微波场中Josephson结的微波发射与吸收研究

采用数值仿真方法,研究微波场中约瑟夫森结微波感应台阶处的功率特性。发现微波场中约瑟夫森结不止吸收辐射,也发射辐射的情况。得到微波辐照和结电阻对功率吸收和发射的影响规律。结果表明,处于发射功率的状态对应的偏置电流范围占整个台阶总电流范围的比例可以趋于50%。这一发现对约瑟夫森结理论和应用研究具有重要的意义。     

Dual-band frequency selective surface with quasi-elliptic bandpass response

Based on the substrate integrated waveguide technology,we present a dual-band frequency selective surface(FSS) with a quasi-elliptic bandpass response.The characteristics of the quasi-elliptic bandpass response are realized by shunting two substrate integrated waveguide cavities of different sizes,with the same slots on both sides of the metal surfaces.Four cavities of different sizes and two slots of different sizes are used to design the novel FSS.Every bandpass response with sharp sidebands is induced by two transmission nulls that are generated by the coupling between the slot aperture resonance and the cavity resonance.The simulation results show that such dual-band FSS has the advantages of high selectivity and stable performance at different oblique incident angles.Moreover,it is easy to fabricate.     

红外偏振成像对伪装目标的探测识别研究

针对目前普通光电成像系统对伪装目标的探测和识别概率较低的状况,提出伪装目标的探测识别新技术研究。介绍了红外偏振成像系统的原理、组成和特点,研制的中波/长波红外偏振成像装置,其波段范围为3 m ~5 m和8 m~12 m,线偏振度95%,消光比大于100∶1,给出了试验分析数据和偏振融合效果图。研究表明,采用红外偏振成像技术可以有效地实现对地面伪装目标的探测和识别。研究结果还可以扩展到对人工假目标、空中隐身目标等的探测和识别。     

大气湍流光学参数分析

利用两种不同大气湍流结构常数模型,讨论了不同高度的湍流对大气湍流光学参数的影响。通过理论计算得出:相干长度和对数振幅起伏方差主要由低层大气湍流决定,而等晕角、倾斜等晕角、格林伍德频率和泰勒频率由对流层顶附近的高层湍流决定。分析了垂直高度30 km以下的3部分大气湍流对等晕角的贡献比例,在给定的不同强度湍流下,对流层顶附近的高层大气湍流贡献比例都大于25％,而低层大气湍流的贡献比例都小于3%。     

W波段交错双栅返波振荡器高频系统

将矩形交错双栅结构作为慢波电路并提出与之配套的过渡结构和输出耦合器,设计了利用带状电子注工作在W波段的返波振荡器。提出的过渡结构和耦合器解决了该类直波导型器件的信号传输衰减大、反射强等难题。相对于传统圆形电子注器件,该器件得到了较大的功率提升。利用三维粒子模拟计算的方法,在电流12 mA时通过调节工作电压,在92~98 GHz频带内得到了数W的稳定平均功率输出,信号中心频率非常接近设计频率,且单色性好,谐波分量小。     

噪声诱导的二维复时空系统的同步研究

研究了一类噪声诱导的二维复时空系统的同步问题.首先讨论了二维复Ginzburg-Laudau(CGL) 方程随时间和空间变化的时空混沌特性;其次,研究了时空噪声驱动下CGL系统的同步问题.理论上利用线性稳定性分析,得到了常数激励下CGL系统达到稳定态的临界强度;结合噪声的随机性和非零均值特性, 揭示了噪声诱导同步的机理;并从理论上和数值上分别给出了达到同步所需要的控制参数和噪声强度满足的条件,实现了两个非耦合CGL系统的完全同步.结果表明,数值模拟和理论分析有很好的一致性.     

First-principles study on the electronic structure and magnetism of layered oxyselenide La2Mn2Se2O3

The electronic structure and magnetism of layered oxyselenide La(2)Mn(2)Se(2)O(3) have been studied by using first-principles calculations within the generalized gradient approximation (GGA) and GGA + U methods. The G-type antiferromagnetic (AF) state is calculated to be the most stable phase among the various magnetic configurations of interest, irrespective of the choice of the functional used, which is in good agreement with the experiments. In contrast to La(2)Fe(2)Se(2)O(3) and La(2)Co(2)Se(2)O(3), in which the AF states show metallic behavior under the GGA method, we predict the ground state of La(2)Mn(2)Se(2)O(3) is a semiconductor with an indirect band gap of ～0.52 eV via the GGA calculations. This is closely related to a closed shell configuration and large exchange splitting (～3.5 eV) in the Mn 3d states. Moreover, the magnetic properties are also discussed in terms of the calculated Heisenberg spin exchange constants, suggesting that La(2)Mn(2)Se(2)O(3) is a strong two-dimensional magnetically frustrated system.     

Tunable self-shifting Bloch modes in anisotropic hexagonal photonic lattices

We study controllable self-shifting Bloch modes in anisotropic hexagonal photonic lattices. The shifting results from a deformed band structure due to deformation of the index distribution in each unit cell. By reconfiguration of the index profile of the unit cell, the direction in which the Bloch modes move can be controlled. Our theoretical predictions are experimentally demonstrated in hexagonal lattices optically induced in an anisotropic nonlinear crystal.     

Biomimetic compound eye with a high numerical aperture and anti-reflective nanostructures on curved surfaces

Biomimetic compound eyes with a high numerical aperture on a curved surface were successfully fabricated by intelligent integration of traditional top-down and bottom-up micro- and nanofabrication methods together. In addition, the new hybrid micro- and nanofabrication method allows us to fabricate the antireflective nanostructures on each ommatidium to increase its vision sensitivity by improving the light transmission. The fabricated compound eye was optically characterized and was shown to have a numerical aperture of 0.77 for each ommatidium. Furthermore, it is shown that the transmission of the compound eye can be improved by 2.3% for the wavelength of 632.8 nm and a clearer image can be formed by the fabricated compound eye with antireflective nanostructures compared with that without antireflective nanostructures. In addition, the developed hybrid manufacturing method can be adapted to the fabrication of other complex micro- and nanodevices for photonics or other research areas.