma-butyrolactones has been developed. The SmI(2)-induced reductive coupling of chiral 2-alkyl acrylates derived from isosorbide with ketones in the presence of (1S)-(-)-2,10-camphorsultam as a proton source give the chiral alpha,gamma-substituted gamma-butyrolactones in good yields and high enantiomeric purities (up to >99% ee for trans and 75% ee for cis). The reaction system has been investigated with various ketones, and it is demonstrated that this system is very effective for trans-alpha,gamma-substituted gamma-butyrolactones. Both the chiral auxiliary and the hindered proton source in this system are necessary for the observed excellent ee values of the products. The absolute configuration of the trans products is assigned on the basis of the X-ray crystal structure.     

{Pt

Prolonged evacuation of [{Pt(CO)(3)}(2)](2+) (1), the first homoleptic, dinuclear, cationic platinum(I) carbonyl complex, results in reversible disproportionation. Complex 1 was formed by dissolution of PtO(2) in concentrated H(2)SO(4) under an atmosphere of CO [Eq. (a)], and completely characterized by NMR ((13)C, (195)Pt), IR, and Raman spectroscopy.     

DOPING LEVEL INCREASE OF POLY(3-METHYLTHIOPHENE)FILM DURING ELECTROCHEMICAL POLYMERIZATION PROCESS

The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have beenelectrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in borontrifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated byexcitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film wasincreasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bandsassigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm~(-1),respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrationsincrease with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach toimproving the doping level of as-grown thin compact PMeT film.     

Enhanced electrical conductivity in chemically modified carbon nanotube/methylvinyl silicone rubber nanocomposite

Chemically modified multiwalled carbon nanotubes/methlyvinyl silicone rubber (m-MWNT/VMQ) nanocomposites with relatively good dispersion of nanotubes were prepared by treating the surface of MWNT using γ-aminopropyltriethoxy silane (KH550). Significant enhanced electrical conductivity was discovered in the m-MWNT/VMQ nanocomposites. The results could be attributed a strong interaction between m-MWNT and VMQ which was from the chemically modification of the surface for MWNT. The electrical property was also discussed in order to understand the percolation and electrical transport mechanism. The m-MWNT/VMQ nanocomposites with high conductivity in this study are promising application as one of novel functional materials.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐Molybdate(II) Anions: Synthesis,Spectroscopy, and Density Functional Theory Calculations

Carbonyldinitrosyltris(fluorosulfato)tungstate(II) and ‐molybdate‐(II) anions, [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo), which are novel weakly coordinating anions that contain a metal carbonyl/nitrosyl moiety, have been generated in fluorosulfonic acid and completely characterized by multinuclear NMR, IR, and Raman spectroscopy as well as ESI mass spectrometry. ESI MS measurements performed for the first time on a superacidic solution system unambiguously reveal the formation of the monoanionic, mononuclear W and Mo complexes formulated as [M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo). Multinuclear NMR spectroscopic studies at natural abundance and ¹³C and ¹⁵N enrichment clearly indicate the presence of one CO ligand, two equivalent NO ligands, and two types of nonequivalent SO₃F^? groups in a 2:1 ratio. The IR and Raman spectra reveal that the two equivalent NO ligands have a cis conformation, thus indicating a fac structure. Density functional calculations at the B3LYP level of theory predict that these anions have a singlet ground state (¹A′) with a C_s symmetry along with C–O and N–O vibrational frequencies that are in agreement with the experimental observations. Mulliken population analysis shows that the monovalent negative charge is dispersed on the bulky sphere, the surface of which is covered by all the negatively charged O and F atoms with charge densities much lower than SO₃F^?, suggesting that [fac‐M(CO)(NO)₂(SO₃F)₃]^? (M=W, Mo) are weakly nucleophilic and poorly coordinating anions.     

Application of the slotted quartz tube in flow-injection flame atomic-absorption spectrometry

The slotted quartz has been applied to flow-injection flame atomic-absorption spectrometry (FI-FAAS) showing several important advantages. The tube life was improved by a factor of 5-6 compared to conventional continuous aspiration. Flow impact systems were found not to be necessary in the applications so that larger enhancement factors may be achieved without sacrifice in precision. For 1.0 mg/l. copper, 1.0 mg/l. lead, 0.1 mg/l. cadmium and 1.0 mg/l. gold sensitivity enhancement factors of 3.1, 5.5, 5.3 and 4.0 were obtained with precisions of 1.3%, 1.1%, 1.6% and 1.7% RSD (n = 11) respectively. Application of the slotted quartz tube FI-FAAS method to the determination of heavy metals in urine has shown improved tolerance to interfering matrices. Recoveries obtained by spiking undiluted urine samples with 0.1 mg/l. copper and lead, and 0.01 mg/l. cadmium were in the range 100-102%.     

光学解偏振法测定高聚物的结晶速度

制成了光学解偏振法测定高聚物结晶过程的仪器,测试了聚丙烯、尼龙6等几种试样。本方法的优点是:样品用量少,测试温度范围宽,可以测定较快的结晶过程。由于设计了透射光强度自动控制电路,实验结果可靠,重复性好,并能自动记录。