探针馈电圆柱共形微带天线阻抗特性的FDTD法分析

将圆柱坐标系下非分裂式理想匹配层吸收边界条件(UPML)引入到圆柱共形微带天线的全波分析中，并给出了其中的场量迭代方程，明显地减小了计算空间，简化了编程；提出了圆柱坐标系下考虑有限尺寸探针半径的新算法，使得计算结果更加精确；应用GPOF方法预估了时域晚时响应，使计算时间减少了70％～90％。本文给出的模型能够对任意多层圆柱共形结构的微带天线进行计算，因此对此类天线的CAD设计具有实际意义。     

对等网络中的信息安全

近年来，对等网络得到迅速发展，其广泛应用促进了信息技术的发展，也带来了一系列的安全问题。介绍了对等网络中若干安全问题，并针对这些问题，分析并给出了相应的安全保障策略，最后对P2P中的信息安全问题的未来做了展望。     

USB数据传输中CRC校验码的并行算法实现

文章介绍了用于USB总线数据传输的CRC校验的原理和算法，并且采用并行电路实现USB2．0中的CRC产生和CRC校验，与传统的串行电路实现相比，并行电路实现方法虽然在芯片面积上大于串行电路实现，但由于降低了时钟频率，电路更容易综合实现，并且大大降低了功耗，有利于低功耗电路设计。     

Multi-level attention model for tracking and segmentation of objects under complex occlusion

A multi-level attention framework for tracking and segmentation of humans and objects under complex occlusions is investigated, featuring an effective probabilistic appearance-based technique for pixel reclassification during object grouping and splitting. A novel ’spatial-depth affinity metric’ is introduced in the conventional likelihood function, utilising information of both spatial locations of pixels and dynamic depth ordering of the component objects in grouping. Depth ordering estimation is achieved through a combination of top-down and bottom-up approach. Experiments on some realworld difficult scenarios of low quality and highly compressed videos demonstrate the very promising results achieved.     

贴片机脱机编程的快捷方法

SMT生产线中的大多数加工设备均为数控设备。它们编程所需要的大多数特征数据均可从CAD设计系统中得到。文章介绍了如何从CAD设计系统中导出X、Y坐标数据,并转换成贴片数据的方法和思路,以期引起更多的同行加入到这方面的研究中。     

贴片设备的选择

随着电子工业的飞速发展,贴片设备已被广泛应用于大规模电子组装生产上。文章就贴片机选型时应注意的几个关键技术问题作简单介绍,希望对企业选择贴装设备有一定的帮助。     

基于"层"模式的双机容错系统

容错技术广泛应用于各个行业来保证系统的冗余和可靠性。文章在分析比较当前的双机容错系统的性能优缺点后,提出了一种全新的基于“层”模式的双机容错系统解决方案。按照这种模式,可以从链路层到应用层构建一个通用的系统级的双机容错系统。文章对其实现的关键技术进行了阐述。     

一种基于无理数加密算法的数字签名方案

为了提高现代网络信息传输的安全性,利用无理数小数点后数字的无穷性、无规律性、分布均匀性,提出一种全新的加密算法,并用它所产生的密钥流进行数字签名,实现身份验证不可抵赖、信息传输无篡改,确保信息传输的完整性、真实性,达到提高加密效率、相互认证的效果。     

Ad Hoc与无线网络的扩展性研究

Ad Hoc作为无线网络的具有高抗毁性和灵活性的扩展网络,日益引人关注。本文首先从环绕网的理念入手,介绍Ad Hoc作为现有无线网络扩展的意义和优势,然后重点分析并提出融合策略以及需要思考的问题。     

On the Feasibility of Growing Pb[(Zn1/3Nb2/3)0.91Ti0.09]O3 Single Crystals

Pb[(Zn_1/3Nb_2/3)_0.91Ti_0.09]O₃ (PZNT91/9) single crystals were grown by two methods: from solution using PbO as a self‐fluxing agent (SC method) and directly from the melt without fluxing (MC method). In both growth methods, an allomeric Pb[(Mg_1/3‐Nb_2/3)_0.69Ti_0.31]O₃ (PMNT69/31) single crystal was used as a seed. X‐ray diffraction patterns of ground crystals showed that phase‐pure perovskite PZNT91/9 single crystals were successfully fabricated by the above two methods. The composition of the crystals obtained by both the SC and MC methods was analyzed using X‐ray fluorescence, which confirmed that the crystal composition is close to the nominal value, although volatilization of PbO and segregation during crystal growth are inevitable. The MC PZNT91/9 crystals exhibit excellent piezoelectric properties, with the piezoelectric constant, d₃₃, in the range of 1800–2200 pC N^–1. This value is comparable to that of the SC crystals. However, the MC crystals show an abnormal dielectric behavior. In contrast with the SC crystals, in the MC crystals a much broader dielectric peak appears in the dielectric response curves, accompanied by a much lower peak temperature of around 105 °C. Furthermore, frequency dispersion is apparent over a much wider temperature range (even more apparent than in pure relaxors), where a large, i.e., about 70 °C, full width at half maximum (FWHM) for the dielectric peaks is observed in the dielectric response. It is speculated that such an unusual phenomenon correlates with defects, microinhomogeneities, and polar regions in the as‐grown MC crystals. The origins of this abnormality have not been interpreted in detail until now. However, optical observation of the domain structure confirms that both the SC and MC crystals possess complex structural states.